SUPER AUDIO CD PLAYER DCD-CX3 Owner’s Manual Manuel de l’Utilisateur Manual del usuario 1.DCDCX3E3_ENG.
ENGLISH FRANCAIS ESPAÑOL n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ESPAÑOL FRANCAIS ENGLISH FCC INFORMATION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO 2.
ENGLISH Getting Started Contents Connections Operations Troubleshooting Getting Started Accessories······················································································1 Cautions on Handling······································································2 Cautions on Installation··································································2 About Discs······················································································2 Discs that can be Played···············
ENGLISH w Music CDs About Discs • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. • Moving the unit First eject the disc, turn off the power, then unplug the power cord from the power outlet. Next, disconnect the connection cables to other system units before moving the unit. • Note that the illustrations in these instructions may differ from the actual unit for explanation purposes.
ENGLISH Getting Started Holding Discs Cautions on Loading Discs Do not touch the signal surface. Connections • Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. • Do not use cracked or warped discs or discs that have been repaired with adhesive, etc. • Do not use discs on which the sticky part of cellophane tape or labels is exposed or on which there are traces of where labels have been removed. Such discs can get caught inside the player and damage it.
ENGLISH Inserting the Batteries Point the remote control unit at the remote sensor when operating it. w Set two R03/AAA batteries in the battery compartment in the indicated direction. Connections q Remove the remote control unit’s rear cover. Operating Range of the Remote Control Unit Getting Started About the Remote Control Unit Operations 30° NOTE 30° Approx.
ENGLISH Getting Started Part Names and Functions Rear Panel For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Q0 q Q1 t u i o Display off Connect using the connection cables shown below. Audio cables Audio signal: Analog connections b The brightness of the DRA-CX3’s display changes together with the brightness of the DCD-CX3’s display.
ENGLISH Getting Started Analog Connections Stereo receiver "6%*0 */ 3 Connections R - L Digital Connections Connecting the Power Cord • Connect either the “COAXIAL” or the “OPTICAL” digital output terminal. • There is a protective cap covering the optical digital output terminal. After removing the protective cap, insert the plug firmly until it locks. AC outlet (wall) (AC 120 V, 60 Hz) CD recorder, MD recorder, etc.
ENGLISH Setting the Layer to be Played with Priority Operations • The layer that is played with priority when the disc is loaded can be set. • Upon purchase, the priority layer is set to the “SA-CD”. With “NO DISC” displayed, press [SUPER AUDIO CD SETUP] to switch the layer. Turning the Power On SA-CD • When a disc is loaded, playback starts automatically. • When no disc is loaded, “NO DISC” is displayed.
ENGLISH Getting Started <2/5> <1/3> 8 9 Playing Discs with Even Higher Sound Quality (Pure Direct Mode) Press [PURE DIRECT]. Connections • The digital output is turned off. • The display is turned off. (Some indicators are displayed when nothing is being played and when no disc is loaded.) n Fast-forwarding and fast-reversing (searching): During playback, press and hold in [7] or [6]. • Normal playback resumes when the button is released.
ENGLISH In the stop mode, press [CALL] repeatedly. • The track numbers are displayed in the programmed order. b The total time of the tracks can be checked by pressing [TIME]. Listening to Tracks Repeatedly (Repeat Playback) Listening to a specific track repeatedly (1-track repeat playback) n Clearing all the programmed tracks: During playback, press [REPEAT] once. In the stop mode, press [CLEAR]. q In the stop mode, press [DIRECT/PROGRAM]. w Press <2/5> or [5] to open the disc tray.
ENGLISH Getting Started Playing Music files 8 <1/ 3> 9 Before Playing MP3 or WMA files Connections There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on the DCD-CX3.
ENGLISH a CD-R or CD-RW disc containing music files in 1 Load the MP3 or WMA format into the disc tray (vpage 2). b Refer to “Folder mode and disc mode settings”. Press <1/3> or [1]. Playback starts. b The file name or folder name can be displayed by pressing [TITLE] or [ARTIST]. File Name [FOLDER MODE] to select the folder mode or 1 Press disc mode. b Refer to “Folder mode and disc mode settings” (vpage 11). 2 Press [RANDOM]. The “RND” indicator lights. 3 Press <1/3> or [1].
ENGLISH Getting Started Using the Timer Play Function Also refer to the operating instructions of the audio timer. Troubleshooting DCD-CX3 (This unit) Connections If a problem should arise, first check the following: 1. Are the connections correct ? 2. Is the set being operated as described in the operating instructions ? 3. Are the other components operating properly ? If this unit does not operate properly, check the items listed in the table below.
ENGLISH Getting Started Specifications • Analog output 2 channels 2 Hz ~ 100 kHz 2 Hz ~ 50 kHz (–3 dB) 112 dB (Audible range) 109 dB (Audible range) 0.0007 % (1 kHz, Audible range) Below measurable limits 2.0 V (10 kΩ/kohms) 2 channels 2 Hz ~ 20 kHz 2 Hz ~ 20 kHz 118 dB 100 dB 0.0017 % (1 kHz) Below measurable limits 2.0 V (10 kΩ/kohms) – – – 0.5 Vp-p / 75 Ω/ohms –15 ~ –21 dBm 660 nm n Signal type: n Sampling frequency: n Usable discs: 1-bit DSD 16-bit linear PCM 2.822 MHz 44.
4.DCDCX3E3_Backpage.
www.denon.com 4.DCDCX3E3_Backpage.indd 3 Denon Brand Company, D&M Holdings Inc.
