User Guide

DN-X1500

SERVICE MODE SPECIFICATION

*How the product performs when the operation buttons for μcom control are pressed (including control input) is described in

the table below.

1. POWER ON

2. CH GAIN VR

3. MASTER LEVEL VR

4. (SAMPLER) CROSSFADER ASSIGN switch

Function Description Display Remarks

POWER

(1)Turns power ON/OFF.

Service

Mode

(2)Switches power ON when OFF.

① Enters in the service mode when power on

while pressing MIC POST ON/OFF button and

E F F E C T L O O P O N / O F F b u t t o n .

② For canceling the service mode, turn power off/on.

① Displays ”Service”. ①Refer to CH GAIN VR.

②Refer to MASTER LEVEL VR.

③Refer to SAMPER ASSIGN.

④Refer to CROSSFADER ASSIGN.

Function Description Display Remarks

CH LEVEL

METER

(1) When you turn this VR, LED of CH level meter

is lit.

① VR position is 0 : LED is not lit.

② VR position is 10 : All LED is lit.

Function Description Display Remarks

MASTER

LEVEL

METER

(1) When you turn this VR, LED of master level

meter is lit.

①VR position is 0 : LED is not lit.

② VR position is 10 : All LED is lit.

Function Description Display Remarks

FL mode

(1) You can select FL display mode.

① A : FL tube is not lit.

② B : All FL tube is lit.

③ POST : Displays VR checking or

LED checking.