Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Video Conversion Function
- Panel Lock Function
- Remote Lock Function
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connections
- Speaker Layout
- Speaker Connections
- Subwoofer
- Speaker Wire Labels
- Speaker Configuration and “Amp Assign” Settings
- External Power Amplifier Connection
- Connecting a TV
- Playback Devices
- USB Memory Device
- Antennas
- Home Network
- Zone 2 / Zone 3
- Remote Control Jacks
- Trigger Out Jacks
- Power Cord
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- USB Device
- Bluetooth Operation
- Tuner Operation
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Getting the HEOS App
- AirPlay Function
- Spotify Connect Function
- Convenience Functions
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Quick Select Plus Function
- Panel Lock Function
- Remote Lock Function
- Web Control Function
- Zone 2 / Zone 3
- Settings
- Remote Control Settings
- About HDMI
- Sound Modes and Channel Output
- Sound Modes and Surround Parameters
- Types of Input Signals, and Corresponding Sound Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Quick Start Guide
- Microphone Stand Assembly Instructions
- Speaker Wire Labels
- IMAX DTS Firmware Update Information
- Spotify Information
- Warranty
8
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
.
Continue
Place the microphone ear level of the listener seated at the 2nd
listening position, which should be no more than 2 ft (60 cm)
away from the 1st position, then select “Continue”...
Audyssey Setup
Back
Ear Height
n
Stopping Audyssey
®
Setup
A
Press BACK to display the popup screen.
B
Press o to select “Yes”, then press ENTER.
9
Repeat step 8, measuring positions 3 to 8.
0
To skip measuring the fourth and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 11.
10
Select “Continue”, then press ENTER.
.
Audyssey Setup
Continue
Repeat Last Test
Measurements complete.
Select “Continue” to analyze the data...
Start the analysis and storage of the measurement results.
0
Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
0
When the measurement results are being saved, make sure the power is
not turned off.
Contents Connections Playback Settings Tips Appendix
215
Front panel Display Rear panel Remote Index