E8701UD(EN).qx4 07.3.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E8701UD(EN).qx4 07.12.17 10:53 AM Page 3 PRECAUTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. INSIDE, NEAR THE DECK MECHANISM.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 4 PRECAUTIONS Dew Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the DVD Player at least for 2 hours until its inside is dry. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 5 The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.
E8701UD(EN).qx4 07.3.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 7 ¡Progressive Scan system Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback) using the remote control. Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional (525i/480i) television signals.
E8701UD(EN).qx4 07.12.17 10:53 AM Page 8 FUNCTIONAL OVERVIEW FRONT PANEL 1 12 3 2 1 2 4 5 DISC 3 DVD VIDEO AUTO CHANGER 11 10 8 35 4 9 5 6/24 33 7/25 DVM-1845 34 REMOTE CONTROL 1 ON POWER MODE OFF OPEN / CLOSE 32 3 A-B REPEAT 13 1 2 3 4 5 6 7 8 9 0 +10 AUDIO DISPLAY 31 REPEAT 14 15 16 17 18 19 RANDOM ZOOM ANGLE 1. 2. 3. 4. 5. 6. 7. 8. 30 CLEAR SUBTITLE 9. 10. 11. 12.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 9 FUNCTIONAL OVERVIEW Buttons on remote control work in different ways for DVD Video, Video CD, Audio CD, MP3, JPEG, WMA and DivX®: Refer to the following table for correct use. POWER ON/OFF Buttons A-B REPEAT Button REPEAT Button DVD-Video Video CD CD, MP3, JPEG, WMA DivX® • To turn on or standby the unit. • To turn on or standby the unit. • To turn on or standby the unit. • To turn on or standby the unit.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 10 FUNCTIONAL OVERVIEW Tour of the Remote Control CLEAR Button MENU Button TOP MENU Button DVD-Video Video CD • To clear the markers. • To clear the numbers entered incorrectly. • To cancel the A point for A-B Repeat. • To clear the markers. • To clear the numbers entered incorrectly. • To cancel the A point for A-B Repeat. CD, MP3, JPEG, WMA DivX® • To clear the markers. (CD) • To clear the numbers • To clear the numbers entered incorrectly.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 11 FUNCTIONAL OVERVIEW Displays a type of the disc which is on the tray. • DVD: DVD-Video, DivX® • CD: Audio CD, MP3, JPEG, WMA, Video CD, DivX® Lights up when the progressive scan system is activated. Lights up when the disc playback comes to a pause. Lights up when playing back in slow mode. (DVD-Video, Video CD, DivX®) Lights up when the repeat function is on. Lights up when the inserted disc is being play back. The present display state is shown. • TL./GR.
E8701UD(EN).qx4 07.12.17 10:53 AM Page 12 FUNCTIONAL OVERVIEW Loading the Batteries Using a Remote Control 1. Open the battery compartment cover. 2. Insert two “AA” (R6P) batteries, with each one oriented correctly. 3. Close the cover. Cautions On Batteries • Use “AA” (R6P) batteries in this remote control unit. • Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.
E8701UD(EN).qx4 07.12.17 10:53 AM Page 13 CONNECTIONS English Description - Rear Panel 1 2 3 4 5 6 7 1. HDMI OUT Jack Use an HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port. 2. AUDIO OUT Jacks Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system. 3.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 14 CONNECTIONS The following shows examples of connections commonly used to connect the DVD player to TV and other components. If using this DVD player to play back a DVD in a Dolby Digital Multi channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
E8701UD(EN).qx4 07.3.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 16 CONNECTIONS Connection to a TV with an HDMI Compatible Port A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 17 DISC PLAYBACK DVD-V VCD HDMI Setup CD MP3 WMA JPEG DivX® 1 Press the HDMI button on the front panel to select the HDMI output mode. The output mode changes as follows every time the HDMI button is pressed. Getting started • • • The HDMI indicator on the front panel lights up when HDMI output mode is on. Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 18 DISC PLAYBACK Title Menu Fast Forward / Reverse Search DVD-V 1 Press the TOP MENU button. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection. DVD-V • Playback will begin at the selected title. 3 Press the RETURN button to go back to the title menu.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 19 DISC PLAYBACK Track Search DVD-V VCD JPEG DivX® CD MP3 JPEG WMA DivX® There are two ways to begin playback a disc at a specific track. By using the SEARCH MODE button desired zoom factor: x2, x4 or off. • Only x2 zoom is available on Video CDs, JPEG and DivX®. x2 VCD PBC OFF This function allows you to enlarge the video image and to pan through the zoomed image. 1 Press the ZOOM button during playback. • Playback will continue.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 20 DISC PLAYBACK REPEAT TRACK / GROUP / DISC Marker Setup Screen DVD-V VCD VCD CD You can use markers to memorize your favorite places on a disc. 1 Press the SEARCH MODE but- 1 2 3 4 5 6 7 8 9 10 AC DVD -- --:--:-- To activate Repeat function, press the REPEAT button during playback. • ton repeatedly until the display screen and Markers appear during playback.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 21 DISC PLAYBACK Program Playback MP3 This function allows you to program a playback order of Audio CD, MP3, JPEG, or WMA in a desired sequence. button. • The PROGRAM screen will appear. 2 Press the Cursor buttons (K or PROGRAM CD-DA CD-DA CD-DA DVD • A track selection screen appears. 3 Press the Cursor buttons (K or ALL CLEAR 1/ 1 CD-DA L) to select a track, then press the ENTER button to save it in a program.