PROFESSIONAL SOLID STATE PLAYER DN-F400 OPERATING INSTRUCTIONS
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. CAUTION: (English) To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. VORSICHT: (Deutsch) 3. Heed all warnings. Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den Netzstecker von der Wandsteckdose ab.
NOTE ON USE (English) • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do not obstruct the ventilation holes. • Do not let foreign objects into the unit. • Do not let insecticides, benzene, and thinner come in contact with the unit.
CAUTION: (English) • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the unit. • Do not expose the unit to dripping or splashing fluids. • Do not place objects filled with liquids, such as vases, on the unit.
A NOTE ABOUT RECYCLING: ACERCA DEL RECICLAJE: This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.
– TABLE OF CONTENTS – 1. GENERAL INFORMATION ......................................................................... 2 FEATURES ........................................................................................................... 2 ■ ACCESSORIES Check first that the following accessories are included in the box: q Stereo Audio Cable ............................................................................................................1 PART NAMES AND FUNCTIONS ................................
1. GENERAL INFORMATION FEATURES ■ Standard function • • • • • Playback of music files recorded on an SD card/SDHC card (see page 8) Supporting WAV, MP3 (MPEG-1 Layer III ) Displaying the ID3 tags of MP3 (See page 9) Headphones output with trim (see pages 2 and 6) Analog audio output with trim (balanced/unbalanced) (See pages 3 and 6) PART NAMES AND FUNCTIONS DN-F400 Front panel i PGM RPT o !0 !1 00:45 \ MUSIC \ Honey.
1. GENERAL INFORMATION i DISPLAY button DN-F400 Rear panel • The elapsed time, remaining time, or display off is displayed in order by pressing this button. (See page 9) o LOCK button • Hold the button pressed for more than 1 second to lock out key operation on the front panel. • Hold the button pressed for more than 1 second additionally to release lock-out of key operation on the front panel. !0 4 button • Press this button once to skip to the beginning of the current track or to the previous track.
1. GENERAL INFORMATION DN-F400 Display a s d f RC-F400S Top Panel 00:45 \ MUSIC \ PGM RPT w e g \ MUSIC \ abcdefg.MP3 TRACK Honey.MP3 TOTAL q REPEAT RECUE RANDOM Fordidden Par 2-Travelers ALBUM White Label R HOT LIST 256KB SIZE FORMAT MP3 256kbps 44.1KHz CHANNEL STEREO NOT PLAY ARTIST • Displays the playback mode.
1. GENERAL INFORMATION a Filename display RC-F400S Rear panel • Displays the filename. s Track number display • Displays the track number of a file being played and the total number of tracks. ON OFF POWER RS232C z DC IN 5V x c v d Time display • Displays ELAPSED (elapsed playback time) and REMAIN (remaining playback time). • If the TIME button of the function buttons is pressed, the displayed item is switched. • For more than 100 minutes, “99:59” is displayed.
2. PREPARATIONS INSTALLATION CONNECTIONS ■ Attaching the mounting brackets for a 19-inch 1U half-sized rack ■ Basic connection • The DN-F400 is half the size of 1U. Attach the included rack mounting brackets to the DNF400. Then it can be mounted in an EIA 19-inch rack. 1. Rear panel • DN-F400 The RC-F400S is of desktop type only. Adjust, using a Phillips screwdriver. 1. Remove two screws on the side panel of the DN-F400. 2.
2. PREPARATIONS ■ Connecting the DN-F400 and RCF400S • Use the RS-232C straight cable supplied with the RC-F400S. • After connecting, fix the connector by turning the screws on the connector. ■ Connecting an audio device • Connect an audio device to the analog audio output jacks using the analog audio cables. • For audio connections, balanced type and unbalanced type are available. For connecting to the balanced output connectors, use the included PHOENIX plugs.
3. DEVICE OPERATION ■ Handled audio files as “track” and playing audio file FILE FORMAT FOR PLAYBACK • A folder (also called a “directory”) is a hierarchical level. • After setting media device and searching for all audio files, the DN-F400 assigns each audio file a track number. For example in the illustration below, at first each audio file is assigned a track number. • Folder-AAA, folder-BBB, and folder-DDD contain audio files and can be selected for operations.
3. DEVICE OPERATION ■ DN-F400 display information Filename When an SD card is inserted in the DN-F400, setting information, time information, and text information are displayed on the display unit of the DN-F400. • Displays the filename of the currently selected file. • If there is no filename, “- - -“ is displayed. Setting information Text information 00:45 \ MUSIC \ PGM RPT Time information Honey.
3. DEVICE OPERATION NORMAL PLAYBACK NORMAL PLAYBACK DN-F400 Before starting playback 5,7 RC-F400S 4,6 REMOTE CONTROLLER RC-F400S Before turning the power on, set the MODE switch on the rear panel of the DN-F400 according to the intended use. (See page 11) 1. Set the POWER ON/OFF switch of each device to ON after connecting the DN-F400 and RC-F400S. DN-F400 7 6 STOP/CUE PLAY/PAUSE RC-F400S 3 ON OFF 2 1 3 1,2 4,5 POWER 1 1 PGM RPT 00:45 \ MUSIC \ Honey.MP3 1.
