Protocol Specs

Revision1.40 DCM390 Serial Interface Specification
Date 24.May.’07 23 page of 40
D&M
2.6.8 REQUEST TEXT DATA command
This command requests the device to send text data.
1) Command format
Byte/bit 7 6 5 4 3 2 1 0
0 STX (0x02)
1 Command code (‘6’)
2 Data Type (Table 29)
3 Track number 100 digits (Table 30)
4 Track number 10 digits (Table 30)
5 Track number 1 digits (Table 30)
6 ETX (0x03)
7 BCCH (high-level)
8 BCCL (low-level)
Table 28. Request Text Data command
CODE
Data Type Note
0x30 (‘0’)
CD Text (Title)
0x31 (‘1’)
CD Text (Artist)
0x32 (‘2’)
Reserved
0x33 (‘3’)
Reserved
0x34 (‘4’)
MP3/WMA Folder Name
0x35 (‘5’)
MP3/WMA File Name
0x36 (‘6’)
Reserved
0x37 (‘7’)
ID3 Title Name Only Play/Pause/Cue.
0x38 (‘8’)
ID3 Artist Name Only Play/Pause/Cue.
0x39 (‘9’)
ID3 Album Name Only Play/Pause/Cue.
0x3A (‘:’)
Reserved
Table 29. Data Type
Track
number
Content Note
‘000’
Whole Disc’s If CD Text Disc Then whole Disc’s.
‘001’
Track 1
:
:
‘099’
Track 99 Maximum value in the case of the CD.
:
:
‘999’
Track 999
Table 30. Track number