DN-C680 Serial Port Specifications 1. Port settings = RS232C/422A 2. Baud rate = 9600 or 19,200 (CD player and computer must match) (Adjustable within the preset mode) 3. Data bits = 8 4. Parity = Even 5. Stop bits = 1 Page 1 *Page 2~14 does not exist DENON, LTD.
SOFTWARE SPECIFICATIONS 1. Command List (ASCII Code is used to the commands) Code Command Parameter Scan (1) A Discription 1 byte, SCAN mode *(1) b7 X X X X X X X X 0 1 b6 0 0 0 0 0 0 0 0 X X b5 0 0 0 0 0 0 0 1 X X b4 0 0 0 0 0 1 1 0 X X b3 0 0 0 0 1 0 1 0 X X b2 0 0 0 1 0 0 0 0 X X b1 0 0 1 0 0 0 0 0 X X Performs the manual search (scan) with the selected direction and speed.
Code Command Parameter Mode Set (1) M Discription 1 byte, Frames mode *(1) Performs the playback or the record set mode. b7 X X b6 0 0 b5 0 0 b4 0 0 b3 0 0 b2 0 0 b1 0 1 b0 1 0 X X X 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 0 0 1 0 1 X X X X X X X X X 0 1 0 0 0 0 0 0 0 0 0 X X 0 0 0 0 0 0 0 0 0 X X 0 0 1 1 1 1 1 1 1 X X 1 1 0 0 1 1 1 1 1 X X 0 1 1 1 0 0 0 0 1 X X 1 1 0 1 0 0 1 1 0 X X 0 0 1 0 0 1 0 1 0 X X Option 12 bytes, Option No.
Code Command Parameter Discription (4) New Format System Information 1 Code b7 X X X X X X X 1 b6 X X X X X X 1 X b5 X X X X X 1 X X b4 X X X X 1 X X X b3 X X X 1 X X X X b2 X X 1 X X X X X b1 X 1 X X X X X X b0 1 X X X X X X X : : : : : : : : FL Tube “REPEAT” lights (0 : Blink/Unlight) LED “PITCH” lights (0 : Blink/Unlight) FL Tube “EOM” lights (0 : Blink/Unlight) FL Tube “PROGRAM” lights (0 : Blink/Unlight) FL Tube “EJECT LOCK” lights (0 : Blink/Unlight) FL Tube “PLAY LOCK” lights (0 : Blink/
Code Command Parameter Discription (9) New Format System Information 6 Code b7 X X X X X X X b6 X X X X X X 1 b5 X X X X X 1 X b4 X X X X 1 X X b3 X X X 1 X X X b2 X X 1 X X X X b1 X 1 X X X X X b0 1 X X X X X X : : : : : : : FL Tube “TOC” blinks (0 : Light/Unlight) FL Tube “EDIT” blinks (0 : Light/Unlight) FL Tube “CUE” blinks (0 : Light/Unlight) FL Tube “DISC NAME” blinks (0 : Light/Unlight) FL Tube “TRACK NAME” blinks (0 : Light/Unlight) FL Tube “DATE” blinks (0 : Light/Unlight) FL Tube “DIG
Code Command Parameter Discription W Pause Non X Send Old Status Non Requests the system status (1 byte Answer). Y Standby Non Performs the standby operation in stop and manual search (scan) mode. Send Set Track 2 bytes, Track No *(1) Requests the track number (program/hot track). Z g h (1) b7 0 b6 0 b5 0 b4 0 Pauses the playback. b3 0 b2 0 b1 0 b0 1 : Program Set POS code Non Requests POS code. ISRC code 1 byte, Track Number (Binary) 1 byte, *(1) Requests ISRC code.
To control the player while attaching the ID (Player Number); 1) Set the Mode at first. [M]-[10001000] After the above, the player accepts commands with ID. 2) Attach and transfer the ID (1 byte) subsequent to the control command. Example: With ID [COMMAND]-[ID]-[DATA] Without ID [COMMAND]-[DATA] 3) When the ID is [11111111], all players accept the command. 2.
