Specifications

.10 Track Skip
This selects a track for the disc in a selected zone.
If the unit receives this command while in the playback or in a pause, the unit completes the search, then keeps
running according to its immediately previous state.
The unit plays only 1 track. When a track is not specified with the Track Skip command, the unit goes to the head
track of the specified disc.
When Forward (+) or Reverse (–) is selected, the unit searches the track number one after or before the current
track number.
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Command code U
2
Skip code Forward Reverse Direct D
3
Track number ( 10 digits )
4
Track number ( 1 digits )
5
ETX 03h
6
BCCH high-level
7
BCCL low-level
Answers returned
bytebit 7 6 5 4 3 2 1 0
0
STX 02h
1
Reply code U
2
Answer code
3
ETX 03h
4
BCCH high-level
5
BCCL low-level
Special conditions
· Track number parameters ( Byte 3-4 ) are effectively only when the skip code is D .
· The current track, next disc, and next track specified with the PLAY command are canceled. It
should send the command after this command to reserve the next disc or the track.
· This command is valid only when the zone status is Play (F) or PAUSE (G).
· The unit can skip to a maximum disc with Forward (+) and to a minimum disc with Reverse (–
) and when it goes to more than those discs, the Order Disc None (4) answer code is issued.
Other