Connections Playback Settings Tips .
Contents Connections Playback Settings 8 9 10 10 11 11 14 17 18 18 22 24 28 Upgrade Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Easy operation Part names and functions Front panel Display Rear panel Remote control unit Front panel Display Rear panel Appendix Connecting a playback device Connecting a set-top box (Satellite tuner/cable TV) Connecting a DVD player or Blu-ray Disc player Connecting a Blu-ray Disc player com
Contents Connections Playback Playing an iPod Listening to music on an iPod iPod Browse Mode settings Performing repeat playback Performing random playback Playing a USB memory device Playing files stored on USB memory devices Listening to music on a Bluetooth device Playing music from Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device Listening to FM/AM broadcasts Listening to FM/AM broadcasts Tuning in by entering the frequency (Direct Tune) Changing
Contents Connections Playback AirPlay function Playing songs from your iPhone, iPod touch or iPad Playing iTunes music with this unit Selecting multiple speakers (devices) Perform iTunes playback operations with the remote control unit of this unit Spotify Connect function Playing Spotify music with this unit Convenience functions Performing repeat playback Performing random playback Registering to Favorites Playing back content added to the “Save to Favorites” Deleting content added to favorites Searchi
Contents Connections Playback Settings Settings Front panel Inputs Input Assign Source Rename Hide Sources Source Level Input Select Speakers Audyssey® Setup Procedure for speaker settings (Audyssey® Setup) Error messages Retrieving Audyssey® Setup settings Manual Setup Amp Assign Speaker Config.
Contents Connections Playback 249 249 249 250 253 255 255 256 257 258 258 258 261 263 263 264 264 266 268 269 270 Network Information Connection Wi-Fi Setup Settings Network Control Friendly Name Diagnostics Maintenance Mode General Language ECO ZONE2 Setup/ZONE3 Setup Zone Rename Quick Select Names Trigger Out 1/Trigger Out 2 Front Display Firmware Information Usage Data Setup Lock Front panel Display Settings Rear panel Tips Appendix Operating external devices with the remote control unit Regist
Contents Connections Playback Settings Tips Tips 280 282 300 Tips Troubleshooting Resetting factory settings Appendix About HDMI Video conversion function Playing back a USB memory devices Playing back a Bluetooth device Playing back a file saved on a PC or NAS Playing back Internet Radio Personal memory plus function Last function memory Sound modes and channel output Sound modes and surround parameters Types of input signals, and corresponding sound modes Explanation of terms Trademark information
Contents Connections Playback Settings Tips Appendix Upgrade Upgrade (Auro-3D) Audio o Auro-3D Features High quality sound Speaker configuration and “Amp Assign” settings 47 Auro-3D 9.1-channel system 61 152 Sound mode that can be selected for each input signal 159 219 Amp Assign 235 Speaker Config.
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 2 Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features 0 Audyssey DSX® (v p. 197) High quality sound This unit is equipped with Audyssey DSX® processor. By connecting front height speakers to this unit and playing back with Audyssey DSX® processing you can experience a more vertically expansive front soundstage. By connecting two front wide speakers, you can experience a wider and more expanded front soundstage. 0 Audyssey LFC™ (Low Frequency Containment) (v p.
Contents Connections Playback Settings Tips 0 Denon’s unique high quality playback technology “Denon Link HD” (v p. 329) This unit is equipped with our exclusive “Denon Link HD” technology. When connected to a Denon disc player that has Denon Link HD, the sound localization becomes more precise, with increased detail and definition.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) 0 Auro-3D This unit is equipped with an Auro-3D decoder. With Auro-3D, Front Height (FHL+FHR) and Surround Height (SHL+SHR) are added to a conventional 5.1-channel system to achieve a natural and realistic sound field that is three-dimensional and fully immersive. After performing the Auro-3D upgrade you will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D.
Contents Connections Playback Settings Tips Appendix 0 Digital video processor upscales analog video signals (SD High performance resolution) to HD (720p/1080p) and 4K (v p. 211) 0 4K 60Hz input/output supported 4K Up scaling . Up to 1080p . This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution.
Contents Connections Playback Settings 0 HDMI connections enable connection to various digital AV Tips Appendix 0 The device is equipped with a AirPlay® function in addition to devices (8 inputs, 3 outputs) network functions such as Internet radio etc. (v p. 131) 8 3 Out . . In You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television.
Contents Connections Playback Settings 0 Wireless connection with Bluetooth devices can be carried out Tips Appendix 0 Multi-Room audio (v p. 145) easily (v p. 100) 【MAIN ZONE】 . 【ZONE2】/【ZONE3】 . You can select and play back the respective inputs in MAIN ZONE, ZONE2 and ZONE3. In addition, when the All Zone Stereo function is used, the music being played back in MAIN ZONE can be enjoyed in all the zones at the same time.
Contents Connections Playback Settings Tips Easy operation 0 “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. 0 Easy to use Graphical User Interface This unit is equipped with a Graphical User Interface for improved operability.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w e r t y .
Contents qw e r Connections Playback t Settings y Tips Appendix C SOURCE SELECT knob This selects the input source. (v p. 90) D Remote control sensor This receives signals from the remote control unit. (v p. 10) E Display This displays various pieces of information. (v p. 22) F MASTER VOLUME knob This adjusts the volume level. (v p. 91) G Door When you are using buttons and/or connectors behind the door, press the bottom of the door to open it.
Contents Connections Playback Settings With the door open q w e r t y u i o Tips Appendix E STATUS button Each press of this switches the status information that is shown on the display. Q0 F Information button (INFO) This displays the status information on the TV screen. (v p. 269) G Cursor buttons (uio p) These select items. H OPTION button This displays the option menu on the TV screen. I DIMMER button Each press of this switches the brightness of the display. (v p. 264) .
Contents Connections Playback Settings Tips Appendix N BACK button This returns to the previous screen. O ENTER button This determines the selection. . P SETUP button This displays the menu on the TV screen. (v p. 181) Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q AUX1 INPUT connector Used to connect analog output compatible devices such as video camcorders and game consoles. (v p. 78) Q8 K AUX1 HDMI connector This is used to connect HDMI output compatible devices such as video camcorders and game consoles. (v p.
Contents Connections Playback Settings Tips Appendix Display w e r Q2 E Monitor output indicator These light according to the HDMI monitor output setting. When set to “Auto(Dual)”, the indicators light according to connection status. C Audyssey® indicator This lights when “MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume”, “Audyssey DSX®” or “Audyssey LFCTM” has been set up. (v p.
Contents Connections Playback Settings . When playing HD Audio sources, the A indicator lights when a signal from an extension channel (a channel other than the front, center, surround, surround back, front height, front wide or LFE channel) is input. Q1 Q2 G Sleep timer indicator This lights when the sleep mode is selected. (v p. 164) H MUTE indicator This blinks while the sound is muted. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel .
Contents Connections Playback Settings . C Digital audio connectors (DIGITAL AUDIO) Used to connect devices equipped with digital audio connectors. 0 “Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel)” (v p. 72) 0 “Connection 3 : TV equipped without an HDMI connector” (v p. 73) 0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 75) 0 “Connecting a DVD player or Blu-ray Disc player” (v p.
Contents i o Playback Q0 Settings F Denon Link HD connector Used to connect a Denon Link HD compatible Blu-ray Disc player. (v p. 77) J NETWORK connector Used to connect to a LAN cable when connecting to a wired LAN network. (v p. 84) G SIGNAL GND terminal Used to connect a ground wire for the turntable. (v p. 79) Display Rear panel Appendix I HDMI connectors Used to connect devices equipped with HDMI connectors.
Contents Connections Playback Settings Tips Appendix O PRE OUT connectors Used to connect a subwoofer with built-in amplifier or an external power amplifier. 0 “Connecting the subwoofer” (v p. 43) 0 “Connecting ZONE” (v p. 171) . Q2 Q3 Q4 Q5 P Component video connectors (COMPONENT VIDEO) Used to connect devices equipped with component video connectors. 0 “Connection 3 : TV equipped without an HDMI connector” (v p. 73) 0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit q AVR CONTROL Z2 Z3 w r t y MAIN DEV. V. TV AVR DEVICE e A AVR operation buttons (AVR CONTROL MAIN, Z2, Z3) These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated through the remote control unit. 0 “Playback in ZONE2/ZONE3” (v p. 176) 0 “Menu operations” (v p.
Contents Connections Playback Settings AVR CONTROL POWER Z3 MAIN DEV. V. TV AVR DEVICE H Information button (INFO) This displays the status information on the TV screen. (v p. 269) TV MENU CB / CBL SAT DVD VD Blu-ray GAME MENU INPUT INP TV AUDIO AUX1 TUNER Bluetooth AUX2 PHONO iPo iPod/ USB MEDIA IA PLAYER ER CD ONLINE MUSIC INTERNET RADIO ADIO 1 2 I Cursor buttons (uio p) These select items. J BACK button This returns to the previous screen.
Connections Contents AVR CONTROL Z2 POWER Z3 MAIN DEV. V. TV TV MENU DVD VD Blu-ray GAME MEDIA IA PLAYER ER CD 1 2 MENU INPUT INP TV AUDIO AUX1 TUNER Bluetooth AUX2 PHONO ONLINE MUSIC QUICK SELECT 3 Q4 VOLUME MUTE INFO Q5 P ECO Mode button (G) This switches to ECO Mode. (v p. 258) Q VOLUME buttons (df) These adjust the volume level. 0 “Adjusting the volume” (v p. 91) 0 “Adjusting the volume (ZONE2/ZONE3)” (v p.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections 70 Connecting a playback device 74 Connecting an iPod or USB memory device to the USB port 80 Connecting an FM/AM antenna 82 Connecting to a home network (LAN) 84 Connecting an external control device 86 Connecting the power cord 88 Speaker cable . Connecting a TV Provide necessary cables according to the devices you want to connect. Subwoofer cable . 32 HDMI cable .
Contents Connections Playback Settings Tips Appendix Connecting speakers Install speakers and connect them to this unit. (“Speaker installation” (v p. 32), “Speaker connection” (v p. 42)) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. SL FWL FL FWR SW2 SR SW1 SB SBR .
Contents RHL Connections TRL TML TFL FHL TRR TMR TFR Playback Settings Tips Appendix Place the FRONT HEIGHT left and right speakers FHL/FHR directly above the front speakers. Mount them as (Front height speaker close to the ceiling as possible and aim them left/right): towards the main listening position.
Contents Connections Playback Settings Upgrade (Auro-3D) SHL/SHR (Surround height speaker left/right): FHL SHL FHR FL SHR FR SW C Front panel Display SR Rear panel 34 Remote Appendix Place the SURROUND HEIGHT left and right speakers directly above the surround speakers. .
