Operation Manual

TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH
17
1. Home Theater Playback – Playing Back Using Multi-channel System –
NOTE
• When using DENON LINK 4th functions, press the and set to “HDMI On”.
• The jitter-free function does not work except during BD playback. In this case, the video signal is
output from the HDMI OUT terminal, and the audio signal from the DENON LINK terminal.
When you connect the DBP-A100 to a DENON LINK 4th compatible AV Amp using a DENON LINK
cable and HDMI cable, during BD playback the DBP-A100’s circuit operates with the AV Amp’s master
clock signal. (The clock control indicator of the DBP-A100 lights.) This enables transmission of high-
quality digital audio with minimal jitter.
DENON LINK
AUDIO
IN
HDMI
AV Amp
DENON LINK Connection q Making a Jitter-free Connection
BD
Connecting to an AV Amp with No HDMI Video Input
VIDEO
VIDEO IN
S VIDEO IN
Y
P
B
PR
COMPONENT
VIDEO IN
AV Amp
NOTE
DENON LINK does not support BD audio transmission.
• When connecting to a DENON LINK-compatible AV Amp, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.
• The DENON LINK connection requires the version of AV Amp to be connected to match the DBP-
A100 version. Check the version of the AV Amp, and then on the GUI Menu, set “DENON LINK
Setup” – “DENON LINK Mode” (vpage 28).
If the DBP-A100 and AV Amp versions do not match, audio cannot be output correctly.
DENON LINK
AUDIO
AV Amp
• DENON LINK supports digital transmission up to 24 bit/2-ch at 192/176.4 kHz, and up to 24 bit/6-ch
at 96 kHz or less.
• When you have made a DENON LINK connection, the DBP-A100’s speaker setting becomes invalid.
(Make the speaker setting on the connected AV Amp)
• DENON LINK 2nd cannot transmit multi/stereo area audio of a Super Audio CD.
DENON LINK Connection w Making a Normal Connection
• Check the video terminals and connect to one of them.
• When connecting using the component video outputs, press
and set it to “HDMI Off”.
Connections
1.DBP-A100_E3_ENG_007.indd 17 2010/08/12 19:20:09