User Guide

Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 38 page of 39
2.6.25 Repeat command
This command changes repeating function.
1) Command format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘R’)
2 Repeat Code(OFF : ‘0’, ON : ‘1’)
3 Reserve ( 0x00 )
4 Reserve ( 0x00 )
5 Reserve ( 0x00 )
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 88. Repeat command
2) Answer format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘R’)
2 Answer code (Table 3)
3 ETX( 0x03 )
4 BCCH( high-level )
5 BCCL( low-level )
Table 89. Repeat answer
3) Special condition