Contents Connections FDL Playback Settings Tips About Dolby Atmos Enabled speakers Dolby Atmos Enabled speakers reflect the sound off the ceiling to allow the sound to come from over your head by using a special upwardpointing speaker that is placed on the floor. You can enjoy the Dolby Atmos 3D sound even in an environment where speakers cannot be installed on the ceiling. FDR SDL SDR BDR . BDL Place the FRONT Dolby Atmos Enabled speaker FDL/FDR on the front speaker.
Contents Connections Playback Settings Tips Appendix Height speakers layout DSX®, 0 This unit is compatible with Audyssey Dolby Atmos and DTS:X which offers an even wider and deeper surround sensation. When using Audyssey DSX®, install front wide speakers or front height speakers. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.
Contents Connections Playback Settings Tips Upgrade (Auro-3D) Appendix Height speakers layout FHL Surround height speaker Front height speaker Point slightly downwards FHR FL FR z1 C Surround speaker SL SR SHL Front speaker SHR GViewed from the sideH z1 30° - 45° . .
Contents Connections Playback Settings o When 7.1-channel speakers are installed using surround back speakers Tips o When 9.1-channel speakers are installed using front wide speakers FR FL C SW z1 z2 FWL z1 z3 z3 SL Listening position FWR z4 SR SL SR SBR SBL SBR . .
Contents Connections Playback Settings Tips o When 5.1-channel speakers are installed FL FR SW C z1 z2 SL .
Contents Connections Playback Settings o Layout including height speakers and ceiling speakers Tips Appendix n Ceiling speaker layout example Combination of 5.1-channel layout and top front/top rear speakers. n Height speaker layout example TRL TRR TFL Combination of 5.1-channel layout and front height/rear height speakers. TFR FL RHL RHR FHL SW FR C FHR FR C SR . SW .
Contents Connections Playback Settings n Dolby Atmos Enabled speaker layout example Tips Appendix Upgrade (Auro-3D) Combination of 5.1-channel layout and front Dolby/surround Dolby speakers. n Auro-3D layout example Combination of 5.1-channel speakers with Front Height/Surround Height speakers. FDL SDL FL SW FDR C SL SDR FR FHL SHL SR FHR FL SW C . .
Contents Connections Playback Settings Speaker connection Tips Appendix NOTE 0 Carry out the following settings when using a speaker with an impedance of 4 – 6 Ω/ohms. Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. 1. Press and hold the main unit’s o and p at the same time for at least 3 seconds. “zVideo Format ” appears on the display. 2. Press i on the main unit twice. NOTE “zSp.
Contents Connections Playback Settings Appendix o Connecting the subwoofer o Connecting the speaker cables Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker Config.” setting. (v p. 237) The level and distance can be set separately for Subwoofer 1 and Subwoofer 2.
Contents Connections Playback Settings o About the cable label (supplied) for channel identification Speaker terminals FRONT L FRONT R CENTER SURROUND L SURROUND R SURROUND BACK L SURROUND BACK R FRONT WIDE L FRONT WIDE R FRONT HEIGHT L FRONT HEIGHT R TOP FRONT L TOP FRONT R TOP MIDDLE L TOP MIDDLE R TOP REAR L TOP REAR R REAR HEIGHT L REAR HEIGHT R FRONT DOLBY L FRONT DOLBY R SURROUND DOLBY L SURROUND DOLBY R BACK DOLBY L BACK DOLBY R SUBWOOFER The channel display section for speaker terminals on the
Contents Connections Playback Settings Tips Attach the cable label for each channel to its speaker cable as shown in the diagram. Refer to the table and attach the label to each speaker cable. Then, make connection so that the color of the speaker terminal matches that of the cable label. G How to attach the cable label H Speaker .
Contents Connections Playback Settings Tips Appendix Speaker configuration and “Amp Assign” settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback. (v p.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) 0 In addition to the connections described in p.48 - 69, this unit allows for various speaker connections with the “Amp Assign” setting. Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign” setting screen, which shows how to make connections in your environment. Refer to the example connection for “Example connection for the Auro-3D 9.1-channel system” (v p. 61) when playing Auro-3D with a 9.
Contents Connections Playback Settings Tips Appendix o 5.1-channel playback This serves as a basic 5.1-channel surround system. FL FR SW C SL SW FR FL C SR SL . .
Contents Connections Playback Settings Tips Appendix o 7.1-channel playback System for 7.1-channel surround playback. You can connect speakers for up to 11-channels for MAIN ZONE. When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode. n Example connections when using surround back speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers.
Contents Connections Playback Settings Tips Appendix n Example connections when using front wide speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front wide speakers. FL FWL FR SW C SL FWR SW FR FL C SR SL . . SR 0 Set “Floor” - “Layout” to “5ch & SB & FW” or “5ch & FW” in the menu when connecting in this configuration. (v p.
Contents Connections Playback Settings Tips Appendix n Example connections when using ceiling speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with ceiling speakers. TML TMR FL SL FR SW C SR FR FL C SR SL TMR TML . . SW 0 Set “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) 0 The top front or top rear speakers can be connected instead of the top middle speakers.
Contents Connections Playback Settings Tips Appendix SL FHR n Example connections when using height speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. FHL FHR FL FR SW C SL SR FR FL C SR FHL . . SW 0 Set “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) 0 The rear height speakers can be connected instead of the front height speakers.
Contents Connections Playback Settings Tips Appendix n Example connections when using Dolby Atmos Enabled speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front Dolby speakers. FDL FL SW FDR C FR SR SW FR FL C SR SL FDR FDL . . SL 0 Set “Dolby Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) 0 The surround Dolby speakers can be connected instead of the front Dolby speakers.
Contents Connections Playback Settings Tips Appendix o 9.1-channel playback System for 9.1-channel surround playback. You can connect speakers for up to 13-channels for MAIN ZONE by using an external power amplifier. When you connect speakers for 10 or more channels, the output speakers automatically switch according to the input signal and sound mode. n Example connection when using surround back and front wide speakers SBR FL FWL SBL FR SW C SL Power amplifier FWR SR SBR . .
Contents Connections Playback Settings Tips Appendix n Example connection when using one set of ceiling speakers HEIGHT 1 z TML FL SL TMR TML TMR FR SW C SBL Power amplifier SR . SBR . 0 Set “Height” - “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) SW FR FL C SR SL SBR SBL z The top front or top rear speakers can be connected instead of the top middle speakers.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of ceiling speakers TRL TFL TRR TFR FL FR SW C TRL Power amplifier SR . SL HEIGHT 2 z TRR 0 Set “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p. 233) FR FL C SR SL TFR TFL HEIGHT 1 z . SW z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using one set of height speakers HEIGHT 1 z FHL FL SL FHR FHR FHL FR SW C SBL Power amplifier SR . SBR . 0 Set “Height” - “Height Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) SW FR FL C SR SL SBR SBL z The rear height speakers can be connected instead of the front height speakers. In this case, set the height speakers to be connected under “Height” - “Layout” in the menu.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of height speakers HEIGHT 2 z RHL FHL FHR FL RHR RHL FR SW C Power amplifier SR . SL RHR 0 Set “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p. 233) FR FL C SR SL FHR FHL HEIGHT 1 z . SW z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p.
Contents Connections Playback Settings Tips Appendix n Example connection when using one set of Dolby Atmos Enabled speakers HEIGHT 1 z FDR FDL SL FL SW FDR C SBL FR FDL Power amplifier SR . SBR . 0 Set “Height” - “Dolby Sp” to “2ch” in the menu when connecting in this configuration. (v p. 233) SW FR FL C SR SL SBR SBL z The surround Dolby speakers can be connected instead of the front Dolby speakers.
Contents Connections Playback Settings Tips Appendix n Example connection when using two sets of Dolby Atmos Enabled speakers HEIGHT 2 z SDR SDL FDL SDL FL SW FDR C SR . SL Power amplifier SDR FR 0 Set “Dolby Sp” to “4ch” in the menu when connecting in this configuration. (v p. 233) FR FL C SR SL SBR . SW SBL FDR FDL HEIGHT 1 z z You can change the combination of the HEIGHT1 and HEIGHT2 channels in the settings. (v p.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) n Example connection for the Auro-3D 9.1-channel system This speaker configuration is optimized for Auro-3D playback. HEIGHT 2 z FHL FHR FL FR SHL SHR SW C SR Power amplifier . SL SHR SHL FR FL C SR SL 0 Set “Floor” - “Layout” to “5ch” or set “5ch & SB” and “Height Sp” to “4ch” in the menu when connecting in this configuration. (v p. 235) Next, set “Height” - “Layout” to “Front Height & Surr. Height”. (v p.
Contents Connections Playback Settings Tips Appendix z The combination of the HEIGHT1 and HEIGHT2 channels can be changed to the following patterns according to the speaker system being used. Set this from “Amp Assign” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) Combination of height speakers to be used Number of height/ ceiling speakers Number of Dolby Speakers 4 speakers None Connected terminals Combination pattern HEIGHT1 SPEAKER HEIGHT2 PRE OUT Front Height & Surr. Height Front Height Surround Height Front Height & Rear Height z Front Height Rear Height z You can use the Rear Height speakers instead of Surround Height speakers for Auro-3D playback.
Contents Connections Playback Settings Tips Appendix n 5.1-channel (bi-amp connection of front speakers) This system plays back 5.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification.
Contents Connections Playback Settings Tips Appendix n 7.1-channel + speakers used exclusively for 2-channel playback You can connect speakers used exclusively for 2-channel playback, which are used for the direct and stereo modes, and speakers used exclusively for 7.1 multi-channel playback. The speakers used exclusively for multi-channel playback and the speakers used exclusively for 2-channel playback are automatically switched for playback in accordance with the sound mode.
Contents Connections Playback Settings Tips Appendix n 5.1-channel + front speakers of second unit This system enables switching playback between front speakers A and B as desired. FL FL (B) (A) SW FR FR (A) (B) C SL SR FR (A) FL (A) C SR SL . .
Contents Connections Playback Settings Tips Appendix n 5.1-channel (MAIN ZONE) + 2-channel (ZONE2 or ZONE3) This type of configuration plays back 5.1-channels in MAIN ZONE and 2-channels in ZONE2. (Speakers can output audio from ZONE3 instead of ZONE2 (Assign Mode: 5.1ch + ZONE3).) MAIN ZONE FL SW FR C SL SR SW FR FL C SR SL . ZONE2 R ZONE2 ZONE2 R .
Contents Connections Playback Settings Tips Appendix n 5.1-channel (MAIN ZONE) + 1-channel (ZONE2) + 1-channel (ZONE3) This type of configuration plays back 5.1-channels in MAIN ZONE and 1-channel (monaural) in ZONE2 and ZONE3. MAIN ZONE FL FR SW C SL SW SR FR FL C SR SL . ZONE3 Mono ZONE2 ZONE3 ZONE3 Mono .
