Connections Playback Settings Tips Appendix . Contents RCD-M41 / RCD-M41DAB CD RECEIVER Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Basic operation Turning the power on Switching the power to standby Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Playing CDs Playing CDs Playing tracks in a specific order (Program playback) Playing DATA CDs Playing files Listening to DAB/FM broadcasts Listening to DAB/FM broadcasts Automatically presetting FM stations (Auto Preset) Presetting FM stations manually Listening to preset stations Setting the preset channels
Contents Connections Playback Listening to music on a Bluetooth device Playing music from Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device Turning the Bluetooth function off for high sound performance playback Listening to DIGITAL IN Listening to ANALOG IN Convenience functions Adjusting the tone Sleep timer function Checking the current time Switching the display’s brightness Front panel Display Rear panel Settings Tips Appendix Settings 41
Contents Connections Playback Settings Tips Tips 58 59 67 Tips Troubleshooting Resetting factory settings Appendix 68 69 69 70 72 73 75 76 80 Playing back DATA CDs DIGITAL IN Playing back Bluetooth devices About Discs Last function memory Explanation of terms Trademark information Specifications Index Front panel Display Rear panel 4 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features 0 High quality headphone Amp with Amp gain control 0 High quality amplifier stressing sound quality This unit is equipped with a high-quality headphone amplifier on which the gain can be adjusted. A variety of headphones are supported. Equipped with a 30 W + 30 W (6 Ω/ohms) high-quality amplifier circuits.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w e r t y RCD-M41DAB . u For details, see the next page.
Contents q Connections w e Playback Settings Tips Appendix C Disc tray Used to insert a disc. (v p. 27) rty RCD-M41DAB D Disc tray open/close button (5) Opens and closes the disc tray. . E Play/Pause button (1/3) Plays the track/Pauses the track. u i F Stop button (2) Stops playback. BAND button (for RCD-M41DAB only) This switches between FM and DAB, when you use the tuner. o G Bluetooth button (V) This switches the input to Bluetooth. This is also pressed during the pairing operation.
Contents Connections Playback Settings . M Reverse-skip/Forward-skip buttons (8, 9) This skips to the start of the track. Preset/Tuning buttons (–, +) These select FM broadcast and DAB broadcast (for RCD-M41DAB only). (v p. 31) Q3 J Headphones jack (PHONES) Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers. NOTE 0 To prevent hearing loss, do not raise the volume level excessively when using headphones.
Contents Connections Playback Settings Tips Appendix Display w e r t u . q y i A Playback mode indicators 1 : Lights up during playback. 3 : Lights up during pause. D TOTAL indicator Lights up when the total number of tracks and total time of the CD are displayed. B Tone indicators SDB: Lights up when the super dynamic bass function is set to “ON”. TONE: Lights up when the tone (BASS/TREBLE) is being adjusted. E Play mode indicators These light according to the play mode settings.
Connections Contents Playback Settings Tips Rear panel RCD-M41DAB DAB/FM 50 ENNA q w e r AC IN FM 75 ANTENNA ANALOG IN SUB WOOFER OUT DIGITAL IN 1 L OPTICAL 2 R R L . SPEAKERS t For details, see the next page.
Contents Connections Playback Settings 50 ENNA q w e r B Subwoofer connector (SUBWOOFER OUT) Used to connect a subwoofer with a built-in amplifier. (v p. 19) C Digital audio connectors (DIGITAL IN) Used to connect devices equipped with digital audio connectors. (v p. 20) AC IN FM 75 ANTENNA ANALOG IN SUB WOOFER OUT DIGITAL IN 1 L OPTICAL 2 D AC inlet (AC IN) Used to connect the supplied power cord. (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit A POWER button (X) This turns the power on/standby. (v p. 25) q w e r B DIMMER button Adjust the display brightness of this unit. (v p. 50) C CLOCK button The current time appear on the unit. (v p. 49) t D SLEEP button This sets the sleep timer. (v p. 49) E Input source select buttons These select the input source. (v p. 26) y F System buttons These perform playback related operations.
Contents Connections Playback Settings Tips Appendix G Signal transmitter This transmits signals from the remote control unit. (v p. 6) u H CHANNEL buttons (+, –) This switches between preset channels. (v p. 31) I FOLDER/ALL button This switches the playback range on a data CD. (v p. 29) J MUTE button (:) This mutes the output audio. (v p. 26) K ENTER button This determines the selection. i L Cursor buttons (uio p) These select items.
