HOME THEATER SYSTEM Æ a Æ x º v∞|√ ¥≤ Œ DHT-1000DV OPERATING INSTRUCTIONS æ fi ß @ ª°© ˙ Æ — CH 1 ON POWER 2 3 VCR CH 4 OFF VCR POWER 5 CH TV POWER CH 9 TV/VCR SLEEP DISPLAY TV 0 +10 CALL 6 VOL 8 7 CLEAR RETURN INPUT MODE SURROUND MENU FUNCTION ENTER MODE VOLUME BAND MUTE CH SHIFT NTSC/PAL STATUS TU MEMO SUB TITLE DVD SURROUND AMPLIFIER UADV-1000 FUNCTION / SELECT ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA MASTER VOLUME CH.
ENGLISH 2 2 We greatly appreciate your purchase of this unit. To be sure you take maximum advantage of all the features this unit has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise.
ENGLISH 2 INTRODUCTION 1 BEFORE USING Thank you for choosing the DENON DHT-1000DV Home Theater System. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding.
ENGLISH Speaker units When installing the speakers, take careful considerations for safety when selecting the place and method of installation. When using stands or brackets, follow their instructions and check for safety before using and installing. To install on ceilings or walls, to ensure safety have a specialist do the installation work. Note that DENON will accept no responsibility for injuries or accidents resulting from the speakers falling, etc., due to improper installation or mounting.
ENGLISH 5 DISCS 6 CAUTIONS ON HANDLING DISCS • The types of discs listed on the table below can be used on the ADV-1000. The marks are indicated on the disc labels or jackets.
ENGLISH 7 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Note that binding pin plug cords together with AC cords or placing them near a power transformer will result in generating hum or other noise.
ENGLISH (2) Connecting the audio components (3) Connecting video components • To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in video quality. • When making connections, also refer to the operating instructions of the other components. • When making connections, also refer to the operating instructions of the other components.
ENGLISH (4) Connecting a video component equipped with S-Video jacks (5) Connecting the antenna terminals • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
ENGLISH (6) Connecting to a TV or Monitor Equipped with Component Input Connectors (7) Sound output from this unit digital audio output connectors • When making connections, also refer to the operating instructions of the other components. • The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. 2 When a disc is played on the ADV-1000 Audio recording format MON.OUT IN TV/DBS IN V.AUX IN OUT MON.
ENGLISH 8 PART NAMES AND FUNCTIONS Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). • Some of the buttons on the remote control unit have two functions. The functions are switched using the remote control mode selector buttons (CDR/MD/TAPE, TUNER/TV/VCR and DVD). After one of these buttons is pressed, the function will not switch until another remote control mode selector button is pressed.
ENGLISH 9 REMOTE CONTROL UNIT (3) Preset memory • The included remote control unit (RC-902) can be used to operate not only this unit but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products.
VCR POWER ENGLISH TV POWER [3] VCR • Other makes of components can be operated by setting the preset memory for your make of video component. This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the components as shown on the List of Preset Codes (attached sheet). Operation is not possible for some models.
ENGLISH 2 Speaker system layout (basic system layout) • The following shows a basic example of layout for a system consisting of six speaker systems and a TV. 10 SETTING UP THE SYSTEM (1) System setup items POWER • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 9), make the various settings described below on the monitor screen using the ADV-1000’s on-screen display function.
ENGLISH (2) Before setting up the system (3) Quick system settings (to switch between the 2- and 5.1-channel modes) • This section describes surround-related setup operations. For DVD-related setup operations, see page 40. • The setup operations cannot be performed while discs are playing. Set the stop mode first. 1 2 2 • The ADV-1000 is preset with Quick System settings for a 5.1-channel surround system using five small speakers.
ENGLISH (4) System setting changes • The quick system settings and factory default settings are changed at the system setting change menu. • The settings are stored in the memory until they are next changed, even when the power is turned off. [1] Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.
ENGLISH [2] Setting the speaker distance • Input the distances from the listening position to the speakers and set the surround delay time. • The default settings below are set upon shipment from the factory. Preparations: Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right). [3] Setting the channel level • Use this setting to adjust so that the playback level between the different channels is equal.
ENGLISH NOTES: • When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect ALL surround modes. Consider this mode a Master Channel Level adjustment mode. • After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes.
ENGLISH (3) Playback 6 IMPORTANT SETUP INFORMATION This set has the following presettings: “DISC SETUP”, “OSD SETUP”, “VIDEO SETUP”, “AUDIO SETUP”, “RATINGS”, and “OTHER SETUP”. These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes, refer to pages 40 to 45. Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons. (3)-5 , , and ) to select the desired item.
ENGLISH POWER VCR POWER TV POWER DISPLAY Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH POWER VCR POWER TV POWER Input mode display 4 5 Start playback on the selected component. • For operating instructions, refer to the component’s manual. Either turn the MASTER VOLUME dial on the main unit or use the VOLUME buttons on the remote control unit to adjust the volume. After starting playback Lit [1] Adjusting the sound quality (SDB / TONE) The SDB/TONE function will not work in the direct mode.
