Specifications

.12 A-Time (Absolute Time) Search
This conducts an absolute time search on the disc in a selected zone.
If the unit receives this command while in the playback or pause mode, the unit completes the search, then keeps
running according to its immediately previous state. If the unit receives this command at the stop mode, it enters
the play mode from a track specified with A-Time. The unit becomes the pause mode at the end of a track specified
with A-Time.
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Command code W
2
Absolute time specification ( minutes10 digits )
3
Absolute time specification minutes1 digit
4
Absolute time specification seconds10 digits
5
Absolute time specification seconds1 digit
6
Absolute time specification frames10 digits
7
Absolute time specification frames1 digit
8
ETX 03h
9
BCCH high-level
10
BCCL low-level
Answers returned
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Reply code W
2
Answer code
3
ETX 03h
4
BCCH high-level
5
BCCL low-level
Special conditions
· The current track, next disc, and next track specified with the PLAY command are canceled. It
should send the command after this command to reserve the next disc or the track.
· This command is valid only when the zone status is Stop (B), Play (F) or PAUSE (G).
Other