Professional DIGITAL DJ Mixier DN-X600 Owner’s Manual
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA IMPORTANT TO SAFETY WARNING: To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFOR-MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. FCC INFORMATION (For US customers) CAUTION 1.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA CAUTION: (English) To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. Do not expose batteries to excessive heat such as sunshine, fire or the like.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH nn OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA AVERTISSEMENTS AVVERTENZE ADVERTENCIAS WAARSCHUWINGEN VARNINGAR • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Manipuler le cordon d’alimentation avec précaution. Tenir la prise lors du débranchement du cordon.
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA CAUTION • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • Attention should be drawn to the environmental aspects of battery disposal. • The apparatus shall not be exposed to dripping or splashing for use.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.
Before use Contents Accessories Before use··················································································1 Fader start function· ···························································12 Accessories·····················································································1 About this manual·········································································1 Main features··················································································2 Cautions on
Troubleshooting • About Care • Wipe the cabinet and control panel clean with a soft cloth. • Follow the instructions when using a chemical cleaner. • Benzene, paint thinner or other organic solvents as well as insecticide may cause material changes and discoloration if brought into contact with the unit, and should therefore not be used. USB settings • Moving the unit Turn off the power and unplug the power cord from the power outlet.
Part names and functions Top panel For buttons not explained here, see the page indicated in parentheses ( ). E2 E3 E4 E5 E6 E2 q USB enable display (USB) • Lights a pale blue color when connected to a computer. • Lights a deep blue color when MIDI command is sent.
W6 MIC/AUX1 input selection button (SELECT)························································· (9) (MIC/AUX1)···················································· (9) W8 SIG/PK display··············································· (9) u meter display switch · ································ (14) y t r E9 Master level mode display (MASTER) • Lights red for the master output mode. • Off for the channel input mode.
Rear panel Q3 q Q2 w Q1 e r t y Q0 u o i q Power switch (POWER)································ (9) w Master output (balanced) terminal y Audio input terminal (AUX1 IN)··················· (6) u Audio input terminal (CH1, CH2)················· (6) (MASTER OUT)·············································· (7) Pin layout: 1. Ground (GND) 2. Hot (HOT) 3. Cold (COLD) Suitable connector: Cannon XLR-3-31 or equivalent.
Before use Connections NOTE Input terminal connection Part names and functions Input from external devices  External device 2 AUDIO OUT L R Preparations AUDIO OUT L R SIGNAL GND Turntable 1 SIGNAL GND AUDIO OUT L R L R L R L R L R L R L R CD player 1 Select the cables according to the equipment being connected.
Input terminal connection Mic connection Output terminal connections Output to the amplifier Connection of the booth output terminal   nnTo switch to monaural audio output If active speakers or other audio monitors are connected to the booth output terminal, set the SELECT switch to ”A”. Set the monaural selection switch to ”ON”. • When this is ”OFF”, audio is output in stereo. XLR Active speakers etc. AUDIO IN L R Connect a microphone to this balanced jack using an XLR connector.
Connecting the power cord Insert the plug into the AC outlet. NOTE  Connections Insert the plug fully and securely into the socket. Incomplete connection to the power supply may cause damage to the unit, or noise. When an external effects processor is connected to the EFX SEND and EFX RTN terminals, set the SELECT switch to ”B”.
Basic operation LEVEL SOURCE SEL POWER MASTER BEATo,p TAP LEVEL ON/OFF(MIC) MIC TRIM DUCKING MIC MIC 表示 LED SELECT 1 Press POWER. The power to the unit switches on, and the BPM display is shown. nnTo apply effects to the mic input Press EFX INS (MIC/AUX1). nnTo activate the ducking function The ducking function attenuates the master output sound signal level when mic input is detected. It prevents the mic volume being covered by the music volume when a mic is used. Press DUCKING.
BeatBreaker function Type of Effect and operation detail. This function breaks down the music signals in each bar into 16 quarter-beat sections, replaces the beats in these sections with a preset beat pattern, and then replays the musical signal to achieve an effect in which the original beat has been replaced with the new beat. No Details of operation Effect Name Details of Effect Operation Adds reverberation signals that are delayed according to the beat setting time.
