User Guide

8
8DN-D4000
Adjustment Item
Adjustment Value indication at
character portions.
Focus Gain 0408 ~ 3248
Focus Balance -050 ~ +050
Focus Offset -005 ~ +005
Tracking Gain 0392 ~1569
Tracking Balance -025 ~ +025
Tracking Offset -005 ~ +005
* Reference data.
3. TEST MODE
Process No.
(TRACK
Indication)
Function
(Character-display)
Contents
A1 button
Heat Run
(H/R1Normal)
Starting with the PLAY/PAUSE button, it repeats open/close of the tray and
playback.
All tracks are played back if the track count is less than 20. Only the first and last
tracks are played back if the tracks are more than 21. When any errors, it stops
and indicates error code (see Error Code Table).
A2 button
-
-
Chucking Test
(H/R2_Tray)
Starting with the PLAY/PAUSE button, it repeats open/close of the tray, servo on,
and TOC read.
The display shows the number of the tray operation. When any errors, it stops and
indicates error code (see Error Code Table).
Function
(Character-display)
Contents
Loading a disc by OPEN/CLOSE button.
Press the PLAY/PAUSE button. B.E.R. is displayed.
You can select the track by the JOG DIAL.
“E.Rate_XXX XXX : Block Error Rate
Block Error Rate Check
Servo Check
Starts automatic servo checking when the SELECT knob is pushed.
Loading a disc by OPEN/CLOSE button.
“Lchk_Open” : Disc Tray is opened.
“Lchk_Wait” : During check.
“Lchk_OK!!” : Disc Tray is opened.
“LchkErr *** ” : Error(E ***) is occurred.
Illumination Check
All illuminations are lit.
All illuminations can be turned off to push the SELECT knob.
Press the SELECT knob again, all illuminations can be lit.
SELECT knob