Contents Connections Playback Settings Tips Appendix o Connecting an external power amplifier You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. Select the terminal to use and connect the device.
Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 205) TV . HDMI IN (ARC) 0 When using the HDMI control function, connect to the HDMI MONITOR 1 connector.
Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV IN OPTICAL OUT HDMI IN .
Contents Connections Playback Settings Tips Connection 3 : TV equipped without an HDMI connector Use a component video or a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV OUT OPTICAL OUT IN VIDEO IN COMPONENT VIDEO IN Y PB PR .
Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Contents Connections Playback Settings Tips Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Satellite tuner/ Cable TV AUDIO COAXIAL OUT Satellite tuner/ Cable TV VIDEO AUDIO OUT R L R VIDEO OUT COMPONENT VIDEO OUT Y PB PR HDMI OUT L or or L .
Contents Connections Playback Settings Tips Appendix Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray Disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) DVD player AUDIO COAXIAL OUT VIDEO AUDIO OUT R L R VIDEO OUT COMPONENT VIDEO OUT Y PB PR Blu-ray Disc player DVD player HDMI OUT HDMI OUT L or or L .
Contents Connections Playback Settings Tips Appendix Connecting a Blu-ray Disc player compatible with the Denon Link HD function By making a Denon Link HD connection to a player compatible with the Denon Link HD function, you can enjoy higher quality playback compared with when only the HDMI connector connection is made. Blu-ray Disc player Denon Link HD HDMI OUT 0 Both HDMI and Denon Link HD connections are required for this connection method. 0 Set “Input Mode” on the menu to “Auto” or “HDMI”.
Contents Connections Playback Settings Tips Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. Video camcorder .
Contents Connections Playback Settings Tips Appendix Connecting a turntable This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit’s input source to “Phono” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers.
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” (v p. 92) or “Playing a USB memory device” (v p. 97). iPod USB memory device . or 0 Denon does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips o Supported iPod/iPhone models • iPod classic • iPod nano • iPod touch .
Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” (v p. 105)) AM loop antenna (supplied) 0 If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit.
Contents Connections Playback Settings Tips o AM loop antenna assembly o Using the AM loop antenna 1 Suspending on a wall Suspend directly on a wall without assembling. 2 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Insert the projecting part into the square hole in the stand. Stand Square hole . Nail, tack, etc. Loop antenna Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. .
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Contents Connections Playback Settings Wireless LAN Tips Appendix 0 When using this unit, we recommend you use a router equipped with the following functions: When connecting to the network via wireless LAN, connect the external antennas for Bluetooth/wireless connectivity connection to the rear panel and stand them upright. See “Wi-Fi Setup” on how to connect to a wireless LAN router. (v p.
Contents Connections Playback Settings Tips Appendix Connecting an external control device REMOTE CONTROL jacks When this unit is installed in a location where the remote control signals cannot reach (installation in a cabinet etc.), it can still be controlled by the remote control by connecting a remote control receiver unit (sold separately). You can also use it to remotely control ZONE2 and ZONE3 (separate room). Infrared retransmitter AUX OUT Input Infrared sensor Output .
Contents Connections Playback Settings Tips Appendix TRIGGER OUT jacks When a device with TRIGGER IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The TRIGGER OUT jack outputs a maximum 12 V DC /150 mA electrical signal. . 12 V DC/150 mA trigger-compatible device NOTE 0 Use a monaural mini-plug cable for connecting the TRIGGER OUT jacks. Do not use a stereo mini-plug cable.
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord (supplied) .
Contents Connections Playback Settings o Contents Tips Appendix Playback network audio/service Basic operation Turning the power on 90 Selecting the input source 90 Adjusting the volume 91 Turning off the sound temporarily (Muting) 91 Selecting a sound mode 146 Listening to Internet Radio 113 Playing back files stored on a PC and NAS 117 Listening to Pandora® 121 Listening to SiriusXM Internet Radio 128 AirPlay function 131 Spotify Connect function 134 Convenience functions Pl
Contents Connections Playback Settings Tips Appendix Basic operation AVR CONTROL Z 2 POWER Z3 MAIN DEV. V. TV 1 AVR DEVICE TV MENU Input source select buttons Turning the power on POWER X Press POWER X to turn on power to the unit.
Contents Connections Playback Settings Adjusting the volume 1 Use VOLUME df to adjust the volume. The following describes the procedure for playing DVD player/Blu-ray Disc player. 1 2 3 Turning off the sound temporarily (Muting) 4 Press MUTE :. 0 MUTE indicator on the display flashes. Prepare for playback. A Turn on the power of the TV, subwoofer and player. B Change the TV input to the input of this unit. Press POWER X to turn on power to the unit.
Contents Connections Playback Settings Tips Appendix Playing an iPod 0 You can use the USB cable provided with the iPod to connect the iPod AVR CONTROL Z2 with the unit’s USB port and enjoy music stored on the iPod. POWER Z3 0 For information on the iPod models that can be played back with this MAIN DEV. V. TV unit, see “Supported iPod/iPhone models” (v p. 81). AVR DEVICE 0 See “AirPlay function” (v p.
Contents Connections Playback Settings This can be operated when the “iPod Browse Mode” is set to “From iPod”. (v p. 94) 0 “iPod Browse Mode settings” (v p. 94) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 141) 0 “Adjusting the tone (Tone)” (v p. 142) 0 “Displaying your desired video during audio playback (Video Select)” (v p. 143) 0 “Adjusting the picture quality for your viewing environment (Picture Mode)” (v p.
Contents Connections Playback Settings iPod Browse Mode settings Operation buttons In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. 1 2 3 Press OPTION when the input source is “iPod/USB”. The option menu screen is displayed.
Contents Connections Playback Settings Tips o Operations accessible through the option menu This can be operated when the “iPod Browse Mode” is set to “OnScreen”. (v p. 94) 0 “iPod Browse Mode settings” (v p. 94) 0 “Performing repeat playback” (v p. 96) 0 “Performing random playback” (v p. 96) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 141) 0 “Adjusting the tone (Tone)” (v p.
Contents Connections Playback Settings 1 Press OPTION with “iPod Browse Mode” set to “OnScreen”. 4 2 3 Use ui to select “Repeat”, then press ENTER. Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled. One: A file being played is played repeatedly. All: All files in the folder currently being played are played repeatedly. Press OPTION with “iPod Browse Mode” set to “OnScreen”. The option menu screen is displayed. The option menu screen is displayed.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music or viewing still picture (JPEG) files stored on a USB AVR CONTROL Z2 memory device. POWER Z3 0 Only USB memory devices conforming to mass storage class standards MAIN DEV. V. TV can be played on this unit. AVR DEVICE 0 This unit is compatible with USB memory devices in “FAT16” or “FAT32” format.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 2 Tips Operation buttons Appendix Function 1 Playback 3 Pause Connect the USB memory device to the USB port. (v p. 80) 2 Stop 89 Skip to previous track / Skip to next track Press iPod/USB to switch the input source to “iPod/ USB”.
Contents Connections Playback Settings Tips o Operations accessible through the option menu 0 “Performing repeat playback” (v p. 136) 0 “Performing random playback” (v p. 136) 0 “Searching content with keywords (Text Search)” (v p. 138) 0 “Playing back music and a favorite picture at the same time (Slideshow)” (v p. 139) 0 “Setting the Slideshow Interval” (v p. 140) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device AVR CONTROL Z2 Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 32.8 ft/10 m. POWER Z3 MAIN DEV. V.
Contents Connections Playback Settings Playing music from Bluetooth device 3 4 In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 2 A Connect the supplied external antennas for Bluetooth/wireless connectivity to the Bluetooth/wireless LAN antenna connectors on the rear panel. (v p. 25) B Press POWER X to turn on power to the unit.
Contents Connections Operation buttons Playback Function 1 Playback 3 Pause 2 Stop 89 Skip to previous track / Skip to next track 67 (Press and hold) Fast-reverse / Fastforward ENTER Settings Appendix NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
Contents Connections Playback Settings Pairing with other Bluetooth devices 3 4 5 Activate the Bluetooth settings on your mobile device. Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode. Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
Contents Connections Playback Settings Tips Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. 1 2 3 4 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts AVR CONTROL Z2 You can use the built-in tuner of this unit to listen to FM broadcasts and AM broadcasts. Make sure the FM antenna and AM loop antenna are connected to this unit first. POWER Z3 MAIN DEV. V.
Contents Connections Playback Settings Listening to FM/AM broadcasts 1 2 5 Connect the antenna. (“Connecting an FM/AM antenna” (v p. 82)) 6 Press TUNER to switch the input source to “Tuner”. G TV screen H STEREO OPTION Option . 92.10MHz . 01 FM 4 When listening to an FM broadcast. AM: When listening to an AM broadcast. Press TUNE + or TUNE - to select the station you want listen to.
Contents Connections Playback Settings o Operations accessible through the option menu You can enter the receiving frequency directly to tune in. 0 “Changing the tune mode (Tune Mode)” (v p. 108) 0 “Tuning in to stations and presetting them automatically (Auto Preset 1 Memory)” (v p. 108) 0 “Presetting the current broadcast station (Preset Memory)” (v p. 109) 2 0 “Specify a name for the preset broadcast station (Preset 0 0 0 0 Name)” (v p.
Contents Connections Playback Settings Changing the tune mode (Tune Mode) 2 3 A maximum of 56 radio stations can be automatically preset. Press OPTION when the input source is “Tuner”. 1 The option menu screen is displayed. Use ui to select “Tune Mode”, then press ENTER. 2 Use o p to select the tune mode, then press ENTER. Auto: Automatically search for and tune to a receivable radio station. Manual: Manually change the frequency one step at a time each time the button is pressed.
Contents Connections Playback Settings Presetting the current broadcast station (Preset Memory) 2 3 4 Appendix Channel Default settings 1–8 92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10 MHz 9 – 16 94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70 MHz 17 – 24 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” (v p. 106)) 98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 / 100.30 MHz 25 – 32 100.50 / 100.70 / 100.90 / 101.
Contents Connections Playback Settings Specify a name for the preset broadcast station (Preset Name) 5 You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 2 3 4 6 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. Tips Use ui to select a name label, then press ENTER. The screen that lets you edit the Preset Name is displayed. 0 If you select “Set Defaults”, then the unit returns to displaying the frequency.
Contents Connections Playback Settings Skipping preset broadcast stations (Preset Skip) 2 3 A Use o p to select the group of broadcast stations you want to skip. B Use ui to select the broadcast station you want to skip. C Use o p to select “Skip”. The station you selected is not displayed. Press OPTION when the input source is “Tuner”. 4 The option menu screen is displayed. Press OPTION to return to the previous screen. Use ui to select “Preset Skip”, then press ENTER.
