User Guide

19
Output Rate: Sets the sampling rate for the audio.
• Auto: Audio output is based on the rate of the input media or file.
• 44.1k: Audio is output at 44.1 kHz.
• 48k: Audio is output at 48 kHz.
• Ext (AES): Uses an external clock (AES/EBU) to output audio.
Note: When the external clock is 96 kHz, audio is output according to the sampling rate of the
playback file if the playback file has a sampling rate other than 96 kHz.
Note: DN-900R converts the output sample rate sent to Dante back to the Dante sample rate.
Line/Mic Lch: Sets the mode for the XLR left channel.
• Line: Set to the line input.
• Mic: Set to the microphone input.
Line/Mic Rch: Sets the mode for the XLR right channel.
• Line: Set to the line input.
• Mic: Set to the microphone input.
Phantom Lch: Sets phantom power (+48V) for the Line/Mic Lch.
• Off: Turns phantom power off for the left channel.
• On: Turns phantom power on for the left channel. However, when Line/Mic Lch is set to
Line, phantom power will be off.
Phantom Rch: Sets phantom power (+48V) for Line/Mic Rch.
• Off: Turns phantom power off for the right channel.
• On: Turns phantom power on for the right channel. However, when Line/Mic Rch is set
to Line, phantom power will be off.
Mic In Sens Lch: Adjusts the XLR mic input sensitivity for the left channel in 1 dBu increments.
• -16 dBu / -40 dBu / -60 dBu
Mic In Sens Rch: Adjusts the XLR microphone input sensitivity for the right channel in 1 dBu
increments.
• -16 dBu / -40 dBu / -60 dBu
Volume Input: Sets the analog recording input level.
• Fixed (0 dB): The recording input level is fixed at 0 dB.
• Variable: The recording input level may be adjusted from -60 / 0 / 10 dBu in 0.1 dB
increments.