User's Guide

Listening to an HD Radio station
1
Connect the antenna. (“Connecting an HD Radio
antenna” (v p. 85))
2
Press TUNER to switch the input source to “HD Radio”.
G TV screen H
.
OPTION
OPTION
STEREO
HD-AUTO
HD Radio
Now Playing
Tune Preset Option
CH 1
FM 92.10MHz
G Display of this unit H
.
01 FM 92.10MHz
3
Press OPTION.
The option menu screen is displayed.
4
Use ui to select “FM/AM”, then press ENTER.
This displays the reception band input screen.
5
Use o p to select “FM” or “AM”, then press ENTER.
FM: When listening to an FM broadcast.
AM: When listening to an AM broadcast.
6
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0
The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in
using buttons to change the frequency. The default setting is “Auto”. You can also
use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
Contents Connections Playback Settings Tips Appendix
106
Front panel Display Rear panel Remote Index