User Guide

15
DCD-510AE
5.3 Error display
E1-00 : Disc cannot be detected
E1-01 : Tracking offset adjustment not possible
E1-02 : Focus offset adjustment not possible
E2-00 : Focus servo dropped during playback.
E2-01 : Focus servo dropped during searching.
E2-03 : Focus servo dropped during TOC reading.
E2-06 : Focus servo dropped during manual
search.
E2-10 : Subcode can no longer be read during
playback
E2-11 : Subcode can no longer be read during
searching
E2-12 : Subcode can no longer be read during
TOC reading
E2-14 : Subcode cannot be read during pause
E2-15 : Subcode cannot be read during manual
search
E3-00 : TOC could not be read within specified
time
E3-01 : PVD/SVD analysis could not be
completed within specified time
E4-04 : Search time out
E4-05 : Error in communications with CD decoder
E5-00 : Inner switch not on
E6-00 : Inner switch not off
E9-00 : Error in CD microprocessor
E9-01 : Other error
・ 13 lights
X-XX : Error display
5.4
Error display
switching (1)
・Press the 9 button while the error is displayed.
・ No. heat runs is displayed for 5 seconds, the error
display reappears.
・ 13 lights
XXXX : No. of heat run repetitions
・Error display reappears after 5 seconds. See 5.3.
5.5
Error display
switching (2)
・Press the 8 button while the error is displayed.
・ The track no. and time when the error occurred is
displayed for 5 seconds, then error display
reappears.
・In cases other than when 13 is lights, same
display as during normal playback.
・Error display reappears after 5 seconds. See 5.3.
No
Key name
Function Display
CD EX-XX
CD XXXX
CD 01 Tr :01 47