User Guide

6
6
DN-X1500
5. SAMPLER ASSIGN switch
6.
μ
COM VERSION CHECK
You can check the μcom version at "Preset Functions".
Please refer to the Instructions Manual.
Function Description Display Remarks
FADER VR
CHECK
(1)When CROSSFADER ASSIGN switch is set
to POST, you can check the fader VR and LED.
①Refer to CROSSFAER ASSGIN.
OFF
(1)When selected OFF, it becomes the LED off
modde.
①Displays ”LED OFF”.
CH1
(1)When selected CH1, it becomes the mode of
reading/displaying CH1 fader VR value.
①Displays ”0”∼ ”100”.
②Fader position is 0 : ”0”
③Fader position is 10 :”100”
CH2
(1)When selected CH2, it becomes the mode of
reading/displaying CH2 fader VR value.
①Displays ”0”∼ ”100”.
②Fader position is 0 : ”0”
③Fader position is 10 : ”100”
CH3
(1)When selected CH3, it becomes the mode of
reading/displaying CH3 fader VR value.
①Displays ”0”∼ ”100”.
②Fader position is 0 : ”0”
③Fader position is 10 : ”100”
CH4
(1)When selected CH4, it becomes the mode of
reading/displaying CH4 fader VR value.
①Displays ”0”∼ ”100”.
②Fader position is 0 : ”0”
③Fader position is 10 : ”100”
MAIN
MIC
(1)When selected MAIN MIC, it becomes the
LED on mode.
① Displays ”LED ON”.
MASTER
(1)When selected MASTER, it becomes the
mode of reading/displaying crossfader VR value.
①Displays ”0”∼ ”100”.
②Fader position is Left side : ”0”
③Fader position is Right side : ”100”