Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Bluetooth PIN (0000)
- Features
- Video conversion function
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Cable Types Used
- Connecting speakers
- Connecting a TV
- Connecting a playback device
- Connecting a set-top box (Satellite tuner/cable TV)
- Connecting a DVD player or Blu-ray Disc player
- Connecting a Blu-ray Disc player compatible with the Denon Link HD function
- Front Panel - Connecting a video camcorder or game console
- Connecting a turntable
- Connecting a device with a multi-channel output connector
- Connecting an iPod or USB memory device to the USB port
- Connecting an HD radio receiver
- Connecting to a home network (LAN)
- Connecting ZONE 2/ZONE 3
- Connecting an external control device
- Connecting the power cord
- Playback
- Basic operation
- Playing an iPod
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Listening to an HD Radio stations
- Listening to an HD Radio broadcast
- Tuning in by entering the frequency (Direct Tune)
- Changing the tune mode (Tune Mode)
- Selecting an audio program
- Tuning in to stations and presetting them automatically (Auto Preset Memory)
- Presetting the current broadcast station (Preset Memory)
- Listening to preset stations
- Specify a name for the preset broadcast station (Preset Name)
- Skipping preset broadcast stations (Preset Skip)
- Cancelling Preset Skip
- Checking the HD Radio reception information
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Viewing photographs on the Flickr site
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- AirPlay function
- Spotify Connect function
- Convenience functions
- Performing repeat playback
- Performing random playback
- Registering to Favorites
- Playing back content added to the “Save to Favorites”
- Deleting content added to favorites
- Searching content with keywords (Text Search)
- Playing back music and a favorite picture at the same time (Slideshow)
- Setting the Slideshow Interval
- Adjusting the audibility of dialog and vocals (Dialog Enhancer)
- Adjusting the volume of each channel to match the input source (Channel Level Adjust)
- Adjusting the tone (Tone)
- Displaying your desired video during audio playback (Video Select)
- Adjusting the picture quality for your viewing environment (Picture Mode)
- Playing the same music in all zones (All Zone Stereo)
- Selecting a sound mode
- HDMI control function
- Sleep timer function
- Quick select plus function
- Web control function
- Playback in ZONE 2/ZONE 3 (Separate room)
- Settings
- Appendix
- About HDMI
- Video conversion function
- Playing back a USB memory devices
- Playing back a Bluetooth device
- Playing back a file saved on a PC or NAS
- Playing back Internet Radio
- Personal memory plus function
- Last function memory
- Sound modes and channel output
- Sound modes and surround parameters
- Types of input signals, and corresponding sound modes
- Explanation of terms
- Trademark information
- Specifications
- Index
- Tips
- Troubleshooting
- Specs
- Index
- Spec Sheet
- Microphone Stand Assembly Instructions
- Scans of Supplied Microphone Stand
- Speaker Wire Labels
- Warranty
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 76
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 157
0
“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
259
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0
The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
337
0
Please re-install this unit in a place having good ventilation. －
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0
Check the speaker connections. The protection circuit may have been activated because speaker cable
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
36
0
Turn down the volume and turn on the power again. 78
0
This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center. －
The power to this unit does
not turn off when you press
the Power operation
button. “ZONE2 On” or
“ZONE3 On” appears on
the display.
0
Power in either ZONE2 or ZONE3 is on. To turn off the power of the device (standby), press either the
ZONE2 ON/OFF or ZONE3 ON/OFF button on the main unit, or press the POWER X button after
pressing the Z2 or Z3 button on the remote control to turn off the power of ZONE2 or ZONE3.
－
Contents Connections Playback Settings Tips Appendix
291
Front panel Display Rear panel Remote Index