Contents Connections Playback Settings Tips Appendix O RANDOM button Switches the random playback. P REPEAT button Switches to the repeat playback. Q SDB/TONE button Adjusting the tone. (v p. 48) R VOLUME buttons (df) These adjust the volume level. (v p. 26) Q7 S Information button (INFO) This switches the track information shown in the display during playback. Q8 T SETUP button The setting menu is displayed on the display. (v p. 52) Q9 U CLEAR button This cancels the settings.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections Provide necessary cables according to the devices you want to connect. 18 20 20 Connecting a DAB/FM antenna 21 Connecting the power cord 23 Speaker cable Subwoofer cable . Connecting an analog device Connecting a digital device . Speaker connection NOTE Optical cable . 0 Do not plug in the power cord until all connections have been completed. 0 Do not bundle power cords with connection cables.
Contents Connections Playback Settings Tips Appendix Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. 2 Turn the speaker terminal counterclockwise to loosen it. NOTE . 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal.
Connections Contents Playback Settings Connecting the subwoofer Tips Appendix Connecting speakers Use a subwoofer cable to connect the subwoofer. ANALOG IN SUB WOOFER OUT Speaker (SC-M41, sold separately) DIGITAL IN 1 L OPTICAL 2 R (R) w R (L) q w q L SPEAKERS FM 75 ANTENNA ANALOG IN SUB WOOFER OUT OPTICAL 2 . Subwoofer DIGITAL IN 1 L R R L .
Connections Contents Playback Settings Tips Appendix Connecting an analog device Connecting a digital device You can connect this unit to various devices with analog audio output. You can connect this unit to devices with digital audio output (TV, digital gear, etc.).
Contents Connections Playback Settings Tips Appendix Connecting a DAB/FM antenna After connecting the antenna and receiving a broadcast signal, fix the antenna with tape in a position where the noise level becomes minimal. “Listening to DAB/FM broadcasts” (v p.
Contents Connections Playback Settings Tips NOTE 0 For best results with the supplied indoor antenna, orient the antenna along a wall such that it is stretched out horizontally and parallel to the floor (but above the floor), and then fasten the two end tabs to the wall. This type of antenna is directional and best results will be obtained when it is correctly oriented toward the transmitting location.
Contents Connections Playback Settings Tips Appendix Connecting the power cord After completing all the connections, insert the power plug into the power outlet. 【for continental】 【for UK】 AC IN AC IN 75 75 R R DIGITAL IN 1 OPTICAL DIGITAL IN 1 2 OPTICAL 2 L L EAKERS EAKERS Power cord (supplied) Power cord (supplied) To household power outlet (AC 230 V, 50/60 Hz) . .
Contents Connections Playback Settings o Contents Tips Other functions Basic operation Convenience functions Turning the power on 47 25 Switching the power to standby 25 Selecting the input source 26 Adjusting the volume 26 Turning off the sound temporarily (Muting) 26 Playback a device Playing CDs 27 Playing DATA CDs 29 Listening to DAB/FM broadcasts 31 Listening to music on a Bluetooth device 41 Listening to DIGITAL IN 45 Listening to ANALOG IN 46 Front panel Appendix Dis
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on POWER X Input source select buttons 1 Press POWER X to turn on power to the unit. The power indicator lights green. 0 You can also press X on the main unit to turn on power from standby mode. VOLUME df MUTE Switching the power to standby 1 Press POWER X. The unit switches to standby mode. 0 You can also switch the power to standby by pressing X on the main unit. NOTE .
Contents Connections Playback Settings Selecting the input source 1 Tips Turning off the sound temporarily (Muting) Press the input source select button to be played back. 1 The desired input source can be selected directly. 0 You can also select the input source by pressing q on the main unit. 0 Press TUNER again while the source is set to “TUNER” to switch between DAB/FM band. (for RCD-M41DAB only) Press MUTE :. “MUTE ON” is displayed.
Contents Connections Playback Settings Tips Appendix Playing CDs Playing CDs 1 2 CD 1/3 2 89 67 Press CD to switch the input source to “DISC”. Insert a disc. (v p. 70) Playback starts. 0 Press 5 on the main unit to open/close the disc tray. 0 You can set whether to automatically play CDs. (v p. 56) INFO NOTE 0 Do not place any foreign objects in the disc tray. Doing so could result in damage. 0 Do not push the disc tray in by hand when the power is turned off. Doing so could result in damage.
