User Guide

Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 36 page of 39
2.6.23 Time command
This command changes Elapse/Remain/Total Remain time display.
1) Command format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘P’)
2 Time Mode Code(Elapsed : ‘0’, Remain : ‘1’, Total Remain : ‘2’)
3 Reserve ( 0x00 )
4 Reserve ( 0x00 )
5 Reserve ( 0x00 )
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 83. Time command
2) Answer format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘P’)
2 Answer code (Table 3)
3 ETX( 0x03 )
4 BCCH( high-level )
5 BCCL( low-level )
Table 84. Time answer
3) Special condition