Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Table of Contents
- Panel Lock Function
- Video Comversion
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connection
- Speaker Installation / Placement
- Connecting Speakers
- Subwoofer
- About Cable Labels
- Speaker Configuration and Amp Assign Settings
- Bi-Amp Connection
- Multi-Zone Speakers
- TV
- Playback Devices
- USB Device
- Antennas
- Home Network
- Connecting an External Control Device
- Zone 2 / Zone 3 Connections
- Power Cord
- Playback
- Power On
- Selecting the Input Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- USB Device
- Bluetooth
- FM / AM Radio
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Getting the HEOS App
- AirPlay
- Spotify Connect
- Convenience Functions
- Adding to HEOS Favorites
- Playing back HEOS Favorites
- Deleting a HEOS Favorites
- Adjusting the Audibility of Dialog and Vocals (Dialog Enhancer)
- Adjusting the Volume of each Channelto Match the Input Source (Channel Level Adjust)
- Adjusting the Tone (Tone)
- Displaying your Desired Video During Audio Playback (Video Select)
- Adjusting the Picture Quality for your Viewing Environment (Picture Mode)
- Playing the Same Music in All Zones (All Zone Stereo)
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Quick Select Plus Function
- Panel Lock Function
- Remote Lock Function
- Web Control Function
- Playback in ZONE 2 / ZONE 3
- Settings
- About HDMI
- Relationship Between Video Signals and Monitor Output
- Personal Memory Plus
- Last Function Memory
- Sound Modes and Channel Output
- Sound Modes and Surround Parameters
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Quick Start Guide
- Microphone Stand Assembly Instructions
- Speaker Wire Labels
- IMAX DTS Firmware Update Information
- Spotify
- Warranty
0
The analog audio signal and the 2-channel PCM signal input from HDMI connector or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2.
0
If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set “HDMI Audio” to “PCM”. (v
p. 252)
2-channel PCM signals are output from a device connected to the input source selected for ZONE2 and can be played back in ZONE2.
In this case, the MAIN ZONE audio will also be converted to 2-channel PCM signals if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on
the playback device, the playback signal may not be converted to PCM even if this setting is configured.
0
The analog audio signal and the 2-channel PCM signal input from digital connectors (OPTICAL/COAXIAL) can be played back in ZONE3.
0
When “Component Video Out” in the menu is set to “ZONE2”, the component video output connector outputs the ZONE2 video. (v p. 201)
0
The menu screen is not output in ZONE2.
Contents Connections Playback Settings Tips Appendix
168
Front panel Display Rear panel Remote Index