Contents Connections Operation buttons Playback Settings Playback / Pause 2 Stop 89 Skip to previous track / Skip to next track 67 (Press and hold) Fast-reverse / Fast-forward 0 – 9, +10 Select the track RANDOM Random playback REPEAT Repeat playback 0 Switching between Single-track repeat and All-track repeat. INFO Switching the elapsed time display Appendix Playing tracks in a specific order (Program playback) Function 1/3 Tips Up to 25 tracks can be programmed.
Contents Connections Playback Settings Tips Appendix Playing DATA CDs 0 This section explains how to playback music files that are recorded onto a CD-R or CD-RW. 0 There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) format. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on this unit.
Contents Connections Playback Settings Playing files 1 2 Tips Operation buttons Appendix Function 1/3 Playback / Pause Press CD to switch the input source to “DISC”. 2 Stop Load a CD-R or CD-RW containing music files into the disc tray. (v p. 70) 89 Skip to previous track / Skip to next track 67 (Press and hold) Fast-reverse / Fastforward ui Folder select Playback starts. 0 Press 5 on the main unit to open/close the disc tray.
Contents Connections Playback Settings Tips Appendix Listening to DAB/FM broadcasts For details about how to connect the antenna, see “Connecting a DAB/FM antenna” (v p. 21). Listening to DAB/FM broadcasts TUNER 1 TUNE +, – 2 CHANNEL +, – INFO uio p ENTER DAB/RDS Press TUNER to select the reception band. DAB: When listening to a DAB broadcast. (for RCD-M41DAB only) FM AUTO: When listening to an FM broadcast.
Contents 2 Connections Playback Settings Tips Appendix Automatically presetting FM stations (Auto Preset) Use TUNE + or TUNE – to select the station you want listen to. When a station is received, the “TUNED” indication will light. 0 When “FM AUTO” is selected: Automatically search for and tune to a receivable radio station. 0 When “FM MONO” is selected: Manually change the frequency one step at a time each time the button is pressed.
Contents Connections Playback Settings o Giving station names to preset channels 3 1 2 Tune in the preset channel you want to name. Press ENTER twice. The display switches to the station name input display. 3 Input the station name. Names of up to 8 characters can be input. ui : Selects the character. op: Moves the cursor to the left or right. CLEAR : Tune in the station you want to preset. Press ENTER. The minimum number display “P– –” for the unregistered preset flashes.
Contents Connections Playback Settings Listening to preset stations 1 Tips Appendix Setting the preset channels and changing the received frequency on the main unit Use 0 – 9, +10 or CHANNEL –, + to select the preset number. Preset/Tuning buttons (–, +) on the main unit can be used both for switching the preset channel and for tuning. Before operating them, switch the main unit to the “PRESET MODE” or “TUNING MODE” using the procedure below.
Contents Connections Playback Settings Press INFO while receiving a RDS to display the information currently being broadcast. RDS is a broadcasting service which allows a station to send additional information along with the regular radio program signal. Use this function to automatically tune to FM stations that provide the RDS service. Note that the RDS function only works when receiving RDS compatible stations. Freq. Press TUNER to select “FM AUTO” or “FM MONO”.
Contents Connections Playback Settings 1 2 3 4 5 PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). PTY identifies the type of RDS program.
Contents Connections Playback Settings TP search RT allows RDS stations to send text messages that appear on the display. 0 When the RT mode is turned on while an RDS broadcast station not offering an RT service is tuned in, “NO RT” is displayed on the display. 0 The operations described below selecting “RDS SEARCH” will not function in areas in which there are no RDS broadcasts. Press TUNER to select “FM”. Press DAB/RDS. Use ui to select “TP SEARCH”, then press ENTER. Use o p.
Contents Connections Playback Settings CT (Clock Time) 2 n About DAB (Digital Audio Broadcasting) During CT reception, press SETUP. “AUTO Adj mm:ss” is displayed. 0 Since the DAB system is broadcasted in digital format, DAB system Press ENTER to set. “RDS mm:ss” is displayed. 0 The time on the set’s internal clock is updated to the currently displayed “CT” time. 0 0 NOTE 0 0 Do not operate any buttons while the time is being updated.