ENGLISH 13 DOLBY / DTS SURROUND Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to “5.
ENGLISH 14 SURROUND PLAYBACK DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems. DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well as the stereo 2-channel mode.
ENGLISH [1] 2-channel mode settings • In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set with the 2-channel mode setting (Auto Stereo, Dolby Pro-Logic II Cinema, Dolby Pro-Logic II Music and Dolby Pro-Logic).
ENGLISH [2] Setting the parameters in the PLII CINEMA, PLII MUSIC and PRO LOGIC modes • When PLII CINEMA, PLII MUSIC or PRO LOGIC is selected in the 2-channel mode, more detailed parameters can also be set for the different modes. PLII MUSIC mode: Use the procedure described below to make the settings. PLII CINEMA and PRO LOGIC modes: Refer to step 6 on pages 24 and 25. • Program sources marked in parentheses and 2-channel sources (CDs, etc.
ENGLISH 6 Surround parameters (2) • LFE level setting LFE -10 ... 0dB -5 , ... 0 / D.COMP. (Dynamic Range Compression): • This parameter adjusts the dynamic range of the Dolby Digital sound. When listening with the volume turned relatively low, at night for example, set this to the “HI” side to lower the peak of the sound and amplify the quieter sounds, narrowing the dynamic range and making the sound easier to listen to. Set to “OFF” to turn this function off.
ENGLISH [3] Playing in the auto stereo mode ........................................................................ (DVD, TV/DBS and V.AUX function only) • For the DVD, TV/DBS and V.AUX functions, when the 2-channel mode is set to the auto stereo mode, 2-channel sources are played in 2-channel stereo. • Applicable sources • Digital inputs (TV/DBS and V.
ENGLISH (2) DSP Surround simulation 5 3 1, 2 4 2 1 POWER 2 3 VCR CH 4 OFF VCR POWER 5 6 CH VOL 8 9 TV/VCR SLEEP 7 CLEAR TV POWER CH DISPLAY RETURN INPUT MODE SURROUND MENU Y/N NO Y/N , / Remote control unit MATRIX VIRTUAL ROOM SIZE DELAY EFFECT EFFECT DEFAULT DEFAULT 2 1 FUNCTION DEFAULT YES TV 0 +10 CALL SURR.PARA Surround parameters (3) When “YES” is selected, the settings are reset to their factory default values.
ENGLISH 2 Surround modes and parameters 16 LISTENING TO THE RADIO Signals and adjustability in the different modes (1) Auto tuner presets Input function playing signals and Surround mode TV/DBS V.AUX VCR CDR/TAPE TUNER When playing PCM signals When playing Analog signals When playing Analog signals TV/DBS V.
ENGLISH POWER POWER VCR POWER (2) Tuning (3) Presetting FM and AM stations VCR POWER TV POWER TV POWER MENU FUNCTION Example: Presetting FM station (currently tuned in) at preset number P03 1 MENU FUNCTION 2 ENTER ENTER 2 3 2 2 1 MODE VOLUME BAND MODE VOLUME MUTE 3 SUB TITLE CH SHIFT NTSC/PAL STATUS TU MEMO AUDIO ANGLE BAND 2 MUTE CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B TUNER/TV/VCR 3 Adjust the receiving frequency.
ENGLISH 18 USING THE ON-SCREEN 17 ON-SCREEN DISPLAY • The ADV-1000 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and the disc on the screen when the function is set to DVD. q Setup screen • This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-1000 and various settings when playing discs (system setting change and DVD setting change).
ENGLISH (2) Adjusting the picture quality 4 POWER 2 The quality of the picture when playing discs can be adjusted. VCR POWER TV POWER CALL 1 DISPLAY CH SLEEP TV/VCR +10 Use the and cursor buttons to adjust, then press the ENTER button. • The item selected at step 3 is displayed and can be adjusted. • The adjusted settings are all stored in the memory. \ ENTER 0 RETURN INPUT MODE SURROUND MENU Quit the picture quality adjustment mode Press the DISPLAY button.
ENGLISH POWER VCR POWER TV POWER [2] Playing a Certain Section Repeatedly (A-B Repeat Playback) (3) Playing Repeatedly 1 2 Use this function to play your favourite audio or video sections repeatedly. During playback, press the A-B REPEAT button. • This sets start point A. REPEAT A-B A TO B SET A MODE VOLUME BAND Remote control unit MUTE CH SHIFT NTSC/PAL STATUS TU MEMO SUB TITLE AUDIO PROG/DIRECT REPEAT A-B [2] -1,2 CH.SELECT SETUP T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.
