Operation Manual

o
No video is shown on the TV
Symptom Cause / Solution Page
No picture appears.
0
Check the connections for all devices.
57
0
Insert connection cables all the way in.
－
0
Check that input connectors and output connectors are not reversely connected.
－
0
Check cables for damage.
－
0
Match the input settings to the input connector of the TV connected to this unit.
195
0
Check that the proper input source is selected.
78
0
Check the video input connector setting.
195
0
Check that the resolution of the player corresponds to that of the TV.
254
0
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
301
0
The HDMI signal cannot be converted to an analog signal. Use analog connections.
302
0
Use an “High Speed HDMI cable with Ethernet” or “High speed cable” that comes with the HDMI logo if
you wish to playback 4K (60/50 Hz) video.
－
No video is shown on the
TV with the DVI-D
connection.
0
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
301
No video from an input
source such as a game
console is shown on the
TV.
0
When special video signals are input from a game console, etc., the video conversion function may not
function. Connect the input connector to the monitor output connector of the same type.
－
Contents Connections Playback Settings Tips Appendix
287
Front panel Display Rear panel Remote Index