Contents Connections Playback Settings 0 The main difference between DAB and DAB+ is the type of audio codec used. DAB: MPEG2 DAB+: MAEG4 (AAC) 0 This unit can receive both DAB and DAB+ broadcasts. 1 Press INFO during DAB reception. Dynamic Label Segment: Text data included in the broadcast is scrolled. Station Name: The service station name is displayed. Press TUNER to select “DAB”.
Contents Connections Playback Settings Tips Appendix o Making the DAB settings 1 2 DRC (Dynamic Range Control): The DRC (Dynamic Range Control) function is effective when in a noisy environment and in quiet sections of broadcast programmes. The broadcast’s DRC level is set at the broadcast station. The DRC function lets you change to achieve the optimum level. 0 OFF: DRC is switched off. Any DRC level broadcast will be ignored. 0 1/2: DRC level is set to 1/2 that sent with the broadcast.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 10 m. Bluetooth 1/3 2 89 67 NOTE . 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile.
Contents Connections Playback Settings 4 Playing music from Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 0 When “Denon RCD-M41” is not displayed in the screen on the Bluetooth device, search for devices on the Bluetooth device. 0 Enter “0000” when the password is requested on the screen of the Bluetooth device.
Contents Connections Operation buttons Playback Settings Playback / Pause 2 Stop 89 Skip to previous track / Skip to next track 67 (Press and hold) Fast-reverse / Fastforward Appendix Pairing with other Bluetooth devices Function 1/3 Tips Pair a Bluetooth device with this unit. 1 2 NOTE 3 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile.
Contents Connections Playback Settings Reconnecting to this unit from a Bluetooth device 2 3 4 Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. 1 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected. Press and hold Bluetooth for 8 seconds or longer.
Contents Connections Playback Settings Tips Appendix Listening to DIGITAL IN OPTICAL IN1 OPTICAL IN2 1 ANALOG IN 2 3 Prepare for playback. Check the connection “Connecting a digital device” (v p. 20), then turn on this units. Press OPTICAL IN1 or OPTICAL IN2 to switch the input source to “OPTICAL IN 1” or “OPTICAL IN 2”. Play the component connected to this unit. NOTE 0 Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise and could damage the speakers.
Contents Connections Playback Settings Tips Listening to ANALOG IN 1 2 3 Prepare for playback. Check the connection, then turn on this units. Press ANALOG IN to switch the input source to “ANALOG IN”. Play the component connected to this unit.
Contents Connections Playback Settings Tips Appendix Convenience functions Adjusting the tone SLEEP CLOCK DIMMER 48 Sleep timer function 49 Checking the current time 49 Switching the display’s brightness 50 SDB/ TONE .
Contents Connections Playback Settings 2 Adjusts the treble sound. Press SDB/TONE to select the tone parameter to be adjusted. –10 dB – +10 dB (Default : 0 dB) n BALANCE Use o p to adjust the “SDB”, “BASS”, “TREBLE”, “BALANCE” or “S.DIRECT”. Use o p to adjust the left/right volume balance. n S.DIRECT (Source Direct) n SDB (Super Dynamic Bass) ON: Emphasizes the bass sound (maximum +8 dB). OFF (Default): Disable SDB (Super Dynamic Bass) function.
Contents Connections Playback Settings Sleep timer function Be sure to set the current time using “CLOCK SETUP” in the setup menu in advance. (v p. 53) o Checking the current time when the power is on Press SLEEP during playback and select the setting time. 0 The “SLEEP” indicator on the display lights. Press CLOCK. 0 Press once more and the display returns to its original condition. 0 You can set the sleep timer in the range from 10 to 90 minutes in steps of 10 minutes.
Contents Connections Playback Settings Tips Switching the display’s brightness The brightness of the display can be adjusted to one of four levels. 1 Press DIMMER. 0 The brightness of the display switches each time the button is pressed. 0 If the buttons are operated when the display is turned off, information is displayed temporarily at a low brightness level. 0 The display brightness is set to most brightly by default.
Contents Connections Playback Settings Tips Appendix Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Description Page CLOCK SETUP Sets the current time. 53 ALARM SETUP Sets the timer playback. 53 ALARM ON/OFF Set the timer playback to on or off. 54 H/P AMP GAIN Set the gain of the headphone amplifier.