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 22 DISC PLAYBACK Random Playback MP3 / JPEG / WMA Playback This function shuffles the playback order of tracks instead of playback in the original sequence. CD MP3 JPEG WMA When playing back tracks in a single disc randomly. 1 In stop mode, press the RANDOM button once or press the MODE button twice. • The RANDOM screen is displayed. 2 Press the PLAY button to start RANDOM CD-DA RANDOM PROGRAM --no indication-- random playback.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 23 DISC PLAYBACK Applicable MP3 file Sampling frequency 44.1kHz 48kHz Type MPEG1 audio layer 3 Applicable JPEG file Remarks • It is prohibited to record MP3 sound on a digital device when the connection is made digitally. • MP3 files recorded at fixed bit rate of 32 kbps or higher are recommended. Kodak Picture CD The DVD player can also run JPEG files stored on Kodak Picture CDs.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 24 DISC PLAYBACK • When using tools or utilities to make up DivX® files, read their instruction manual beforehand. • A DivX® file whose file size exceeds 2GB cannot be played back. • If a large-sized DivX® file is selected, it may take a while to start the playback (over 20 seconds sometimes). • Constant bitrate of image between 500 kbps and 4,000 kbps is recommended if you make DivX® files on a CDR/RW.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 25 DISC PLAYBACK VCD desired extension you want to display, then press the ENTER button. DivX® with the subtitle starts playback. The subtitle cannot be displayed when the setting is “OFF”. show current disc number. • If there is more than one extension, the extension selection appears in the SUBTITLE LIST. NOTES: • DivX® subtitle can only be displayed according to the same name with an extension of the DivX® file name. • Files whose extension is other than “.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 26 DISC PLAYBACK Dialog Speed WMA 1 Press the DISPLAY button once during playback to show current disc number. 2 Press the DISPLAY button during playback. DVD-V TRACK 01 Available only on discs recorded in the Dolby Digital format, Dialog Speed plays back in slightly faster or slower speed while keeping the sound quality as in the normal playback. 1 During playback, press the TITLE NAME • Current file name will be displayed. 3 Press the DISPLAY button again.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 27 DISC PLAYBACK NOTES: Camera Angle DVD-V Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) mark appears on the screen. 1 Press the ANGLE button during playback. • The selected angle will be displayed on the display bar at the top of the screen. 2 Press the ANGLE button repeatedly to select your desired angle.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 28 DISC PLAYBACK Stereo Sound Mode VCD CD 1 Press the AUDIO button repeatedly during play- back to select your desired sound mode. STEREO - both right and left channels are active (stereo) L-ch - only left channel is active R-ch - only right channel is active STEREO Both right and left channels are active (stereo). L-ch Only the left channel is active. R-ch Only the right channel is active. NOTE: • The STEREO can only be output when playing back DTS CD.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 29 In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 29-31). QUICK mode consists of the setting menus frequently used, and they are accompanied with QUICK mark. You can make all settings in CUSTOM mode. STILL MODE (Default : AUTO) Language Setting • Press the Cursor buttons (K or L) for an item selection (AUTO, FIELD, or FRAME), then press the ENTER button.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 30 DVD SETUP Audio Setting Ratings Control You can change some Audio settings. It only affects during the playback of DVD discs. 1 Press the SETUP button in stop mode. 2 Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button. RATING LEVEL AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS AUDIO MODE ON OFF BITSTREAM BITSTREAM HDMI You can set a viewing limit through Rating Level.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 31 DVD SETUP Others Setting Reset to the Default Settings then press ENTER. 3 Press the Cursor buttons (K or L) to select YES, 3 Press the Cursor buttons (s or • Press the ENTER button repeatedly to turn ON or OFF. This allows you to return all selections of SETUP (except for RATINGS) to their default settings. 1 Press the SETUP button in stop mode. 2 Press the Cursor buttons (s or B) to select INITIALIZE, then press the ENTER button.
E8701UD(EN).qx4 07.3.
E8701UD(EN).qx4 07.3.20 5:46 PM Page 33 TROUBLESHOOTING GUIDE Problem Solution No power – Check if the AC power cord is properly connected. – Unplug the AC power cord once, and wait for 5-10 seconds and then plug it in again. –– –– No sound or picture – Check if the TV is turned on. – Check the video connection and HDMI connection. – Check the VIDEO/AUDIO cable connections. – Check if the PROGRESSIVE mode is set correctly.
E8701UD(EN).qx4 07.3.20 5:47 PM Page 34 SPECIFICATIONS SIGNAL SYSTEM NTSC color APPLICABLE DISCS (1) DVD-Video Discs 1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs (1 layer per side) 1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs, 2-layer 8cm double-sided discs (1 layer per side) (2) DVD-R/DVD-RW (3) Compact discs (Audio CD, Video CD) 12cm discs, 8cm discs (4) CD-R/CD-RW S-VIDEO OUTPUT Y output level: 1Vp-p (75Ω/ohms) C output level: 0.
E8701UD(EN).qx4 07.3.
E8701UD(EN).qx4 07.12.17 1:44 PM Page 36 TOKYO, JAPAN www.denon.com Printed in China 00D 511 4593 107 Denon Brand Company, D&M Holdings Inc.
