Specifications

.19 Request CD-TEXT Name
This requests the various titles of a specified CD-TEXT disc.
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Command code 4
2
Disc number ( 100 digits )
3
Disc number ( 10 digits )
4
Disc number ( 1 digit )
5
Name category code 1 *1
6
Name category code2 *1
7
ETX 03h
8
BCCH high-level
9
BCCH low-level
*1 Name category code
Name category Name category code 1 Name category code 2
Disc
‘ D ’ ‘ I ’
Artist
‘ A ’ ‘ R ’
Track Track number
10 digits (
ASCII )
Track number
1 digits (
ASCII )
Answers returned
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Reply code 4
2
Answer code
3
Name character 1 (ASCII)
n2 Name character nASCII
n3 ETX 03h
n4 BCCH high-level
n5 BCCH low-level
Special condition
· The answer parameter for this command shall be of a variable length ( as per the data length of
the CD-TEXT ). However, the maximum value of the 'n' in the table ( maximum number of characters )
shall be 100. The number of track titles shall be max. 16.
· This command is valid only when the zone status is Load CD-TEXT Disc (J), or when the
previous zone status is proceeded to other status by the Request System Status command or other
commands see item 3 of “1.8 List of Status Codes”. However, a specified disc must be in the CD drive.
· For the order of the Request CD-TEXT Name and the Request TOC Data commands, it is recommended to
issue the Request TOC Data first.
·
Other