Operation Manual

17
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Setting Defaults
Item Setting Details (Items in bold are factory default)
Auto Fade Out
Sets fade out.
Off: Does not function.
0.5 sec: Sets the volume to gradually decrease every 0.5 seconds.
1.0 sec: Sets the volume to gradually decrease every 1 seconds.
3.0 sec: Sets the volume to gradually decrease every 3 seconds.
Start Delay
Sets the playback start
timing.
Off: Does not function. (Playback starts immediately).
100 ms: Playback starts after a 0.1 second gap.
200 ms: Playback starts after a 0.2 second gap.
300 ms: Playback starts after a 0.3 second gap.
End Of Message
Sets how the EOM
display lights in the
display.
Off: Does not function.
0 sec: The playback time flashes and the EOM display lights for 0.5 seconds
after the track finishes.
5 sec:The playback time flashes and EOM display lights from 5 seconds before
the track finishes.
10 sec:The playback time flashes and EOM display lights from 10 seconds
before the track finishes.
15 sec:The playback time flashes and EOM display lights from 15 seconds
before the track finishes.
20 sec:The playback time flashes and EOM display lights from 20 seconds
before the track finishes.
30 sec:The playback time flashes and EOM display lights from 30 seconds
before the track finishes.
60 sec:The playback time flashes and EOM display lights from 60 seconds
before the track finishes.
Next Trk Reserve Off: Plays back the selected track immediately after the current track finishes.
On: When a track is selected, the selected track number is reserved until
playback of the track stops.
Master Key Off: Disables the master key for the pitch control function.
On: Enables the master key for the pitch control function.
Dimmer
Enables/disables the
“Display Dimmer”
and “LED Dimmer”
settings.
Off/On
Display Dimmer
Sets the brightness of
the display.
100 %: Normal brightness.
75 %: 75 % of the normal brightness.
50 %: 50 % of the normal brightness.
25 %: 25 % of the normal brightness.
0 %: Off in the standby status, and 25 % of the normal brightness during
operation.
LED Dimmer
Sets the LED
brightness.
100 %: Normal brightness.
75 %: 75 % of the normal brightness.
50 %: 50 % of the normal brightness.
25 %: 25 % of the normal brightness.
Screen Saver
Sets the screen saver
operation.
Off: Does not function.
On: The screen saver starts when there are no operations for 30 minutes.
Item Setting Details (Items in bold are factory default)
Remain Time Mode
Sets the remaining
time display.
Track: Displays the remaining time for each track.
Total: Displays the remaining time for all playback target tracks (CDDA only).
Fader Start
Sets the operations
when parallel remote
is used.
Play: Plays back while the FADER START pin of the parallel remote is closed.
Play-Pause: Plays back while the FADER START pin is closed, and pauses
when this pin is opened.
Play-Next: Plays back while the FADER START pin is closed, and jumps to the
next track when this pin is opened.
Play&Lock: Plays back while the FADER START pin is closed, and locks the
keys of the unit.
Play&Lock-Pause: Plays back when the FADER START pin closes, and locks
the keys of the unit. Playback pauses when this pin opens.
Play&Lock-Next: Plays back when the FADER START pin closes, and locks the
keys of the unit. Playback jumps to the next track when this pin opens.
Para Rem Mode Hot Start: Sets the Hot Start mode.
Hot Cue: Sets the Hot Cue mode (Playback is not performed by Hot Start).
Default Resets all of the preset settings to the defaults.