Contents Connections Playback Settings Tips Cancelling Preset Skip 1 2 3 While the “Preset Skip” screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. Use ui to select a broadcast station to cancel the skip for. Use o p to select “On”. The skip is cancelled. NOTE 0 “Preset Skip” cannot be cancelled for groups.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 Internet Radio refers to radio broadcasts distributed over the Internet. AVR CONTROL Z2 TV by vTuner radio station.
Contents Connections Playback Settings Listening to Internet Radio 1 4 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 84)) 2 Press ONLINE MUSIC. 0 You can also press INTERNET RADIO to select the input source “Internet Radio” directly. Use uio p to select “Internet Radio”, then press ENTER.
Contents 5 Connections Playback Settings Operation buttons Function Playback 2 Stop ENTER (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display Appendix Playing the last played Internet Radio station Use ui p to select the station, then press ENTER. Playback starts once buffering reaches “100%”. 1 Tips 1 Press INTERNET RADIO. The source switches to “Internet Radio” and the last played radio station plays.
Contents Connections Playback Settings Using vTuner to add Internet Radio stations to favorites 4 5 There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet Radio station search website specifically designed for this unit.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS 0 This unit can play back music files and playlists (m3u, wpl) stored on a AVR CONTROL Z2 PC and on Network Attached Storage (NAS) that supports DLNA. POWER Z3 0 The network audio playback function of this unit connects to the server MAIN DEV. V. TV using technologies shown below.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. . o When using Windows Media Player 11 o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 2 3 4 5 1 2 3 Start up Windows Media Player 12 on the PC. Select “More streaming options...” in the “Stream”.
Contents Connections Playback Settings Playing back files stored on a PC and NAS 4 5 Use this procedure to play music files, image files or playlists. 2 3 Prepare for playback. Use iu p to select the file, then press ENTER. Playback starts once buffering reaches “100%”. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 84)) B Prepare the computer. (vComputer’s operating instructions) Operation buttons Press ONLINE MUSIC.
Contents Connections Playback Settings Appendix o Operations accessible through the option menu 0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. 0 If you use Ver.11 or later of Windows Media Player, the album art for WMA files can be displayed.
Contents Connections Playback Settings Tips Appendix Listening to Pandora® AVR CONTROL Z2 Pandora is an automated music recommendation and Internet Radio service created by the Music Genome Project. To listen to Pandora you will need a free Pandora account. If you do not have a Pandora account, you can create one at www.pandora.com or from the Pandora smartphone application. Playback of Pandora in this unit requires the Pandora account to be linked to the unit. Therefore, access http://www.pandora.
Contents Connections Playback Settings 4 Listening to Pandora® 1 Appendix If you have a Pandora account, use ui to select “I have a Pandora account”, then press ENTER. 0 If you do not have a Pandora account, to select “I am to new to Prepare for playback. Pandora”, then press ENTER. The URL of Pandora and activation code are displayed. Access the Pandora web page from your PC and register the displayed activation code and account information. Then press ENTER.
Contents 5 Connections Playback Settings Tips Input “Email address” and “Password”. 0 For character input, see “Using the keyboard screen” (v p. 183). 0 Press BACK to cancel the input. When “Cancel input?” is displayed, select “Yes”, then press ENTER. After inputting the “Email address” and “Password”, select “OK”, then press ENTER. If the “Email address” and “Password” match, the top menu for Pandora is displayed. My Station [1/4] New Station Shuffle Music1 Radio Sign Out OPTION Option .
Contents Connections Playback Settings Creating a new station Operation buttons You can create up to 100 radio stations. 1 2 Use ui to select “New Station”, then press ENTER. Input a track or artist name, then press “OK”. Use ui to select “Search by Artist” or “Search by Track”, then press ENTER.
Contents Connections Playback Settings Tips Listening to an existing station 1 Use ui and select the radio station that you want to listen to, then press ENTER. 0 You can skip up to 6 tracks that are being played back within 1 hour. Listening to created radio stations at random 1 Use ui to select “Shuffle”, then press ENTER. Created radio stations are selected at random, and tracks are streamed.
Contents Connections Playback Settings Giving feedback and managing stations Press p while a track is playing. The Pandora menu screen is displayed. I like this track : Press when you like the track that is being played. Playback a favorite track. Display the E (Thumbs up) icon. I don’t like this track : Press when you don’t like the track that is being played. Delete that track from the radio station. Display the D (Thumbs down) icon.
Contents Connections Playback Settings Tips Sign Out Disassociate this unit from your Pandora account. 1 2 Use ui to select “Sign Out”, then press ENTER. When the popup menu appears, use o p to select “Yes”, then press ENTER. o Operations accessible through the option menu 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 141) 0 “Adjusting the tone (Tone)” (v p. 142) 0 “Displaying your desired video during audio playback (Video Select)” (v p.
Contents Connections Playback Settings Tips Appendix Listening to SiriusXM Internet Radio AVR CONTROL Z2 You can access SiriusXM to enjoy access to a wide range of unique content. An All Access package lets you listen to SiriusXM on your computer, smartphone, tablet or Lynx Portable. For details, see the SiriusXM homepage. http://www.siriusxm.com POWER Z3 MAIN DEV. V.
Contents Connections Playback Settings Listening to SiriusXM Internet Radio 3 Over 155 channels commercial-free music, plus play-by-play sports, exclusive talk, comedy and entertainment. 2 Appendix Use uio p to select “SiriusXM”, then press ENTER. Online Music Prepare for playback. Favorites A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” (v p. 84)) B Access the following website from your PC and obtain a SiriusXM account. http://www.
Contents 7 8 Connections Playback Settings Disassociate this unit from your SiriusXM account. Use ui to select the file, then press ENTER. 1 2 The selected file is displayed. Function 1 Playback 2 Stop ENTER CH/PAGE d f Appendix Sign Out Use ui to select the genre, then press ENTER. Operation buttons Tips Playback Use ui to select “Sign Out”, then press ENTER. When the popup menu appears, use o p to select “Yes”, then press ENTER.
Contents Connections Playback Settings Tips Appendix AirPlay function 0 0 0 0 0 0 . Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. PC Router + is displayed on the menu screen while AirPlay is being operated. Source input will be switched to “Online Music” when AirPlay playback is started. You can stop AirPlay playback by pressing o or choosing other input source. To see song and artist names together, press STATUS on the main unit.
Contents Connections Playback Settings Playing songs from your iPhone, iPod touch or iPad 1 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Turn this unit ON. Set “Network Control” to “Always On” for this unit. (v p. 255) NOTE Play the song on your iPhone, iPod touch or iPad.
Contents Connections Playback Settings Selecting multiple speakers (devices) Appendix Perform iTunes playback operations with the remote control unit of this unit It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Tips With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. Click the AirPlay icon ' and select “Multiple”. 1 2 3 Check the speakers you want to use.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. For information on how to set up and use Spotify Connect please visit www.spotify.
Contents Connections Playback Settings Tips Appendix Convenience functions 0 This section explains how to use convenient functions that can be used AVR CONTROL Z2 for each input source. POWER Z3 0 These functions can only be set in the MAIN ZONE. MAIN DEV. V.
Contents Connections Playback Settings Tips Performing random playback Performing repeat playback n Supported input sources: USB / Media Server / Bluetooth n Supported input sources : USB / Media Server / Bluetooth 1 1 2 3 While content is playing, press OPTION. The option menu screen is displayed. 4 2 3 Use ui to select “Repeat”, then press ENTER. Use o p to select repeat playback mode. Off (Default): Appendix Repeat playback mode is canceled.
Contents Connections Playback Settings Registering to Favorites n Supported input sources : Internet Radio / Media Server / Pandora / SiriusXM 1 2 While content is playing, press OPTION. Press ONLINE MUSIC. Use uio p to select “Favorites”, then press ENTER. The option menu screen is displayed. Online Music Use ui to select “Save to Favorites”, then press ENTER. Favorites Internet Radio Media Server “Favorite added” is displayed, and the current content is added to favorites.
Contents Connections Playback Settings Deleting content added to favorites 1 2 3 Appendix Searching content with keywords (Text Search) Press ONLINE MUSIC. Use uio p to select “Favorites”, then press ENTER. n Supported input sources : USB / Internet Radio / Media Server Use ui to select the content you want to delete from favorites, then press OPTION. 1 The option menu screen is displayed. 4 Tips 2 Use ui to select “Remove from Favorites”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB n Supported input sources : Internet Radio / Media Server 1 1 Play back a still picture. 0 Playing back still pictures stored on USB memory devices. (v p. 97) 2 3 4 2 Play back a music file. (v p. 97) 0 Play back still pictures stored on Media Server. (v p. 117) Play back a music file of Media Server or Internet Radio station.
Contents Connections Playback Settings Setting the Slideshow Interval Tips 0 The “Slideshow Interval” settings are reflected for all input sources. Set the playback interval when playing back a slideshow of still picture (JPEG) files stored on a USB memory device or media server. n Supported input sources: USB / Media Server 1 2 3 4 While the list is displayed, press OPTION. The option menu screen is displayed. Use ui to select “Slideshow Interval”, then press ENTER.
Contents Connections Playback Settings Adjusting the volume of each channel to match the input source (Channel Level Adjust) 2 Press OPTION. The option menu screen is displayed. Use ui to select “Channel Level Adjust”, then press ENTER. The “Channel Level Adjust” screen is displayed. 3 4 Use ui to select the channel that you wish to adjust. Use o p to adjust the volume. –12.0 dB – +12.0 dB (Default : 0.0 dB) 5 Use uio p to select “Exit”, then press ENTER.
Contents Connections Playback Settings Adjusting the tone (Tone) 4 Adjusts the tonal quality of the sound. 1 2 3 Press OPTION. The option menu screen is displayed. 5 Use ui to select “Tone”, then press ENTER. The “Tone” screen is displayed. Tips Appendix Select “On” in step 3 and press i to select the sound range to be adjusted. Bass: Adjust bass. Treble: Adjust treble. Use o p to adjust the tone, then press ENTER.
Contents Connections Playback Settings Displaying your desired video during audio playback (Video Select) 4 5 This unit can display video from a different source on TV during audio playback. You can set this for each input source. n Supported input sources: iPod/USB / CDz / Tuner / Online Music / Bluetooth / Phono Tips If you selected “On” in step 3, press i and select “Source”. Use o p to select the input source for video you want to play back, then press ENTER.
Contents Connections Playback Settings Adjusting the picture quality for your viewing environment (Picture Mode) 3 n Supported input sources : CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / iPod/USB / Online Music / CDz / TV Audioz z You can set the picture mode when an HDMI, component video or video connector is assigned. 1 2 Press OPTION during video playback. The option menu screen is displayed. Use ui to select “Picture Mode”, then press ENTER.
Contents Connections Playback Settings 1 You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 and ZONE3 (separate rooms). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. 2 3 Appendix o Stopping the All Zone Stereo mode Playing the same music in all zones (All Zone Stereo) 1 Tips During playback in All Zone Stereo mode, press OPTION.
