TUNER-5CD CHANGER DN - H800 OPERATING INSTRUCTIONS TUNER / 5CD CHANGER DN-H800 POWER 2 SHIFT /PTY ON TUNING PRESET 1 4 3 AUTO/ MANU BAND 5 DOWN MEMORY UP DISPLAY SEARCH /CHA 1 TUNER 2 3 ON/OFF 1 2 4 5 DISC SELECT 3 6 7 4 9 0 /CLEAR PROGRAM /DIRECT CALL SKIP +10 RANDOM REPEAT 8 5 OFF OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM STOP DISC PHONES 2 3 4 5 DISC P.
ENGLISH IMPORTANT TO SAFETY • FOR U.S.A. & CANADA MODEL ONLY CAUTION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord.
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. 12.
ENGLISH ESPAÑOL FRONT PANEL 482.6 465.8 q w TUNER / 5CD CHANGER r y i !0 e t u o !1 TUNING PRESET 1 2 SHIFT /PTY 4 3 AUTO/ MANU BAND 5 DOWN MEMORY UP DISPLAY 1 TUNER 2 4 3 1 5 6 DISC SELECT 3 ON/OFF SEARCH /CHA 2 7 4 9 0 /CLEAR PROGRAM /DIRECT CALL SKIP +10 RANDOM REPEAT 8 5 OFF 57.2 132 !3 !4 !5 !7 !8 @0 !6 !9 DN-H800 POWER ON !2 OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM STOP DISC PHONES 1 2 3 5 TP PTY REMOTE SENSOR TRACK DISC P.
ESPAÑOL ENGLISH NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION • Do not let foreign objects in the set. • Keep the set free from moisture, water, and dust. • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Protéger l’appareil contre l’humidité, l’eau et lapoussière. • Ne pas laisser des objets étrangers dans l’appareil. • No deje objetos extraños dentro del equipo. • Mantenga el equipo libre de humedad, agua y polvo. • Eviter des températures élevées.
ENGLISH CAROUSEL TRAY TAPE CAUTION 1. When the unit is to be transported, apply tape as illustrated in the diagram so that the carousel inside the tray does not turn. 2. Always remove all discs from the trays when moving the set. Failure to do so may damage the set. 3. When the power is turned off, the varied level will be cleared and be set to 0 dB. ATTENTION 1.
ENGLISH Thank you for purchasing the DENON TUNER-5CD CHANGER. Read the Operating Instructions thoroughly, and operate this player properly. — TABLE OF CONTENTS — CAUTION: • The DN-H800 will work normally when the player unit is mounted with the front panel within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not load or unload peoperly. FEATURES ……………………………………………………………6 Max.
ENGLISH NAMES OF PARTS AND THEIR FUNCTIONS (Refer to page 4.) FRONT PANEL q • The mode changes as follows each time the button is pressed: Tuning frequency Input character Programme service name (PS) Programme type (PTY) Clock Time (CT) • The following may be displayed if the signals are weak or no RDS service is available. This is not a malfunction. “NO PS” “NO PTY” “NO CT” NOTE: The programme type, programme service name and clock time are not displayed in the MW (AM) band.
ENGLISH !6 Normally the elapsed time for the track currently playing is displayed. When this button is pressed, the display switches to the RANDOM button • Press this button to begin random play. • Pressing this button during stop, and press play button play to full automatic random play. • Pressing this button during playing of a program starts random play of the tracks in the program. (Refer to page 17, item u.
ENGLISH @8 PLAY MODE switch • Use this to select the play mode. • The play mode switch functions in the normal play, program play and random play modes. SINGLE: (single track play mode) The stop mode is set after one track is played. CONTINUE: (continuous play mode) Playback continues on to the next track after one track is played. NOTES: • Repeat playback is not possible in the single mode.
ENGLISH $3 $4 UNBALANCED OUT (SELECTED/TUNER) terminals • These are unbalanced outputs using RCA type terminals. The signal selected with the OUTPUT SELECT switch and the headphones/display select button is output from these terminals. REMOTE Jack • This is a stereo mini jack for wired remote control. For remote circuit connections, refer to page 14.
ENGLISH OPENING AND CLOSING THE DRAWER AND LOADING A DISC Opening and closing the drawer (This operation only works while the power is on.) 1. Press the POWER switch to turn on the power. 2. Press the OPEN/CLOSE button (5). How to load a disc • Make sure the drawer is completely open.
ENGLISH CONNECTIONS 2 Connecting the included antennas Installing the AM loop antenna Tune in an AM station and set the antenna in a position as far AM loop antenna from the system as possible in which distortion and noise is minimum. In some cases it is best to invert the polarities. AM broadcasts cannot be received well if the loop antenna is not Direction of broadcasting station FM antenna 75 Ω/ohms coaxial cable connected or if it is set close to metal objects.