Contents Connections Playback Settings 1 2 3 4 uio p ENTER Press SETUP. The menu is displayed on the display. Use ui to select the menu to be set or operated, then press ENTER. Use uio p to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press o. 0 Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears. SETUP .
Contents Connections Playback Settings Audio from the set input source can be played back at a specified time. Audio can also be played at the same time every day. Sets the current time. 3 4 Use ui to set the “hours”. 1 Press ENTER. Use ui to set the “minutes”. Press ENTER. The current time is set, and the menu display disappears. n Checking the current time when the power is on Playback starts and stops (the power turns off) once only at the set times.
Contents Connections Playback Settings Tips ALARM ON/OFF C VOLUME SELECT Use ui to adjust the volume, then press ENTER. Set the timer playback to on or off. 1 2 D ON TIME Use ui to select “hours” for the alarm start time, then press ENTER. Use ui to select “minutes” for the alarm start time, then press ENTER. Use ui to select “ONCE” or “EVERYDAY”. Use o p to select “ON” or “OFF” for the alarm, then press ENTER. The alarm settings are displayed.
Contents Connections Playback Settings H/P AMP GAIN Appendix SPK OPTIMISE Set the gain of the headphone amplifier. Set this according to the impedance of the connected headphones. It is recommended that this is set on the “LOW” side if the headphones have low impedance and on the “HIGH” side if they have high impedance. HIGH: Set the gain of the headphone amplifier to “HIGH”. Set when there is insufficient volume, even when the gain setting is “MIDDLE”.
Contents Connections Playback Settings Tips CD AUTO PLAY When the CD tray is closed, the unit can detect the DISC, automatically switch the input source to DISC and start playback of the disc. ON (Default): Performs automatic playback. OFF: Does not perform automatic playback. CLOCK MODE The clock is constantly displayed. ON: Display the clock. Press the POWER X button to switch between the clock display and the normal display. OFF (Default): Does not display the clock.
Contents Connections Playback Settings o Contents Tips Appendix Troubleshooting Tips Power does not turn on / Power is turned off 59 I want to play back music with a single operation from the standby state LED is flashing 60 58 Operations cannot be performed through the remote control unit 61 I want to turn on power to this unit from a Bluetooth device 58 Display on this unit shows nothing 61 I want to listen to high sound performance playback 58 No sound comes out 62 I want to adju
Contents Connections Playback Settings Tips Appendix Tips I want to play back music with a single operation from the standby state 0 When a input source select buttons, 1/3 button or 5 button is pressed, the operation is performed at the same time as the unit switches on. I want to turn on power to this unit from a Bluetooth device 0 Once you perform pairing between this unit and a Bluetooth device, you can turn on power to this unit by operating the Bluetooth device.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following. 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix o LED is flashing Symptom Cause / Solution Page Flashing red. (Flashes at 0.25 second intervals) 0 The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. － Flashing red. (Flashes at 0.5 second intervals) 0 Protection circuit activated due to a rise in internal temperature.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page 0 Batteries are worn out. Replace with new batteries. 6 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 6 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution Page 0 Check the connections for all devices. 17 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 18 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix o Desired sound does not come out Symptom Cause / Solution Page Left/right volume balance is 0 Press the SDB/TONE button on the remote control to adjust the balance. unbalanced. 48 No sound from the sub woofer. 19 0 Check the subwoofer connections. 0 Switch the subwoofer power on. － Set values are not reflected 0 “SDB (Super Dynamic Bass)”, “BASS” and “TREBLE” setting values are not reflected in subwoofer out.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom Cause / Solution Page When making a call on iPhone, noise occurs in audio output on this unit. 0 When making a call, keep a distance of 20 cm or longer between iPhone and this unit. － Noise often occurs in DAB/FM broadcasting. 0 Change the antenna orientation or position. 21 0 Use an outdoor antenna. 21 0 Separate the antenna from other connection cables.
Contents Connections Playback Settings Tips Appendix o Cannot playback Discs Symptom Cause / Solution Page Cannot playback when the 1/3 button is pressed, or cannot correctly play back a specific part of the disc. 0 The disc is dirty or scratched. Either clean the disc, or insert a different disc. 70 Cannot playback CDR/CD-RW. 0 CDs cannot be played back unless they have been finalized. Use a finalized disc.
