User Guide

10
DN-X400
39 (AIN15) — I — — — L Fixed to GND
40 (AIN16) — I — — — L Fixed to GND
41 (AIN17) PLGIN I — Pu — — Plug connect signal +5V: IN
42 VAREF VAREF — — — — — Analog ref. V (+5V) for AD conversion
43 AVDD AVDD — — — — — Power (+5V)
44 AVSS AVSS — — — — — Analog ref. GND (GND) for AD conversion
45 P00 CHSELB1 O — Pu H H ASSIGN-B CH select signal 1
46 P01 CHSELB2 O — Pu H H ASSIGN-B CH select signal 2
47 P02 CHSELA1 O — Pu H H ASSIGN-A CH select signal 1
48 P03 CHSELA2 O — Pu H H ASSIGN-A CH select signal 2
49 P10 LDDAT1 O — Pd L L LED driver data 1 (PANEL1-F)
50 P11(INT1) TGSW1 I Ed Pu — — SW input interrupt signal for CH1 line select (PANEL1-B)
51 P12(INT2) TGSW2 I Ed Pu — — SW input interrupt signal for CH2 line select (PANEL1-B)
52 P13 LDDAT2 O — — L — LED driver data 2 (PANEL1-F)
53 P14 LDSEL1 O — Pu H H LED line control signal 1,L: On (PANEL1-F)
54 P15 LDSEL2 O — Pu H H LED line control signal 2,L: On (PANEL1-F)
55 P16 LDCLK1 O — — L — Clock for LED driver data transfer (PANEL1-F/2)
56 P17 LDDAT3 O — — L — LED driver data 3 (PANEL2)
57 P50 — O — — L — Not used
58 P51 NRESET O — Pd L L DIT reset signal, L: Reset
59 P52 ZSENCE I — — — — DIT ucon interface status
60 P53 YDMUTE O — Pu H H DIT mute signal, H: Mute
61 P54 YMLD O — Pu H H DIT chip enable signal
62 P55 YMDATA O — — L — DIT data send data
63 P56 YMCLK O — — H — Clock for DIT data send
64 P57 — O — — L — Not used
FunctionI/O DET Ext Ini Res
No.
Name Symbol