3. DEVICE OPERATION • When the button is held pressed for more than 1 second, playback is in FF or FR of 2 times speed. (with audio output) • When the button is held pressed for more than 4 seconds, playback is in FF or FR of 10 times speed. (with audio output) • When the button is held pressed for more than 7 seconds, playback is in FF or FR of 100 times speed. (without audio output) • When the button is held pressed for more than 10 seconds, playback is in FF or FR of 200 times speed.
3. DEVICE OPERATION ■ File-list mode 1.Normal playback Advanced playback using the RC-F400S ■ Main mode When the RC-F400S is turned on, the main mode is displayed on the display unit. If a file with the extension “m3u”(playlist file) is not found under the root in SD card, playback is in normal playback mode. \ MUSIC \ abcdefg.
3. DEVICE OPERATION 1. Select a folder with the 4/¢ jog wheel, and press it. Then the files in the folder are displayed. ■ NOT PLAY setting Set the files not to be played. 2. Press the 4/¢ jog wheel to determine the file selection then press the 6 button to start playback. FILE LIST \ MPGLANG \ 0123456789012345678901234567 001 abcdefg.MP3 002 abcdefg(Remix).MP3 003 Honey01.MP3 004 abcdefg00.MP3 005 abcdefg01.MP3 006 abcdefg02.MP3 007 abcdefg03.MP3 --- abcdefg04.MP3 009 abcdefg05.MP3 2.
3. DEVICE OPERATION ■ Hot-start setting ■ Hot-start list mode FILE LIST \ MPGLANG \ 0123456789012345678901234567 001 abcdefg.MP3 002 abcdefg.MP3 003 Honey01.MP3 Plaese select 004 abcdefg00.MP3 HOTSTART button. 005 abcdefg01.MP3 006 abcdefg02.MP3 007 abcdefg03.MP3 --- abcdefg04.MP3 009 abcdefg05.MP3 EXIT When playback starts by pressing the hot start button, the hot start button is lit during playback. q w LOAD NOT PLAY e 1. Select a file to be set in file-list mode with the 4/¢ jog wheel. 2.
4. CONTROL FEATURES RS232C CONTROL Connect the RS-232C straight cable to the RS-232C serial port (D-sub 9-pin). Then the unit can be controlled from external host equipment. • The DN-F400 automatically transmits status data when status is changed. • The DN-F400 will respond to status requests by transmitting the associated status data RS232C specifications.
4.CONTROL FEATURES Table of Control command codes Code Command @0TRnnn+CR Track Jump nnn @02311+CR DISPLAY @02332+CR Track Jump ¢ @02333+CR Track Jump 4 @02348+CR PAUSE @02350+CR RWD : ON @0235001+CR RWD : OFF @02352+CR FF : ON @0235201+CR FF : OFF @02353+CR PLAY @02354+CR STOP @0HPnn+CR HOT START PLAY : Hot Start No nn @0FAENnnn+CR File Attribute : Enable Track No. nnn @0FADEnnn+CR File Attribute : Disable(Not Play) Track No. nnn @0HSＮＮnnn+CR HotStart Set NN : Hot Start No.
4.CONTROL FEATURES Table of Status Request and Status information codes When a Status Request Command from the host is received by the DN-F400, the DN-F400 sends the Status Information to the host. When the DN-F400 changes status, the DN-F400 automatically sends Status Information to the host.
4.CONTROL FEATURES Mode Play attribute (Enable /Disabel(Not Play)) Request Code @0?FAnnn+CR Program Play/Nomal Play @0?PG+CR PlayMode @0?PM+CR Finish Mode @0?FM+CR Repeat Mode @0?RE+CR Version Record Time HOT START Play No nnn: Track No Status Enable Disable (Not Play) Program Play/Nomal Nomal Play Play Program Play PlayMode Nomal Single Play RANDOM Finish Mode Next Recue Repeat Mode On OFF Version xxxxxxxx Record Time YYYY MM DD hh mm ss HOT START Play No.
4.CONTROL FEATURES PARALLEL CONTROL Remote control circuit Note: • The tally output pin has open collector IC specifications (Imax. 10mA, Vmax. 5.5V). • The tally input pin has LVTTL IC specifications (Vcc 3.3V). • Maximum current for Tally power supply (Pin 25) is 100mA.
5. TROUBLESHOOTING Make sure of the followings before you consider as any malfunctions : 1. Are all the connections correct? 2. Are all system components being operated correctly in accordance with the operating instructions? 3. Are the speakers and amplifier/receiver functioning correctly? If the Unit still does not function properly, check the symptom against the list below. If the symptom is not covered on the check list, contact your dealer or service centers. Service centers are listed at http://www.
6. SPECIFICATIONS ■ DIMENSIONS ■ SYSTEM SD/SDHC WAV, MP3 (MPEG-1 Layer III ) FAT16/FAT32 32-320 kbps 44.1/48 kHz 16 bit 6.00ｍｍ 0.24inch Playback Media : Playback File Format : Media Format : MP3 Bit Rate : Sampling Frequency : Quantization : 270.00ｍｍ 10.63inch ■ AUDIO SECTION 44.00ｍｍ 9.50ｍｍ 1.73inch 0.37inch Audio channel : 2 (Stereo) / 1 Monaural Frequency response : 20 to 20,000 Hz ± 1.
D&M Holdings Inc.
