User Guide

12
DCD-510AE
4.2 Servo check
・Press the
/
13 button. Execute the following
steps.
q LD ON (with servo still stopped)
w FOCUS ON (disc rotation, tracking off)
If no disc loaded, retry then stop.
e CLV ON
r TRACKING ON
t SUB CODE readout (playback sound output)
y When display is as in t and the
/
13 button is
pressed, conduct BER (Block Error Rate)
display for 2 seconds.
・Press the 2 button, CD test mode display
reappears.
bPress
/
13 button continuously for over 1
second to switch directly to SUB CODE readout
in step
t.
・
13 flashing
q
w
e
r
t
@@ : T.No, XX:XX : Time
y
###### : B.E.R.
4.3
Pickup
movement
・In the stop mode, pickup moves in REV (inwards)
or FWD (outwards) direction when 8 or 9
button pressed.
・When 8 button pressed, move to stop
operation after detection that inner switch has
turned on.
・Pickup movement stops when button released.
Continuous display of previous time
4.4 Stop
・When 2 button is pressed, play operation and
servo stop.
・After stopping, conduct reading of auto adjust
values.
・13 flashing
4.5 All servo on
・When TIME/DISPLAY button is pressed, all
servos turn on, auto adjustment is performed and
switch to playback operation. (Playback sound
output)
・13 flashing
@@ : T.No, XX:XX : Time
No
Key name
Function Display
01 LD ON
02 Focus ON
03 CLV ON
04 Tracking ON
05 @@ Tr XX:XX
ERR ### ###
00 CD TEST MODE
@@ Tr XX:XX