Specifications
3. List Of Error Codes
x: Drive mechanism number y: DIR number z: 0 to 9
Error code
No 1st 2nd Error description
1
0x20 000
No disk in the CD drive
2
0x21 000
Unadjustable tracking offset
3
0x22 000
Unadjustable focus offset
4
0x23 000
Unadjustable rough focus gain
5
0x24 000
Disabled focusing (or failure of spindle retraction)
6
0x25 000
No tracking
7
0x26 000
Unadjustable rough tracking gain
8
0x27 000
Focusing failed in reproduction
9
0x28 000
Focusing failed in searching
10
0x29 000
Focusing failed in automatic adjustment
11
0x2A 000
Focusing failed in TOC reading
12
0x2C 000
Focusing failed in pausing
13
0x2D 000
Focusing failed in manual searching
14
0x2E 000
Cannot read a sub-code for 0.5 second.
15
0x2F 000
Cannot read a sub-code for 1 second.
16
0x30 000
Cannot read a sub-code in TOC reading.
17
0x32 000
Cannot read a sub-code in pausing.
18
0x33 000
Cannot read a sub-code in manual searching.
19
0x34 000
Cannot read within a preset time period in TOC reading.
20
0x35 000
Cannot turn on the INNER TRACK switch.
21
0040 000
Cannot detect the door switch in opening.
22
0041 000
Cannot detect the door switch in operation.
23
0y80 000
DIR unlock
24
0y81 000
FS (44.1 KHz) error
25
0x39 000
Cannot read CD TEXT within a preset time period. (Timeout)
26
4825 zzz
Address sensor lower bit error
27
4826 zzz
Address sensor higher bit error
28
4827 zzz
Address matching sensor lower bit error
29
4828 zzz
Address matching sensor higher bit error
30
4829 zzz
Selector sensor (LIMS0) error
31
4830 zzz
Selector sensor (LIMS1) error
32
4831 zzz
Lifter/loader sensor (LIMS0) error
33
4832 zzz
Lifter/loader sensor (LIMS1) error
34
4833 zzz
Loader-down reconfirmation sensor (LIMS2) error
35
4834 zzz
Disk chuck (LIMS0) error
36
4835 zzz
Disk chuck (LIMS1) error
37
4836 zzz
Front limit sensor error
38
4837 zzz
Rear limit sensor error
39
4838 zzz
Rear clamper sensor error
40
4839 zzz
Front clamper sensor error
41
4840 zzz
Drive position sensor (1) error
42
4841 zzz
Drive position sensor (2) error
43
4842 zzz
Disk rack error
44
3000 zzz
Cannot take out a disk although "Disk Present" is indicated by the disk sensor.
45
1000 000
Communication error after a slave unit connection is recognized
(1) Error codes 0*2*000 to 0*34000 and 0*39000
The disc may be inserted in reverse in the CD rack (with the label side reversed) or the disk may have
contaminants or scratches on its surface.
(2) Error codes 4827*** and 4828***
The CD rack may be inserted incompletely.