Contents Connections Playback Settings Tips Appendix o Bluetooth cannot be played back Symptom Bluetooth devices cannot be connected to this unit. The sound is cut off. Cause / Solution Page 0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the － 0 Bring the Bluetooth device near to this unit. － Bluetooth device to enable the Bluetooth function. 0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. 1 2 Place this unit in Standby mode using X. While pressing and holding q, press and hold X for 3 seconds. “INITIALIZE” is displayed. . 0 Repeat this process if “INITIALIZE” is not displayed.
Contents Connections Playback Settings Tips Appendix Playing back DATA CDs o DATA CDs formats o Playable files CD-R and CD-RW discs created in the format described below can be played. Writing software format ISO9660 level 1 When written in other formats, it may not be possible to play the disc properly. Maximum number of playable files and folders Total number of folders and files : 512 Maximum number of folders : 256 Sampling frequency Bit rate Extension MP3 32/44.1/48 kHz 32 – 320 kbps .
Contents Connections Playback Settings DIGITAL IN Appendix Playing back Bluetooth devices This unit supports the following Bluetooth profiles. 0 A2DP (Advanced Audio Distribution Profile) : When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality. 0 AVRCP (Audio/Video Remote Control Profile) : When a Bluetooth device that supports this standard is connected, the Bluetooth device can be operated from this unit.
Contents Connections Playback Settings Tips Appendix About Discs o Discs playable on this unit A Music CDs Discs marked with the logo below can be played in this unit. B CD-R/CD-RW o Loading discs 0 Place the disc in the tray, label side up. r 0 Make sure the disc tray is fully open when inserting the disc. 0 Place the discs flat, 12 cm discs in the outer tray guide, 8 cm discs in the inner tray guide. 0 Place 8 cm discs in the inner tray guide without using an adapter.
Contents Connections Playback Settings Tips Appendix o Cautions on storing discs o Cautions on loading discs 0 Be sure to remove discs after using them. 0 Be sure to store discs in their cases to protect them from dust, 0 Only load one disc at a time. Loading two or more discs can damage the unit or scratch the discs. 0 Do not use cracked or warped discs or discs that have been repaired with adhesive, etc.
Contents Connections Playback Settings Tips Last function memory This stores the settings as they were immediately before going into the standby mode. When the power is turned back on, the settings are restored to as they were immediately before going into the standby mode.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audio Sampling frequency This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD.
Contents Connections Playback Settings Tips o Others Finalizing Finalization is the process that makes recorded CD-R/CD-RW discs playable on compatible players. Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth. When paired, the devices authenticate each other and can connect without mistaken connections occurring.
Contents Connections Playback Settings Tips Appendix . Trademark information Front panel Display Rear panel . The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. Adobe, the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Contents Connections Playback Settings Tips Specifications o Audio section 0 CD player Playable frequency response: 2 Hz - 20 kHz Wow & flutter: Below measurable limits (± 0.001 %) Sampling frequency: 44.1 kHz 0 Audio amplifier Rated output: 2-channel 30 W + 30 W (6 Ω/ohms, 1 kHz, T.H.D. 10 %) o Tuner section [FM] [DAB] Receiving Range: 87.50 MHz – 108.00 MHz BAND3 174 MHz – 240 MHz Effective sensitivity: 1.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Version 4.0 Transmission power: Power Class 1 Maximum communication range: Approx. 10 m in line of sightz Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings Tips o Clock/Alarm/Sleep Clock type: Crystal oscillator (Within 1 – 2 minutes per month) Alarm: Once alarm/Everyday alarm: One system each Sleep: Sleep timer: Max. 90 minutes o General Power supply: AC 230 V, 50/60 Hz Power consumption: 70 W Power consumption in clock mode : 14 W Power consumption in standby mode : 0.3 W 0 For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips o Dimensions 123 12 45 272 199 28 25 Unit : mm 130 107 115 210 30 152 29 . 29 o Weight : 4.
Contents Connections Index Playback Settings Tips vM Menu map ...................................................... 51 Muting ............................................................ 26 vA Adjusting the tone .......................................... 48 Alarm .............................................................. 53 Auto Standby ................................................. 55 vR Rear panel ...................................................... 12 Remote control unit ...............
. www.denon.com 81 3520 10546 10AD Copyright ©2017 D&M Holdings Inc. All Rights Reserved.
