Specifications

.21 Request Error status

This command acquires the Error status. When an error occurs, all units become the STOP mode.

bytebit 7 6 5 4 3 2 1 0

0 STX 02h

1 Command code 7

2 ETX 03h

3 BCCH high-level

4 BCCH low-level

Answers returned

bytebit 7 6 5 4 3 2 1 0

0 STX02h

Reply code ’7’

2 Answer code

Error-occurred player ID (‘0’ to ‘5’)

4 1st error code (1000 digits) (ASCII)

5 1st error code (100 digits) (ASCII)

6 1st error code (10 digits) (ASCII)

7 1st error code (1 digit) (ASCII)

8 2nd error code (100 digits) (ASCII)

9 2nd error code (10 digits) (ASCII)

10 2nd error code (1 digit) (ASCII)

11 ETX 03h

12 BCCH high-level

13 BCCH low-level

Special condition

· When no error occurs, bytes 3 to 10 becomes ‘0’.

Other

· For error codes, see item 3.

· After an error occurs, only the OPEN key on the DCM-5000/5001 is available. Do not open

and remove the CD rack by force. Follow the instructions in "Error Code List (3)."

· To restart the DCM-5000/5001 after removing the error cause, turn off power of all units, then

turn on power switches of the units in the preset power-on sequence.