Contents Connections Playback Settings Tips Appendix Selecting a sound mode AVR CONTROL Z2 This unit allows you to enjoy various kinds of surround and stereo playback modes. Disc formats such as Blu-ray Disc and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services. This unit supports playback of almost all of these multi-channel audio formats.
Contents Connections Playback Settings Appendix o Switching the sound mode Selecting a sound mode 1 Tips 0 Press MOVIE, MUSIC or GAME to display a list of the sound modes that can be selected. Each time you press MOVIE, MUSIC or GAME, the sound mode changes. 0 While the list is displayed, you can also use ui to select a sound mode. 0 Try out various sound modes and enjoy sound mode in your favorite mode. GExampleH When MOVIE is pressed Press MOVIE, MUSIC or GAME to select a sound mode.
Contents Connections Playback Settings Appendix Pure Direct playback Direct playback This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display and analog video circuit. Doing so suppresses noise sources that affect sound quality. Sound recorded in source is played as is. 1 Tips Press PURE to select “Direct”. Direct playback begins. 1 0 While DSD signals are played back, “DSD Direct” is displayed.
Contents Connections Playback Settings Tips Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. Auto surround playback begins.
Contents Connections Playback Settings Tips Appendix o Description of sound mode types Dolby sound mode Sound mode type Description Dolby Surround This mode uses Dolby Surround Upmixer to extend various sources to natural and realistic multi channels for playback. Use ceiling speakers such as top middle speakers to realize a three-dimensional sound field. Dolby Digital This mode can be selected when playing sources recorded in Dolby Digital.
Contents Connections Playback Settings Tips Appendix DTS sound mode Sound mode type Description DTS Surround This mode can be selected when playing sources recorded in DTS. DTS ES Dscrt6.1z This mode is suitable for playing discs recorded in DTS-ES. The surround back channel added using the discrete method is played as an independent channel. Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced. DTS ES Mtrx6.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) Auro-3D sound mode Sound mode type Description Auro-3D This mode uses an Auro-3D decoder to create three-dimensional audio output using the Height Channel. It is ideal for playback of signals encoded as Auro-3D with a Height Channel. If signals not encoded as Auro-3D are input, an Upmixer called the Auro-Matic is used to create highly realistic three-dimensional audio output.
Contents Connections Playback Settings Tips Appendix PCM multi-channel sound mode Sound mode type Multi Ch In Audyssey Description This mode can be selected when playing multi-channel PCM/DSD sources. DSX® sound mode Sound mode type Audyssey DSX® (A-DSX)z Description This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front height channels, the surround sound effects sound become more three dimensional and realistic.
Contents Connections Playback Settings Tips Appendix Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Rock Arena This mode simulates the expansive sound of a live concert in an arena. Jazz Club This mode simulates the experience of being in an intimate jazz club. Mono Movie This mode works with monaural audio sources and delivers a surround sound effect.
Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type Stereo Description This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected. 0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
Contents Connections Playback Settings Tips Appendix o Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. 0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it. (v p.
Contents Connections Input signal Multi-channel z3 Dolby Digital Dolby TrueHD Dolby Digital Plus Dolby Atmos DTS Playback Sound mode Stereo Settings MOVIE button S Tips MUSIC button S Appendix GAME button S Dolby Digital S S S Dolby Digital + Dolby Surround S S S Dolby Digital A-DSX z4 S S S Dolby TrueHD S S S Dolby TrueHD + Dolby Surroundz5 S S S Dolby Atmosz6 S S S Dolby TrueHD A-DSX z4 S S S Dolby Digital Plus S S S Dolby Digital Plus + Dolby Surroundz5 S S
Contents Connections Input signal Playback Sound mode DTS-HD HI RES DTS-HD/ DTS Express DTS:X PCM multi-channel Multi-channel z3 Settings MOVIE button S Tips MUSIC button S Appendix GAME button S DTS-HD MSTR S S S DTS-HD MSTR A-DSX z4 S S S DTS Express S S S DTS Express A-DSX z4 S S S DTS-HD + Neural:X S S S DTS-HD HI RES A-DSX z4 S S S DTS:X S S S DTS:X MSTR S S S Multi Ch In S S S Multi Ch In 7.
Contents Connections Playback Settings Tips Appendix Upgrade (Auro-3D) Input signal z1/ 2-channel Multi-channel z3 Sound mode Auro-3Dz7 MOVIE button S MUSIC button S GAME button S S S S Auro-2D Surroundz8 z1 2-channel also includes analog input. z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and corresponding sound modes” (v p. 316).
Contents Connections Playback Settings Tips o Views on the display . Blu-ray Dolby D + S q w A Shows a decoder to be used. 0 In the case of the Dolby Digital Plus decoder, “Dolby D +” is displayed. B Shows a decoder that creates sound output. 0 “k” indicates that the Dolby Surround decoder is being used.
Contents Connections Playback Settings Tips Appendix HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 2 3 5 Enable the HDMI control function of this unit. Set “HDMI Control” to “On”. (v p. 205) Turn the power on for all the devices connected by HDMI cable.
Contents Connections Playback Settings Tips Appendix Smart Menu function This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. 2 3 Enjoy content from the input source currently selected on this unit. o Source Enable the HDMI control function of this unit and the TV. (v p. 205) Switch the input of this unit.
Contents Connections Playback Settings Tips o Setup Menu Displays a setup menu for configuring the settings of this unit. o Quick Select Calls up the QUICK SELECT items registered to this unit. NOTE 0 If the “HDMI Control” or “Smart Menu” settings have been changed, always reset the power to connected devices after the change. 0 The Smart Menu function may not work properly depending on the specifications of your TV. In this case, set “Smart Menu” to “Off”. (v p.
Contents Connections Playback Settings Tips Appendix Sleep timer function Z2 Z3 AVR CONTROL Z2 MAIN DEV. V. You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. The sleep timer function can be set for each zone.
Contents Connections Playback Settings Press SLEEP when the sleep timer is in operation. The remaining time appears on the display. Press MAIN, Z2 or Z3 to select the operating zone with the remote control. o To cancel the sleep timer The button for the selected zone is lit. 2 Appendix o Checking the remaining time Using the sleep timer 1 Tips Press SLEEP to select “Off”. Press SLEEP and display the time you want to set. The B indicator on the display turns off.
Contents Connections Playback Settings Tips Appendix Quick select plus function Z2 Z3 AVR CONTROL Z2 MAIN DEV. V. Settings such as the input source, volume level and sound mode can be registered to the QUICK SELECT 1 - 4 buttons. You can simply press one of the registered QUICK SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch.
Contents Connections Playback Settings Tips Calling up the settings 1 2 Press MAIN, Z2 or Z3 to select the operating zone with the remote control. The button for the selected zone is lit. Press QUICK SELECT. The Quick Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below.
Contents Connections Playback Settings Changing the settings 1 2 Tips Press MAIN, Z2 or Z3 to select the operating zone with the remote control. The button for the selected zone is lit. Set the items below to the settings you want to register. 3 The following settings from A to I can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2 and ZONE3. Press and hold the desired QUICK SELECT until “Quickz Memory”, “Z2 Quickz Memory” or “Z3 Quickz Memory” appears on the display.
Contents Connections Playback Settings Tips Appendix Web control function You can control this unit from a web control screen on a web browser. . Controlling the unit from a web control PC Router 1 This unit 2 Switch the “Network Control” setting to “Always On”. (v p. 255) Check the IP address of this unit with “Information”. (v p. 249) Network/Information Friendly Name DHCP Connection IP Address MAC Address Denon AVR-X4200W On Wired (Ethernet) 192.168.100.
Contents Playback Settings 5 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. Tips Setup Menu MAIN ZONE CBL/SAT Audio http://192.168.100.19 File Edit View Appendix When the top menu is displayed, click on the menu item you want to operate. Video Favorites Tools Help ZONE2 Online Music Inputs ZONE3 CBL/SAT . Speakers Network General Save Load .
Contents Connections Playback Settings Tips Appendix Playback in ZONE2/ZONE3 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2 and ZONE3) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3.
Contents Connections Playback Settings Tips Appendix o Connection 2 : Connection through the video output connector and speaker output connector When “Assign Mode” in the menu is set to any of the following audio is output from speakers in ZONE2 or ZONE3. (v p. 232) n Assign Mode: 5.1ch + ZONE2 n Assign Mode: 5.1ch + ZONE3 MAIN ZONE ZONE2 This unit ZONE3 MAIN ZONE This unit VIDEO (L) COMPONENT VIDEO IN Y PB PR w . VIDEO IN or (L) q w q .
Contents Connections Playback Settings Tips Appendix n Assign Mode: 5.1ch + ZONE2/3-MONO MAIN ZONE This unit ZONE2 ZONE3 VIDEO COMPONENT VIDEO IN Y PB PR VIDEO IN w or q .
Contents Connections Playback Settings Tips Appendix o Connection 3 : Connection through the video output connector and external power amplifiers The audio signals of this unit’s ZONE2 and ZONE3 audio output connectors are played on the ZONE2 and ZONE3 power amplifiers. ZONE2 MAIN ZONE ZONE3 VIDEO VIDEO IN This unit COMPONENT VIDEO IN Y PB PR Power amplifier AUX IN or Power amplifier L R AUX IN .
Contents Connections Playback Settings Tips Appendix 0 The analog audio signal and the 2-channel PCM signal input from HDMI connector or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2. 0 If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set “HDMI Audio” to “PCM”. (v p. 262) 2-channel PCM signals are output from a device connected to the input source selected for ZONE2 and can be played back in ZONE2.
Contents Connections Playback Settings Playback in ZONE2/ZONE3 Z2 Z3 AVR CONTROL Z 2 POWER Z3 MAIN DEV. V. TV 2 POWER X AVR DEVICE TV MENU Input source select buttons 1 MENU CB / CBL SAT DVD VD INP INPUT TV AUDIO Blu-ray AUX1 TUNER Bluetooth GAME AUX2 PHONO iPo iPod/ USB MEDIA IA PLAYER ER CD ONLINE MUSIC INTERNET RADIO ADIO 1 2 3 4 ECO MUTE : CH /PAGE PAGE VOLUME MUTE INFO Press Z2 or Z3 to switch the zone mode. Z2 or Z3 button lights.
Contents Connections Playback Settings Tips o Adjusting the volume (ZONE2/ZONE3) Use VOLUME df to adjust the volume. 0 At time of purchase, “Volume Limit” is set to “70 (–10 dB)”. (v p. 262) 0 Turn MASTER VOLUME after pressing ZONE2 SOURCE or ZONE3 SOURCE on the main unit to adjust the volume. o Turning off the sound temporarily (Muting) (ZONE2/ZONE3) Press MUTE :. The sound is reduced to the level set at “Mute Level” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Detailed items Description Page Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel.
