User Guide

13
DBP-2010CI
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
About tightening screws
When tightening screws, tighten them with the
following torque.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 9(S-1) ---
[2] Tray Panel D2 --------------- 1
[3]
Front
Assembly
D2
*2(L-1), *(L-2), 5(S-2),
9(S-3), *CN2002
2
[4]
Front A
CBA
D2 *CN3001 ---
[5]
Front B
CBA
D2 --------------- ---
[6]
Front
Bracket
D3 7(S-4), (S-5) ---
[7]
SD CBA D3 2(S-6), *CN5001 ---
[8] Rear Panel D4
5(S-7), (S-8), 2(S-9),
(S-10), (S-11),
11(S-12), 2(S-13),
2(S-14), *CN1006
---
[9]
Motor DC
Fan
D4 --------------- ---
[3] Front
Assembly
[1] Top Cover
[2] Tray Panel
[8] Rear Panel
[13] Video CBA
[14] AV PCB
Bracket
[16] Loader
Bracket
[9] Motor
DC Fan
[10] Inlet CBA
[11] RS232C
CBA
[6] Front Bracket
[15] BD Main CBA
& BD Mechanism
Assembly
[7] SD CBA
[18] Power
Holder
[17] Power
Supply CBA
[12] Audio CBA
[4] Front A CBA
[5] Front B CBA
[10] Inlet CBA D4 *CN1001 ---
[11]
RS232C
CBA
D4 *CN5501
[12] Audio CBA D5
5(S-15), *CN2005,
*CN2007, *CN2008
---
[13] Video CBA D6 4(S-16), *CN7101 ---
[14]
AV PCB
Bracket
D6 4(S-17) ---
[15]
BD Main
CBA & BD
Mechanism
Assembly
D6
4(S-18), *CN6001,
*CN7601
3
[16]
Loader
Bracket
D6 6(S-19)---
[17]
Power
Supply
CBA
D7 3(S-20), 2(S-21) ---
[18]
Power
Holder
D7 3(S-22) ---
p
(1)
p
(2)
p
(3)
p
(4)
p
(5)
Torque
0.45 ± 0.05 N·m
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note