ENGLISH Leave your entire system (including the DN-H800) turned off until all connections between the DN-H800 and other components have been completed. 2 Connecting the DN-H800 to an Amplifier • Before connecting the DN-H800 to your amplifier, it is a good practice to review your amplifier’s instruction manual. • Use the white plugs for the left channel and red plugs for the right channel.
ENGLISH NORMAL PLAY Follow the steps below to get an understanding of the disc play procedure. (1) Starting Playback 2 TUNER / 5CD CHANGER 3 1. Turn the power switch on and press the OPEN/CLOSE ( 5 ) button to open the drawer. DN-H800 POWER TUNING PRESET 1 2 4 3 SHIFT /PTY ON 1 5 AUTO/ MANU BAND DOWN MEMORY UP DISPLAY SEARCH /CHA 1 TUNER 2 4 3 1 5 6 DISC SELECT 3 ON/OFF 2 7 4 9 0 /CLEAR PROGRAM /DIRECT CALL SKIP +10 RANDOM REPEAT 8 5 2.
ENGLISH e To Move to the Next Track during Play …………………………… Automatic Search Press the Automatic/Manual search forward button (7/9) for less than 0.5 seconds during playback.
ENGLISH (4) To clear the entire program • Pressing the PROGRAM/DIRECT button once more erases the entire program. Pressing the OPEN/CLOSE (5 ) button also erases the contents of a program. • Pressing the PROGRAM/DIRECT button while a program is being played cancels the program. Play will then be continuous to the end of the disc currently being played, after which the player will stop automatically.
ENGLISH (4) To Cancel Random Play • Pressing the RANDOM button once more cancels the Random function. Play will then proceed from the track currently being played to the end of the last track on the disc, then stop. Pressing the OPEN/CLOSE ( 5 ) button also cancels the Random function. Cautions • Pressing the RANDOM button during normal play starts full random play. • Pressing the RANDOM button during Program play starts 1.
ENGLISH !1 Playing at a different pitch ……………………… PITCH TUNER / 5CD CHANGER DN-H800 POWER TUNING PRESET 1 2 SHIFT /PTY ON 4 3 AUTO/ MANU BAND 5 DOWN MEMORY UP DISPLAY SEARCH /CHA 1 TUNER 2 3 ON/OFF 1 2 4 5 DISC SELECT 3 6 7 4 9 0 /CLEAR PROGRAM /DIRECT CALL SKIP +10 RANDOM REPEAT 8 5 OFF OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM STOP DISC PHONES 1 3 4 5 RDS PS DISC TP PTY MIN REMOTE SENSOR TRACK P.
ENGLISH LISTENING TO RADIO PROGRAMS Using the Various Functions 1. Using the auto preset memory function This function automatically stores the FM stations which can be received in the area in which the set is being used in the 2. Use the TUNING buttons to select the character for the first place. (The selected character flashes.) preset memory. Use this function so that the RDS functions can be used more effectively.
ENGLISH 3. Press the TUNING button while the RDS indicator is flashing to start a search of all frequencies. 3. TP Search Use this to automatically search and stop at stations which broadcast traffic announcements (even if the station is not Flashes ª currently broadcasting a traffic announcement). Operation 1. Press the SEARCH/CHA button three times. 4. If no other RDS station is found when all the frequencies Flashes ª ª are searched, “NO PROG” is displayed. 2.
ENGLISH USING THE TIMER • Timer recording/playback can be made using any audio timer available on the market. 2 Play the tuner with the timer 1. Make sure the connections are correct, especially the power supply connections. 2 Playing a compact disc with the timer 1. Make sure the connections are correct, especially the 2. Turn “ON” the POWER switch of each appliance. 3. Use the PRESET buttons to set the preset channel number. 4. Set the TIMER switch to the “TUNER” side. power supply connections. 2.
ENGLISH TROUBLESHOOTING Check the following once more before assuming there is a problem with the system. 1. Are connections proper ? 2. Is the system being operated as explained in the operating instructions ? If the system does not seem to be operating properly, check as shown on the table below. If none of these checks apply to the General problem, the system may be malfunctioning. Disconnect the power cord immediately and contact your store of purchase.
ENGLISH SPECIFICATIONS CD SECTION Audio Channel: 2 channel stereo Frequency Response: High Frequency Distortion: 20 ~ 20,000 Hz (±1.0 dB) 0.02 % (1 kHz) Signal-to-noise Ratio: 94 dB Channel Separation: Output: 85 dB RCA jack Output Level: Variable Pitch Control: 2.0 V ±12 % max. Discs: Audio compact discs are used 12 cm (5 in) and 8 cm (3 in) TUNER SECTION Reception frequency band: FM: 87.5 MHz ~ 108.0 MHz AM: 520 kHz ~ 1710 kHz Reception sensitivity: FM: 1.
