Operation Manual

APPENDIX
Category Command
Command code
Parameter 1 Parameter 2 Remarks
Category code
Command
number
Device status
ANS POW STAT* 11 60 Number -
“GET POW STAT 1byte reply 0:POWER ON 1:POWER NEUTRAL
2:POWER STANDBY”
ANS WIN STAT 11 61 Number - See FRS Main State.
ANS DIM STAT* 11 62 Number - Dimmer Value 1byte reply
ANS LOK STAT* 11 63 Number - Lock No. 1byte specification
ANS PITCH STAT* 11 64 Number - Pitch switch Value 1byte reply ON:1/OFF:0
ANS PITCH VAL* 11 65 Number -
“Pitch Value 5bytes specification Byte1 symbol =0:positive/1:negative
Byte2 Pitch hundred value (0 - 9) Byte3 Pitch ten value (0 - 9) Byte4 Pitch
single value (0 - 9) Byte5 Pitch first decimal value (0 - 9)”
ANS KEY STAT 11 66 Number - Key Sw Value 1byte ON:1/OFF:0 reply
ANS PRS XXXX 11 67 Number - Preset Value 4bytes reply
ANS UBL VOL 11 68 Number -
“Volume Value 4bytes reply Byte1 symbol =0:positive/1:negative Byte2
Volume(db) ten value (0 - 9) Byte3 Volume(db) single value (0 - 9) Byte4
Volume(db) first decimal value (0 - 9) Byte5 Volume(db) first decimal value
(0 - 9)”
ANS FW VER 11 69 Number - Version No. reply
ANS DRV VER 11 70 Number - Optical Drive Version No. reply
ANS DEV ID 11 71 Number - Device ID=MAC Addr 12bytes
ANS PID 11 72 Number - “GeneCode 4bytes ModelCode 4bytes ModelSubCode 4bytes”
ANS PPWD 11 73 Name String - Password string reply
ANS ERROR* 11 74 Number - Error Code
ANS AVAILABLE PSTAT 11 75 Number -
“Transferable power status indicated in 2 bytes Bit Pattern bit0: Power
OFF bit1: Power ON bit2: Power Neutral bit3: Network Standby bit4:
Standby”
ANS CUR MEDIA 11 78 String -
“Return current media. Within 16 characters. E.g.) CD USB1 USB2 iPod/
iPhone NET SD1 SD2 SD(Front) SD(Rear)”
ANS ALV XXXX 11 79 Number - SYSCFG Setting value
Appendix