Operation Manual

18
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Setting Defaults
n System Setting
Item Setting Details (Items in bold are factory default)
Mono Off: Channel output based on the input source.
On: Forced monaural output.
Output Rate Auto: Audio output based on the rate of the input media or file.
44.1k:Audiooutputat44.1kHz.
48k:Audiooutputat48kHz.
Auto Sleep
Sleep is stopping the
CD reading.
Off: Does not function.
30 sec: Switches to sleep mode if there are no operations for 30 seconds.
10 min: Switches to sleep mode if there are no operations for 10 minutes.
20 min: Switches to sleep mode if there are no operations for 20 minutes.
30 min: Switches to sleep mode if there are no operations for 30 minutes.
Volume Output Fixed (0 dB): Output audio control is fixed at 0 dB.
Variable: Output audio control is variable.
Ref (XLR/RCA) +24 dBu/+10 dBV: XLR=+24 dBu / RCA=+10 dBV
+20 dBu/+6 dBV: XLR=+20 dBu / RCA=+6 dBV
+18 dBu/+4 dBV: XLR=+18 dBu / RCA=+4 dBV
+6 dBV/+6 dBV: XLR=+6 dBV / RCA=+6 dBV
Trim L
+2.0 dB - –2.0 dB: Adjusts the left channel in 0.1 dB steps. Initial value is “0 dB”.
Trim R +2.0 dB - –2.0 dB: Adjusts the right channel in 0.1 dB steps. Initial value is “0 dB”.
Display Contrast 1 to 10: 1 is the darkest, 10 is the brightest. Initial value is “5”.
IR Remote On: Receives IR remote commands.
Off: Does not receive IR remote commands.
Serial Bit Rate 9600: 9600 bps
38400: 38400 bps
Serial Protocol MIDI: Conforms to MIDI controls.
RC: Conforms to D&M RC protocol.
Machine Name
z
DN-700C: Displays the UPnP device name. (Maximum 12 characters)
IP Address
z
Auto: DHCP is assigned automatically.
Static: Specify a fixed IP address. When selected, the fixed address is displayed.
Subnet Mask
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
Gateway
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
DNS Server
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
Network Standby Off: Only Front Sub u-Con operates (low power operation).
On: The display section and LEDs of the DN-700C are off, but power is supplied.
Password ****: Sets a password (6 to 12 characters) for system settings and using the
web. Displayed as “****” when set.
Default value is “NULL”.
Default Resets all of the system settings to the defaults.
z Restart the DN-700C after changing this setting.