User Guide

Revision1.0 DN-C635 Serial Interface Specification
Date 2003-01-28 35 page of 39
2.6.22 Pitch Set command
This command sets up the numerical value of pitch function.
1) Command format
byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Command code (‘O’)
2 Pitch symbol (‘+’,’-‘)
3 Pitch 10 digits
4 Pitch 1 digits
5 Pitch 0.1 digits
6 ETX( 0x03 )
7 BCCH( high-level )
8 BCCL( low-level )
Table 81. Pitch command
2) Answer format
Byte/bit 7 6 5 4 3 2 1 0
0 STX( 0x02 )
1 Reply code (‘O’)
2 Answer code (table 3)
3 ETX( 0x03 )
4 BCCH( high-level )
5 BCCL( low-level )
Table 82. Pitch answer
3) Special condition