EFX INS EFX SEND BEATo,p TAP Operating the effector Press EFX SEND for the channel that you want to 1 apply the effector to. • The input source sound signal is sent to the effector. • To apply the effector to the mic input or master output, press EFX INS. 2 Set the BPM. BPM is the base value for the effector. To obtain normal effects, match the BPM value with the BPM of the track. The following three setting methods are available for the BPM value.
The fader start function controls playback/pause of the CD/Media player using the fader control on the unit by sending a fader command to the player. Connect the FADER terminal on this unit to a FADER compatible DJ player using a 3.5mm stereo mini plug cable in advance. The player switches to CUE up status. The CD player starts playback. If the channel fader knob is then moved all the way down, the player stops. The player starts playback.
Fader curve adjustment Adjusts the startup response of the channel fader/cross fader. nnAdjust the channel fader curve  Adjusting the cross fader torque 1 Remove the rubber cap on the front panel. Intermediate curve characteristics. USB settings EFX INS BEATo,p POWER Rubber cap Slow startup curve characteristics. Fast startup curve characteristics.  the cross fader to the far right edge so that the 2 Move screwdriver will line up with the screw head inside.
1 While pressing MASTER, press BEAT o, p. 2 Press BEAT o,p to select the USB audio mode. The displayed sampling frequency is selected and saved. NOTE IndeX 3 Press TAP. System diagram • For Windows PC users: If ASIO driver version 1.01 is already installed for other Denon DJ product, uninstall it first, and then install the 2.1x version found on the included CD-ROM or our website. You should do this before connecting the DN-X600 to your computer.
Playback using the DVS function SOURCE SEL The DVS (Digital Vinyl System) function performs playback operations of music files such as MP3 or WAV that are stored on the computer by operating the software timecode signal from a turntable or CD/ Media player. If this function is used, you can use the player's outstanding operability to play back music files on the computer. To use the DVS function, you need the following devices.
nnMIDI command list items 0xBn 0x02 0x00 to 0x7F EQ MID VR 0xBn 0x03 0x00 to 0x7F EQ LOW VR 0xBn 0x04 0x00 to 0x7F FADER 0xBn 0x05 0x00 to 0x7F EFFECT SEND SW ON : 0x9n/SW OFF : 0x8n 0x01 SW ON : 0x40/SW OFF : 0x00 CUE 0x03 SW ON : 0x40/SW OFF : 0x00 0xBn 0x08 0x00 to 0x7F EQ MID VR 0xBn 0x09 0x00 to 0x7F EQ LOW VR 0xBn 0x0A 0x00 to 0x7F FADER 0xBn 0x0B 0x00 to 0x7F EFFECT SEND SW ON : 0x9n/SW OFF : 0x8n 0x05 SW ON : 0x40/SW OFF : 0x00 CUE SW ON : 0x9n/SW OFF : 0x
Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in this owner's manual? 3. Is the external device (player or effects processor) operating correctly? If this unit does not operate properly, check the items listed in the table below. If the symptom is not covered on the check list, contact your dealer or service centers. Service centers are listed at http://www.d-mpro.com.
32 bit 128-times oversampling advanced segment CH Fader: Cross Fader: • Power supply: U.S.A. and Canada models: European,U.K. and Asia/ Pacific models: Power consumption: Operating temperature: Operating humidity: Storage temperature: 9 mm (0.35”) 330 mm (13.0”) 315 mm (12.4”) 250 mm (9.8”) 90 mm (3.5”) 112 mm (4.4”) AC 120 V, 60 Hz AC 230 V, 50 Hz 24 W (Less than 0.
Index vvA Automatic standby function·································· 4 vvB Beat····································································· 11 BeatBreaker························································ 10 Beat pattern························································ 10 vvC Cable····································································· 6 Balanced cable···················································· 6 RCA pin plug cable·············································
Before use System diagram Part names and functions Connections Basic operations Effector function Fader Start function USB settings Troubleshooting specifications IndeX System diagram 20