Specifications

.11 Scan Play
This scans and plays the disc in a selected zone.
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Command code V
2
Skip code Forward Reverse
3
ETX 03h
4
BCCH high-level
5
BCCL low-level
Answers returned
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Reply code V
2
Answer code
3
ETX 03h
4
BCCH high-level
5
BCCL low-level
Special conditions
· SCAN PLAY can be canceled with the PLAY command by setting 2 to 11 bytes of the PLAY
command to ‘0’.
· This command is valid only when the zone status is Play (F) or PAUSE (G).
· When Read-in or Read-out is set by this command, the disc pauses at the top of the minimum
track (in the Read-in status) or pauses about two seconds before the read-out start time (in the Read-out
status).
· When the current and next disc numbers which were specified by the Play Command are the
same, the next disc and the next track that were specified by the Play Command are canceled with this
command.
Other