User Guide

16
DCD-710AE
3.3
Automatic
mounting mode
・Press the
/
13 button while name of the
H.R.CHACKING is displayed.
・Count this as the 0th heat run repetition.
q Play the last track only on disc.
w The heat run repetition no. is incremented
(increased by 1) when the tray is opened.
※ If the 2 and 5 button is pressed while oper-
ating, number of heat run is displayed for 3
seconds.
e Conduct q repeatedly.
・H.R.CHACKING display
・Heat run short mode
Normal display except when 1 flashing, 3 flash-
ing
qNumber of heat run is display
XXXX : No. of heat run repetitions
・READING, CLOSEdisplay
Normal display except when 1 flashing, 3 flash-
ing
wNumber of heat run is display
XXXX : No. of heat run repetitions
3.4 Error display
E1-00 : Disc cannot be detected
E1-01 : Tracking offset adjustment not possible
E1-02 : Focus offset adjustment not possible
E2-00 : Focus servo dropped during playback.
E2-01 : Focus servo dropped during searching.
E2-03 : Focus servo dropped during TOC reading.
E2-05 : Focus servo dropped during manual
search.
E2-10 : Subcode can no longer be read during
playback
E2-11 : Subcode can no longer be read during
searching
E2-12 : Subcode can no longer be read during
TOC reading
E2-14 : Subcode cannot be read during pause
E2-15 : Subcode cannot be read during manual
search
E3-00 : TOC could not be read within specified
time
E3-01 : PVD/SVD analysis could not be
completed within specified time
E4-04 : Search time out
E4-05 : Error in communications with CD decoder
E5-00 : Inner switch not on
E6-00 : Inner switch not off
E8-00 : Tray is not opened by the specified time.
E8-01 : Tray is not closed by the specified time.
E9-01 : Other error
・
,
13 with mode light or flashing
X-XX : Error cord
No
Key name
Function Display
H
.R.CHACKING
XXXX
XXXX
CD EX-XX