Operation Manual

Upgrade
Upgrade (Auro-3D)
The text marked with this symbol that will enable after the upgrade of the Auro-3D.
You can experience the best performance of Auro-3D if you install Front Height and Surround Height in addition to standard 5.1-channel. The “Setup
Assistant” will lead you to this setting.
You can use Rear Height speakers from a Dolby Atmos Enabled speaker setup instead of Surround Height speakers for Auro-3D playback.
This unit also can play Auro-3D using standard 5.1-channel and Front Height speakers. If you install any height speakers instead of Surround Height
speakers and Rear Height speakers, you can set the speaker configuration in setup menu.
Auro-3D (Europe only)
Features
High quality sound 12
Connecting speakers
Speaker installation 34, 37
Layout including height speakers and ceiling speakers 40
Speaker configuration and “Amp Assign” settings 46
Auro-3D 9.1/10.1-channel system 58, 64
Selecting a sound mode
Description of sound mode types Auro-3D sound mode 148
Sound mode that can be selected for each input signal 154
Audio
Auro-Matic 3D Preset 179
Auro-Matic 3D Strength 179
Manual Setup
Amp Assign 222, 225
Speaker Config. 230
Appendix
Sound modes and channel output 300
Sound mode and surround parameters 303
Types of input signals, and corresponding sound modes 307
Explanation of terms 310
Trademark information 320
Contents Connections Playback Settings Tips Appendix
7
Front panel Display Rear panel Remote Index