Operation Manual

Upgrade (Auro-3D)
Settings AUDIO OUT connectors
Height
Speakers
Dolby
Speakers
NOTE Layout Top Surr. Out HEIGHT1 HEIGHT2 SUBWOOFER2
SURROUND
BACK L
4ch None
z 1
Front Height & Surr. Height -
Front Height
Surround
Height
- -
Front Height & Rear Height z 5
- Rear Height - -
5ch None
z 4
Front Height & Surr. Height
SUBWOOFER 2
Front Height
Surround
Height
Top Surround -
SURR. BACK L - Top Surround
Front Height & Rear Height z 5
SUBWOOFER 2
Front Height Rear Height
Top Surround -
SURR. BACK L - Top Surround
z1
This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” in the menu.
z4
This can be selected when “Assign Mode” is set to “11.1ch” in the menu.
z5
For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
o
View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your “Amp Assign” setting on the menu screen.
Contents Connections Playback Settings Tips Appendix
225
Front panel Display Rear panel Remote Index