Contents . Setting items Inputs Connections Playback Settings Detailed items Tips Appendix Description Page Input Assign Changes input connector assignment. 215 Source Rename Changes the display name for input source. 217 Hide Sources Removes from the display input sources that are not used. 218 Source Level Adjusts the playback level of the audio input. 218 Input Select Sets the audio input mode and decode mode.
Contents Connections Setting items Playback Settings Detailed items Tips Appendix Description Page Changes the language of the display on the TV screen. 258 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 258 ZONE2 Setup/ ZONE3 Setup Makes settings for audio playback with ZONE2 and ZONE3. 261 Zone Rename Changes the display title of each zone to one you prefer. 263 Quick Select Names Changes the Quick Select Name display title to one you prefer.
Contents Connections AVR CONTROL Z2 Settings MAIN TV MAIN AVR DEVICE 1 TV MENU CB / CBL SAT DVD VD Blu-ray GAME TV AUDIO AUX1 TUNER Bluetooth AUX2 PHONO iPo iPod/ USB MEDIA IA PLAYER ER CD ONLINE MUSIC INTERNET RADIO ADIO 1 2 2 3 QUICK SELECT 3 4 ECO CH /PAGE PAGE uio p ENTER BACK 4 5 VOLUME MUTE INFO OPTION ENTER SETUP BACK TUNE TUNE Press MAIN on the remote control unit to set the operating zone to the MAIN ZONE. Press SETUP.
Contents Connections Playback Settings Tips Inputting characters 0 On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Preset Name (v p. 110) 0 Text Search (v p. 138) 0 Source Rename (v p. 217) 0 Friendly Name (v p. 255) 0 Zone Rename (v p. 263) 0 Quick Select Names (v p. 263) 0 Character input for the network functions 0 The following two methods can be used for inputting characters. 0 Using the keyboard screen (v p.
Contents Connections Playback Settings Tips Appendix Using the keyboard screen 1 3 Display the screen for inputting characters. GExampleH “Source Rename” screen Inputs/Source Rename CBL/SAT Insert Delete A B C D E F G H N O P Q R S I J K L M T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! $ % & < = > a/A 4 CBL/SAT Clear ‘ ( ) * + Space , Cancel ; “ 5 6 # O K Select a character to be input with uio p then press ENTER. Repeat steps 2 - 4 to change the name.
Contents Connections Playback Settings Tips Using the number buttons 1 2 When the keyboard screen is displayed, press 0 – 9. The 10 key input screen is displayed. Place the cursor at the character to be changed with o p and press the number button (0 – 9) until the desired character is displayed. 0 The types of characters that can be input are as shown below. 1.@-_/:˜ MNOmno6 ABCabc2 PQRSpqrs7 DEFdef3 TUVtuv8 GHIghi4 WXYZwxyz9 JKLjkl5 0 (Space) ! “ # $ % & ‘ ( ) z + , . ;<=>?[\]^`{|} 3
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Dialog Level Adjust Subwoofer Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel. This setting adjusts the volume level for the subwoofer. o Subwoofer Level Adjust o Dialog Level Adjust Set whether to adjust the subwoofer level. Set whether to adjust the dialog level or not. On: Enables the adjustment of the dialog level.
Contents Connections Playback Settings Tips Appendix o Loudness Management Surround Parameter This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode.
Contents Connections Playback Settings Tips o Low Frequency Effects o Dynamic Compression Adjust the low frequency effects level (LFE). Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off.
Contents Connections Playback Settings o Center Spread Tips Appendix o DTS Neural:X Center spread expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content. On: Use “Center Spread”. Off (Default): Do not use “Center Spread”. DTS Neural:X Expands the non-object based audio signals and optimizes them for your speaker configuration.
Contents Connections Playback Settings Upgrade (Auro-3D) Tips Upgrade (Auro-3D) o Auro-Matic 3D Preset o Auro-Matic 3D Strength Selects the Auro-Matic 3D Preset for fine tuning the Auro-3D experience to specific audio material. Small: Small is ideal for pop and chamber music or movies with a lot of dialog. (e.g. comedy) Medium (Default): Medium is best used on jazz music or typical movies and TV shows. Large: Large is ideal for recordings that were recorded in large spaces. (e.g.
Contents Connections Playback Settings o Delay Time Tips Appendix o Room Size Adjust the audio delay time against video to extend the sound field image. Determine size of acoustic environment. 0 ms – 300 ms (Default : 30 ms) 0 You can set this when the sound mode is “Matrix”. o Effect Level Adjust the sound effect level of the current sound mode. Small: Simulate acoustics of a small room. Medium small: Simulate acoustics of a medium-small room.
Contents Connections Playback Settings Tips Appendix o Subwoofer o Speaker Select Makes settings for the speakers outputting sound. Turn subwoofer output on and off. Floor (Default): Plays back without height speakers. On (Default): The subwoofer is used. Floor & Height: Plays back with height speakers. Off: The subwoofer is not used. Front: Plays back only with speakers in front of the surround speaker.
Contents Connections Playback Settings Tips Appendix Restorer 0 This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48 kHz) is input. 0 This item default setting for “Online Music”, “iPod/USB” and “Bluetooth” is “Low”. All others are set to “Off”. 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”. 0 “Restorer” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix o Limit Audio Delay Make a setting for maximum volume. Compensates for incorrect timing between video and audio. 60 (–20 dB) / 70 (–10 dB) / 80 (0 dB) 0 ms – 200 ms (Default : 0 ms) Off (Default) o Power On Level 0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or “Game”. (v p. 209) 0 “Audio Delay” settings are stored for each input source. Define the volume setting that is active when the power is turned on.
Contents Connections Playback Settings o Mute Level Tips Appendix Audyssey® Set the amount of attenuation when muting is on. Full (Default): The sound is muted entirely. –40 dB : The sound is attenuated by 40 dB down. –20 dB : The sound is attenuated by 20 dB down. Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed.
Contents Connections Playback Settings Tips o Dynamic EQ o MultEQ® XT32 Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ® XT32. MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the “Reference” setting.
Contents Connections Playback Settings o Reference Level Offset Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Audyssey Dynamic is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB.
Contents Connections Playback Settings o Audyssey LFC™ Tips Appendix o Audyssey DSX® Adjusts the low frequency band to prevent bass and vibration from being conveyed to neighboring rooms. On: Use “Audyssey LFC™”. Off (Default): Do not use “Audyssey LFC™”. Provides more immersive surround sound by adding the new channels. o Containment Amount Adjusts the amount of low frequency containment. Use higher settings if you have close neighbors.
Contents Connections Playback Settings o Stage Width Tips Appendix Graphic EQ Adjust sound stage width when using front wide speakers. Uses the graphic equalizer to adjust the tone of each speaker. –10 – +10 (Default : 0) o Stage Height 0 Speakers for which “Graphic EQ” can be set differ according to the sound mode. 0 This can be set when the “MultEQ® XT32” setting is “Off”. (v p. 195) 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
Contents Connections Playback Settings o Speaker Selection Tips Appendix o Adjust EQ Select whether to adjust tones for individual speakers or for all speakers. All: Adjust all speaker tones together. Left/Right (Default): Adjust the left and right speaker tones together. Each: Adjust the tone for each speaker. Adjust tonal balance for each frequency band. 1. Select the speaker. 2. Select the adjustment frequency band.
Contents Connections Playback Settings Tips o Curve Copy Copy the Flat correction curve created in the Audyssey® Setup. 0 “Curve Copy” is displayed after Audyssey® Setup has been performed. 0 “Curve Copy” cannot be used when using headphones. o Set Defaults The “Graphic EQ” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix Video Make video-related settings. o Picture Mode Picture Adjust Select the desired picture mode according to the video content and your viewing environment. Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. (v p. 210) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p.
Contents Connections Playback Settings Tips o Contrast Adjust picture contrast. 0 The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISFcertified technician. 0 These settings can also be configured using “Picture Mode” in the option menu. (v p. 144) 0 The default settings are as follows.
Contents Connections Playback Settings o Noise Reduction Tips Appendix HDMI Setup Reduce overall video noise. Make settings for HDMI video/audio output. Low / Medium / High / Off (Default : Off) NOTE 0 When “HDMI Control” and “HDMI Pass Through” is set to “On”, it consumes more standby power. (“HDMI Control” (v p. 205), “HDMI Pass Through” (v p. 206)) If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
Contents Connections Playback Settings o HDMI Audio Out Tips Appendix o Video Output Select HDMI audio output device. Select the HDMI monitor connector to be used. AVR (Default): Play back through speakers connected to the unit. TV: Play back through TV connected to the unit. 0 When the HDMI control function is activated, priority is given to the TV audio setting. (v p.
Contents Connections Playback Settings o HDMI Control Tips Appendix o ARC You can link operations with devices connected to HDMI and compatible with HDMI Control. On the TV connected to the HDMI MONITOR 1 connector, set whether to receive sound from the TV via HDMI. On: Use HDMI control function. On: Use ARC function. Do not use HDMI control function. Off (Default): Do not use ARC function.
Contents Connections Playback Settings o HDMI Pass Through Tips Appendix o Pass Through Source Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. On (Default): Transmits the selected HDMI input through the AV receiver’s HDMI output when this unit is in standby power mode. Off: No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. Sets the HDMI connector that inputs HDMI signals when in standby.
Contents Connections Playback Settings o TV Audio Switching Tips Appendix o Power Off Control Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to the AVR. On (Default): Select the “TV Audio” input automatically when receiving a command from the TV. Off: Do not select the “TV Audio” input automatically when receiving a command from the TV. Links the power standby of this unit to external devices.
Contents Connections Playback Settings o Power Saving Tips Appendix o Smart Menu If “TV Speaker” is set as the audio output setting of your TV, this unit is automatically set to standby mode to reduce power consumption. This function is activated in the following cases. 0 When “TV Audio” is selected as the input source of this unit 0 When playing content from a device connected by HDMI On: Use Power Saving function. Off (Default): Do not use Power Saving function.
Contents Connections Playback Settings Tips Appendix o Video Mode Output Settings Configure the video processing method to match the type of video content. Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p. 216) 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”. (“Resolution” (v p. 211), “Progressive Mode” (v p. 212), “Aspect Ratio” (v p.
Contents Connections Playback Settings o Video Conversion Appendix o i/p Scaler The input video signal is converted automatically in conjunction with the connected TV. (v p. 304) On (Default): The input video signal is converted. Off: The input video signal is not converted. Front panel Tips Display Rear panel Set the video input signal to be subjected to i/p scaler processing. i/p Scaler will convert the resolution of the input video signal to the value set in “Resolution”. (v p.
Contents Connections Playback Settings Use i/p scaler function. Off: Do not use i/p scaler function. Appendix o Resolution n When the input source is set to “iPod/USB” and “Online Music” On (Default): Tips Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. 0 “Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned.
