Operation Manual

o
Height
n
Height Sp
Select the number of the height speakers and ceiling speakers used in
MAIN ZONE.
None： Uses no height and ceiling speakers.
2ch
(Default)：
Uses a set of (two) height speakers or
ceiling speakers.
4ch：
Uses two sets of (four) height speakers or
ceiling speakers.
Upgrade (Auro-3D)
5ch：
Uses five height speakers
z
z
If “5ch” is selected, connect the Top Surround speaker to the SUBWOOFER 2
PREOUT or SURROUND BACK L speaker terminal.
n
Dolby Sp
Select the number of the Dolby Atmos Enabled speakers used in MAIN
ZONE.
None
(Default)：
Uses no Dolby Atmos Enabled speakers.
2ch：
Uses a set of (two) Dolby Atmos Enabled
speakers.
4ch：
Uses two sets of (four) Dolby Atmos
Enabled speakers.
Upgrade (Auro-3D)
o
Top Surr. Out
Select the terminal to connect to the Top Surround speaker.
SUBWOOFER 2
(Default)：
Connect the Top Surround speaker to the
SUBWOOFER 2 PRE OUT connector.
SURR. BACK L:
Connect the Top Surround speaker to the
SURROUND BACK L speaker terminal.
0
This can be selected when “Height Sp” is set to “5ch”. (v p. 222)
Contents Connections Playback Settings Tips Appendix
222
Front panel Display Rear panel Remote Index