Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Table of Contents
- Panel Lock Function
- Video Comversion
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connection
- Speaker Installation / Placement
- Connecting Speakers
- Subwoofer
- About Cable Labels
- Speaker Configuration and Amp Assign Settings
- Bi-Amp Connection
- Multi-Zone Speakers
- TV
- Playback Devices
- USB Device
- Antennas
- Home Network
- Connecting an External Control Device
- Zone 2 / Zone 3 Connections
- Power Cord
- Playback
- Power On
- Selecting the Input Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- USB Device
- Bluetooth
- FM / AM Radio
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Getting the HEOS App
- AirPlay
- Spotify Connect
- Convenience Functions
- Adding to HEOS Favorites
- Playing back HEOS Favorites
- Deleting a HEOS Favorites
- Adjusting the Audibility of Dialog and Vocals (Dialog Enhancer)
- Adjusting the Volume of each Channelto Match the Input Source (Channel Level Adjust)
- Adjusting the Tone (Tone)
- Displaying your Desired Video During Audio Playback (Video Select)
- Adjusting the Picture Quality for your Viewing Environment (Picture Mode)
- Playing the Same Music in All Zones (All Zone Stereo)
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Quick Select Plus Function
- Panel Lock Function
- Remote Lock Function
- Web Control Function
- Playback in ZONE 2 / ZONE 3
- Settings
- About HDMI
- Relationship Between Video Signals and Monitor Output
- Personal Memory Plus
- Last Function Memory
- Sound Modes and Channel Output
- Sound Modes and Surround Parameters
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Quick Start Guide
- Microphone Stand Assembly Instructions
- Speaker Wire Labels
- IMAX DTS Firmware Update Information
- Spotify
- Warranty
TV Format
Set the video signal format to be output for the TV you are using.
o
Format
NTSC
(Default):
Select NTSC output.
PAL: Select PAL output.
0
“Format” can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same
time for at least 3 seconds.
“zVideo Format <NTSC>” appears on the display.
2.
Use the main unit’s o or p and set the video signal format.
3. Press the main unit’s ENTER to complete the setting.
NOTE
0
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Contents Connections Playback Settings Tips Appendix
204
Front panel Display Rear panel Remote Index