Contents Connections Playback Settings o Progressive Mode Tips Appendix o Aspect Ratio Set an appropriate progressive conversion mode for the source video signal. Auto (Default): The video signal is automatically detected and the appropriate mode is set. Video: Select mode suitable for video playback. Video and Film: Select mode suitable for video and 30frame film material playback. Set the aspect ratio for the video signals output to the HDMI. 16:9 (Default): Output at 16:9 aspect ratio.
Contents Connections Playback Settings Component Video Out Tips Appendix On Screen Display Set the zone to which the component video output connector is assigned. Select the on-screen display user interface preferences. MAIN ZONE (Default): Assigns the component video output connector to MAIN ZONE. o Volume ZONE2: Assigns the component video output connector to ZONE2. Sets where to display the volume level. Bottom (Default): Top: Off: Display at the bottom. Display at the top.
Contents Connections Playback Settings o Now Playing Tips Appendix TV Format Sets the display time for the playback display when the input source is “Online Music”, “iPod/USB”, “Bluetooth” or “Tuner”. Set the video signal format to be output for the TV you are using. Always On (Default): Show display continuously. o Format Auto Off: Show display for 30 seconds after operation. NTSC (Default): Select NTSC output. PAL: Select PAL output.
Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign 0 By default, each item is set as follows. By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audio or video from a connected device.
Contents Connections Playback Settings o HDMI Tips Appendix o ANALOG Set this to change the HDMI input connectors assigned to the input sources. Set this to change the analog audio input connectors assigned to the input sources. 1/2/3/4/5/6/7/ Front: Assign an HDMI input connector to the selected input source. 1 / 2 / 3 / 4 / 5 / Front: –: Do not assign an HDMI input connector to the selected input source.
Contents Connections Playback Settings o VIDEO –: Appendix Source Rename Set this to change the composite video input connectors assigned to the input sources. 1 / 2 / 3 / Front: Tips Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
Contents Connections Playback Settings Hide Sources Tips Appendix Source Level Remove from the display input sources that are not used. Show (Default): Use this source. Hide: Do not use this source. This function corrects the playback level of the selected input source’s audio input. Make this setting if there are differences in the input volume levels between the different sources.
Contents Connections Playback Settings Appendix o Decode Mode Input Select Set the audio decode mode for input source. It is normally recommended to set the audio input mode to “Auto”. But we recommend changing it to “PCM” or “DTS” if the start of the source is clipped or noise occurs. Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. 0 “Input Select” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”. You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”. To set up the speakers manually, use “Manual Setup” on the menu. (v p.
Contents Connections Playback Settings o About the main listening position 0 Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows and turn off the power on electronic devices (radios, air conditioners, fluorescent lights, etc.). The measurements could be affected by the sounds emitted by such devices. 0 During the measurement process, place cell phones outside the listening room. Cell phone signals could disrupt the measurements.
Contents Connections Playback Settings Procedure for speaker settings (Audyssey® Setup) 1 Tips Appendix Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it at the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceiling and adjust the height to match the height of the ears of a listener in a seated position.
Contents Playback Settings 4 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. When the Sound calibration microphone is connected, the following screen is displayed. . Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary. 5 Amp Assign Channel Select Dolby Speaker Setup Tips Select “Start”, then press ENTER.
Contents Playback Settings 7 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. Tips Appendix When the detected speaker is displayed, select “Next” and then press ENTER. Audyssey Setup Speaker Detection Audyssey Setup Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests. Front Center Subwoofer Surround :Yes :Yes :Yes :Yes Ear Height Next .
Contents Playback Settings 9 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. Tips Appendix Repeat step 8, measuring positions 3 to 8. 0 To skip measuring the fourth and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 11.
Contents 11 Connections Playback Settings 12 Perform the settings for Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. The following screen is displayed during the analysis. Configure the settings as preferred. Tips Appendix When the analysis and storage ends, unplug the Sound calibration microphone from the SETUP MIC jack on the main unit and then press “Next”. Audyssey Setup Now Analyzing and correcting the your room data. Please disconnect the microphone from your AV receiver.
Contents 13 Connections Playback Settings Tips Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE 0 Do not change the speaker connection or subwoofer volume after Audyssey® Setup. If these are changed, run Audyssey® Setup again in order to configure the optimum equalizer settings.
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details No speakers found.
Contents Connections Playback Settings o Subwoofer level error message and how to adjust 1 2 The optimal level of each subwoofer channel for Audyssey® Setup measurement is 75 dB. During subwoofer level measurement, an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range. When using a subwoofer with built-in amplifier (active type), adjust the subwoofer volume so that the subwoofer level is within the 72 to 78 dB range.
Contents Connections Playback Settings Tips Retrieving Audyssey® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ® XT32) even when you have changed each setting manually. Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary.
Contents Connections Playback Settings Manual Setup Appendix 0 Setting to use the 7-channel power Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 0 If you change the speaker settings after performing Audyssey® Setup, you will no longer be able to select Audyssey MultEQ® XT32, Audyssey Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 194) 0 “Manual Setup” can be used without changing the settings. Please set if necessary. 9.
Contents Connections 5.1ch + ZONE2 (Default): Settings 0 Setting to assign the power amplifiers 0 Setting to assign the power amplifiers in this unit for ZONE3 to 2-channels 5.1ch + ZONE2/3-MONO : Tips 5.1ch + Front B : 0 Setting to assign the power amplifiers in this unit for ZONE2 and ZONE3 each to a different channel. 0 Setting to assign the power amplifiers within this unit for connecting the second set of front speakers.
Contents Connections Playback Settings n Height Sp n Layout Select the number of the height speakers and ceiling speakers used in MAIN ZONE. Select the floor speakers location. 5ch & SBz2 (Default)： 5ch & FWz1： 5chz2： This layout combines a surround back or front wide speaker with the basic 5channel layout. This layout combines a surround back speaker with the basic 5-channel layout. This layout combines a front wide speaker with the basic 5-channel layout.
Contents Connections Playback Settings Tips Appendix n Layout Select the height, ceiling, or Dolby Atmos Enabled speaker location. The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” - “Layout” in the menu. (“Assign Mode” (v p. 231), “Floor” - “Layout” (v p.
Contents Connections Playback Settings NOTE Height Speakers Dolby Speakers 2ch 2ch z1 None 4ch z1 Settings Tips Appendix Layout Front Dolby & Top Rear Front Dolby & Rear Height Front Height & Surr. Dolby Top Front & Surround Dolby Front Dolby & Surround Dolby AUDIO OUT connectors HEIGHT1 HEIGHT2 Front Dolby Top Rear Front Dolby Rear Height Front Height Surround Dolby Top Front Surround Dolby Front Dolby Surround Dolby Layout Front Height & Surr.
Contents Connections Playback o Pre-out When “Assign Mode” is set to “9.1ch”, selects the PRE OUT connectors that connect the external power amplifier used in MAIN ZONE. The PRE OUT connectors that can be selected differ depending on the combination of “Floor” - “Layout” and “Height” - “Layout” settings configured in the menu. Surr. Back (Default)： The surround back left and right pre-amp outputs are connected to an external amplifier.
Contents Connections Playback Settings Tips Appendix o Center Speaker Config. Set the presence and size of the center speaker. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. Large: Use a large speaker that can adequately play back very low bass frequencies. 0 When speakers for which you assigned Height1 in “Amp Assign” are set to “None”, “None” is automatically set for Height2.
Contents Connections Playback Settings Tips Appendix o Surr. Back o Surround Set the presence, size and number of surround back speakers. Set the presence and size of the surround speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips Appendix o Front Dolby o Front Wide Set the presence and size of the front Dolby speakers. Set the presence and size of the front wide speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips Appendix o Top Rear o Top Middle Set the presence and size of the top rear speakers. Set the presence and size of the top middle speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings o Back Dolby Appendix Upgrade (Auro-3D) Set the presence and size of the back Dolby speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when the back Dolby speakers are not connected. o Surround Height Set the presence and size of the surround height speakers.
Contents Connections Playback Settings Tips o Set the distance Distances 0.0 ft – 60.0 ft / 0.00 m – 18.00 m Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. 0 The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (“Amp Assign” (v p. 231), “Speaker Config.” (v p. 237)) 0 Default settings: Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center / F.
Contents Connections Playback Settings o Dolby Speaker Setup Tips Appendix Levels Set the distance between the Dolby Atmos Enabled speaker and the ceiling. Set the volume of the test tone to be the same at the listening position when it is output from each speaker. 3.0 ft - 11.0 ft / 0.90 m - 3.30 m(Default : 6.0 ft / 1.80 m) o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker.
Contents Connections Playback Settings Tips Appendix o Set the crossover frequency Crossovers 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 80 Hz) Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency.
Contents Connections Playback Settings Tips o LPF for LFE Bass Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer. Set subwoofer and LFE signal range playback. o Subwoofer Mode 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 120 Hz) Select low range signals to be reproduced by subwoofer.
Contents Connections Playback Settings Front Speaker Tips Appendix 2ch Playback Set the front speaker A/B to use for every sound mode. A (Default): Front speaker A is used. B: Front speaker B is used. A+B : Both front speakers A and B are used. Select the method for setting the speakers used in the 2-channel direct and stereo playback modes. o Setting Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
Contents Connections Playback Settings o Subwoofer Tips Appendix o SW Mode Set the presence of a subwoofer. Select low range signals to be reproduced by subwoofer. Yes (Default): Use a subwoofer. No: Select when a subwoofer is not connected. 0 When “Speaker Config.”-“Subwoofer” in the menu is set to “None”, No is automatically set. (v p. 237) If the “Front” setting is “Small”, the setting is automatically “Yes”.
Contents Connections Playback Settings o Crossover Tips o Level FL/Level FR Set the maximum frequency of the bass signal output from each channel to the subwoofer. Adjust the level of each channel. -12.0dB – +12.0dB (Default : 0.0dB) 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 80 Hz) 0 This can be set when “2ch Playback”-“Subwoofer” is set to “Yes”.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
Contents Connections Playback Settings o Connect Using Wireless (Wi-Fi): Appendix Wi-Fi Setup Select the method for connecting to the home network (LAN). Wired (Ethernet): Tips Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. Use a LAN cable to connect to a network. Use the wireless LAN (Wi-Fi) function to connect to a network.
Contents Connections Playback Settings Tips o WPS Router n When connecting using Wi-Fi Use a WPS-compatible router to connect. There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router. 1. Select “Wireless connection” on the TV screen. 2. Check that your iOS device is connected to the wireless LAN (Wi-Fi) router and select “Denon AVR-X4200W” from “SET UP NEW AIRPLAY SPEAKER...
Contents Connections Playback Settings Tips Appendix o Manual Enter the name (SSID) and password of the network you wish to connect to. 0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection. 0 When using a device that has a firmware version of iOS 7 or later, “When connecting using Wi-Fi” (v p. 251) in “Use iOS Device”. 1. Set the following items. SSID: Input the name of the wireless network (SSID).