ENGLISH (4) Playing Tracks in the Desired Order (5) Playing Tracks in the Random Order POWER 2 Use this function with video and music CDs to play the tracks in the desired order. 2 This function does not affect with DVD. 1 ON POWER 3 5 DISPLAY 9 SLEEP VOL 8 9 TV/VCR SLEEP 7 CH Before operating the remote control unit! • Be sure to set the DVD mode using the remote control mode selector buttons.
ENGLISH (6) MP3 Playback 2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the ADV-1000. If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
ENGLISH [2] Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. (7) Using the Multiple Audio, Subtitle and Angle Functions POWER VCR POWER [1] Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback.
ENGLISH [3] Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. (8) Using the Menus [1] Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu.
ENGLISH [2] Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
ENGLISH (2) Everyday timer Description of timer • The timer can be used to switch the power between the ON and STANDBY (OFF) modes once every day at the same time. (Everyday timer) • The timer can be used to play DVDs, CDs or TUNER. (3) Setting the Everyday timer Changing the timer settings • Reset the timer using the new settings. • The previous settings are cleared when they are replaced with the new settings.
ENGLISH (4) Setting the sleep timer (remote control unit only) NOTES: • If the current time is not set, the timer standby setting cannot be set to “ON”. Be sure to set the current time before turning on the timer. • The timer will operate as long as it is turned on, even if the time setting is off due to a power failure. If you want the timer to operate correctly, be sure the current time is properly set.
ENGLISH POWER POWER VCR POWER TV POWER 20 CHANGING THE DEFAULT SETTINGS (DVD) MENU 2 The initial setting that was set prior to shipping from the factory can be changed. The setting contents are maintained until they are next changed even when the power is switched off. VCR POWER (1) “DISC SETUP” is selected TV POWER FUNCTION 1,2 MENU ENTER 1,2 MODE VOLUME BAND MUTE CH SHIFT NTSC/PAL STATUS MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.
ENGLISH POWER VCR POWER 4 (2) “OSD SETUP” is selected ✽ To exit the dialog mode Press the ENTER button, you can go back to the previous screen. TV POWER MENU FUNCTION 2,3,4 2 When “SUBTITLE” is selected: • ENGLISH (Factory default) Select this when you want to play the DVD with the subtitles in English. • FRENCH Select this when you want to play the DVD with the subtitles in French. • SPANISH Select this when you want to play the DVD with the subtitles in Spanish.
ENGLISH POWER VCR POWER (3) “VIDEO SETUP” is selected 4 TV POWER MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 1 2 3 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE To exit the TV type mode Press the ENTER button, you can go back to the previous screen. Read page 40.
ENGLISH POWER VCR POWER (4) “AUDIO SETUP” is selected “LPCM SELECT (96 kHz / 48 kHz)” is selected. • OFF (Factory default) Make the selection when playing back to a decoder DVDs that were recorded with this unit using linear PCM 48 kHz/20/24 bit and 96 kHz modes. Note that DVDs with Copyright Protection are converted to 48 kHz/16 bits and played back. The same signal is output from the digital output jacks.
TV POWER ENGLISH (5) “RATINGS” is selected 4 VOLUME CH ON POWER OFF VCR POWER CLEAR TV POWER CALL DISPLAY BAND 1 2 3 5 6 VCR CH 4 CH 9 SLEEP 4 SHIFT NTSC/PAL STATUS MEMO TU TV SUB TITLE AUDIO ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA 0 PROG/DIRECT REPEAT A-B RETURN INPUT MODE SURROUND MENU Be sure to set the DVD mode using the remote control mode selector buttons. The set's password is set to “0000" by default. Do not forget the password.
ENGLISH POWER 21 LAST FUNCTION MEMORY (6) “OTHER SETUP” is selected VCR POWER TV TV POWER CH DISPLAY SLEEP TV/VCR 0 +10 CALL RETURN INPUT MODE SURROUND MENU FUNCTION 2,3,4 ENTER 2,3,4 MODE VOLUME BAND MUTE SHIFT NTSC/PAL STATUS CH MEMO TU SUB TITLE AUDIO PROG/DIRECT REPEAT A-B CH.SELECT SETUP 1 T.TONE ANGLE TOP MENU REPEAT RANDOM SDB/TONE SURR.PARA CDR/MD/TAPE TUNER/TV/VCR NOTES: • An English caption decoder is required to display English captions.
ENGLISH 23 TROUBLESHOOTING Symptom Check again before assuming the player is malfunctioning 2 Are all the connections correct ? you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
ENGLISH 24 SPECIFICATIONS (2) Speaker units 2 (1) DVD Surround Receiver Unit 2 Audio section • Power amplifier Output power: Output terminals: • Analog Input sensitivity / input impedance: Frequency response: S/N: Rated output: • Digital Digital input / output: 2 Video section • Standard video jacks Input / output level and impedance: • S-video jacks Input / output level and impedance: 2 2 2 2 2 Front: 55 W + 55 W Center: 55 W Surround: 55 W + 55 W Subwoofer: 55 W Front, Center, Subwoofer, Surrou
16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321 Printed in China 511 3974 002 210