Contents Connections Playback Settings Tips o DHCP Settings Selects how to connect to the network. Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit.
Contents Connections Playback Settings o Default Gateway Tips o Port When connected to a gateway (router), input its IP address. Enter port number. o Primary DNS, Secondary DNS 0 If you cannot connect to the Internet, recheck the connections and settings. (v p. 84) 0 If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer.
Contents Connections Playback Settings Network Control Tips Appendix Friendly Name Enables network communication in standby power mode. Off In Standby: Suspend network function during standby. Always On (Default): Network is on during standby. Main unit operable with a network compatible controller. The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list.
Contents Connections Playback Settings Checks whether this unit has access to the Internet (WAN). Used to check the network connection. OK o Physical Connection Error: Checks the physical LAN port connection. OK Failed to connect to the Internet. Check the Internet connection environment or router settings. The LAN cable is not connected. Check the connection. 0 When connected using a wireless LAN, “Connection be displayed.
Contents Connections Playback Settings Tips Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer. Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE 0 Only use this function if so instructed by a Denon serviceperson or installer.
Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ECO Set the language for display the menu on the TV screen. Configure the settings of the ECO Mode and auto standby mode. English / Français / Español (Default : English) o ECO Mode This mode can reduce the power consumption when the power of the unit is on. 0 “Language” can also be set up by the following operation. However, the menu screen is not displayed.
Contents Connections Playback Settings o Power On Default Appendix o On Screen Display Set the mode to ECO when the power is on. Last (Default): The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”. Auto: When power is turned on, the mode will always be switched to the ECO Mode in “Auto”. Off: When power is turned on, the mode will always be switched to the ECO Mode in “Off”.
Contents Connections Playback Settings o Auto Standby Tips Appendix n ZONE2 / ZONE3 When there are no operations for a certain period of time as set here, the power is automatically shut off even if there is audio or video input. Set so the unit power automatically switches to standby. n MAIN ZONE Sets the time for switching to auto standby when there are no audio or video signals input into this unit.
Contents Connections Playback Settings Tips o Lch Level ZONE2 Setup/ZONE3 Setup Adjust the left channel output level. Makes settings for audio playback with ZONE2 and ZONE3. -12 dB – +12 dB (Default : 0 dB) o Rch Level 0 Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale” (v p. 193). Adjust the right channel output level. o Bass -12 dB – +12 dB (Default : 0 dB) Adjust bass.
Contents Connections Playback Settings o HDMI Audio (ZONE2 only) Tips Appendix o Volume Limit Selects the audio signal format for playing an HDMI source in ZONE2. Make a setting for maximum volume. Through (Default): The HDMI audio signal is passed through this unit to the device in ZONE2. 60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB)) The HDMI audio signal input into this unit is converted to a PCM signal that can be output from the ZONE2 PRE OUT connectors or speaker terminals.
Contents Connections Playback Settings o Mute Level Tips Appendix Zone Rename Set the amount of attenuation when muting is on. Change the display title of each zone to one you prefer. Full (Default): The sound is muted entirely. MAIN ZONE / ZONE2 / ZONE3 –40 dB : The sound is attenuated by 40 dB down. Set Defaults: –20 dB : The sound is attenuated by 20 dB down. The default setting is restored for the edited zone name. 0 Up to 10 characters can be input.
Contents Connections Playback Settings Trigger Out 1/Trigger Out 2 Makes settings related to the display on this unit. o Dimmer Adjust the display brightness of this unit. n When setting for zone (MAIN ZONE / ZONE2 / ZONE3) Trigger out is activated through linkage to the power of the zone set to “On”. n When setting for input source Activate trigger out when the input source set to “On” is selected. n When setting for HDMI monitor On: Activate trigger on this mode.
Contents Connections Playback Settings Tips o Channel Indicators Sets whether to use the input signal display or output signal display for the channel indication on the display. Input: Uses the input signal display for the channel indication on the display. Output (Default): Uses the output signal display for the channel indication on the display.
Contents Connections Playback Settings When the latest firmware is available, a notification message is displayed on the TV screen at power on. The notification message is displayed for about 40 seconds when the power is turned on. Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for updates and upgrades. o Update Update Updates the firmware of this unit. Execute the update process.
Contents Connections Playback Settings o Add New Feature Notes concerning use of “Update” and “Add New Feature” Upgrade Package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. requirements and settings for an Internet connection. (v p. 84) 0 Do not turn off the power until updating or upgrading is completed. 0 Approximately 1 hour is required for the updating/upgrading procedure to be completed.
Contents Connections Playback Settings Tips Appendix o Video Information Show information about this unit settings, input signals, etc. Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. o Audio HDMI Signal Info. Resolution / Color Space / Pixel Depth Show the audio information for MAIN ZONE. Sound Mode: The currently set sound mode. Input Signal: The input signal type. Format: The number of input signal channels (presence of front, surround, LFE).
Contents Connections Playback Settings o Notifications To help us improve our products and customer service, Denon collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties. Notification Alerts Notification messages are displayed. Off: Notification messages are not displayed. Yes: Provide information on the operating status of this unit.
Contents Connections Playback Settings Tips Setup Lock Protect settings from inadvertent changes. o Lock On: Turn protection on. Off (Default): Turn protection off. 0 When cancelling the setting, set “Lock” to “Off”. NOTE 0 When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”.
Contents Connections Playback Settings Tips Appendix Operating external devices with the remote control unit Z2 Z3 Operation mode indicators CBL/SAT DVD Blu-ray AUX1 GAME AUX2 MEDIA PLAYER CD AVR CONTROL Z 2 Z3 MAIN DEV. V. When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers.
Contents Connections Playback Settings Tips n Registering DVD players Registering preset codes 1 There are two methods for registering preset codes; the simple method for registering preset codes of Denon players, and the method for registering the preset numbers of other manufacturers’ devices. 0 “Registering Denon players” (v p. 272) 0 “Registering by entering preset numbers” (v p.
Contents Connections Playback Settings n Registering multiple players at the same time 1 The following table shows the device groups that can be registered for each of the input source select buttons. Check the preset number of the device you want to register beforehand in the “Remote Control Preset Codes” file.
Contents 1 2 Connections Playback Settings Tips Press and hold down the input source button that you want to register the preset code to and SETUP until the DEV, TV and AVR indicators are flashing green. Enter the preset number (5 digits) listed for the device in the Preset Code Table using the number buttons (0 – 9) on the remote control. 0 Some manufacturers use more than one type of preset code. Preset codes to change the number and verify correct operation.
Contents Connections Playback Settings Tips Appendix n CBL/SAT group (Set top box for satellite (SAT)/cable TV (CBL)/ Media player/IP TV) operation Operating devices To operate an external device, press the input source button registered with the preset code, followed by one of the buttons in the following tables. AVR CONTROL Z2 0 The “DEV.” indicator lights when an external device is being operated. 0 The “TV” indicator lights when the TV is being operated.
Contents Connections Playback Settings n TV group (TV) operation AVR CONTROL Z2 POWER Z3 MAIN DEV. V.
Contents Connections Playback Settings AVR CONTROL POWER Z3 MAIN DEV. V.
Contents Connections Playback Settings Initializing registered preset codes 1 All the settings are restored to their defaults. Press and hold down MAIN and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release. 1 2 To prevent accidental misuse, you can set the zone for which the remote control unit is used. Press and hold down DEVICE MENU until the DEV, TV and AVR indicators on the remote are flashing green, then release. Press 9, 8 and 1, in that order.
Contents Connections Playback Settings o Contents Tips Appendix Troubleshooting Tips I want the volume not to become too loud by mistake 280 I want to keep the volume at the same level when I turn the power on 280 I want to have the subwoofer always output audio 280 I want to make human voices in the movies clearer 280 I want to keep bass and clarity during playback at a lower volume level 280 I want to automatically adjust the volume level difference in content such as TV and movies 280
Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. (“Volume” (v p. 193), “Volume Limit” (v p.
Contents Connections Playback Settings Tips Appendix I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one. 0 Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 220) I want to combine a desired video with the current music 0 Set “Video Select” in the option menu to “On”.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit.
Contents Connections Playback Settings Tips Appendix o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 88 Power automatically turns off. 0 The sleep timer is set. Turn on the power again. 164 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To 260 Power turns off and the power indicator flashes in red approx.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page 0 Batteries are worn out. Replace with new batteries. 10 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 10 30°. 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution Page 0 Check the connections for all devices. 32 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 42 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix o Desired sound does not come out Symptom The volume does not increase. Cause / Solution Page 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. No sound comes out with the HDMI connection. 0 Check the connection of the HDMI connectors.
Contents Connections Playback Symptom Settings Tips Appendix Cause / Solution Page DTS Neural:X mode cannot 0 DTS Neural:X cannot be selected when using the headphones. be selected. Dolby Surround mode cannot be selected. － 0 Dolby Surround cannot be selected when using the headphones. － Audyssey MultEQ® XT32, 0 These cannot be selected when you have not performed Audyssey® Setup. Audyssey Dynamic EQ®, 0 Switch to a sound mode other than “Direct” or “Pure Direct”.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom During playback from the Internet radio or USB memory device, sound is occasionally interrupted. Cause / Solution Page 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. － 0 The network communication speed is slow or the radio station is busy. － When making a call on iPhone, noise occurs in audio output on this unit.
Contents Connections Playback Settings Tips Appendix o No video is shown on the TV Symptom No picture appears. 0 Check the connections for all devices. Cause / Solution Page 71 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Match the input settings to the input connector of the TV connected to this unit. 215 0 Check that the proper input source is selected.
Contents Connections Playback Settings Tips Symptom Cause / Solution When using HDMI ZONE2, 0 When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2, video in MAIN ZONE may be interrupted. the video output in MAIN ZONE is interrupted.
Contents Connections Playback Settings Tips Appendix o The menu screen is not displayed on the TV Symptom The menu screen or status information screen is not displayed on the TV. Cause / Solution Page 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on this unit.
Contents Connections Playback Settings Tips Appendix o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be － 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Contents Connections Playback Settings Tips Appendix o USB memory devices cannot be played back Symptom “No connection” is displayed. Cause / Solution Page 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 80 0 Mass storage class compatible USB memory devices are supported. － 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to － 0 The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix o File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause / Solution Page 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. － o Bluetooth cannot be played back Symptom Bluetooth devices cannot be connected to this unit. The sound is cut off.
Contents Connections Playback Settings Tips Appendix o The Internet radio cannot be played back Symptom Cause / Solution Page A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can 0 Perform the network diagnostic mode.
Contents Connections Playback Settings Tips Appendix o Music files on PC or NAS cannot be played back Symptom Files stored on a computer cannot be played. Cause / Solution Page 0 Files are stored in a non-compatible format. Record in a compatible format. 308 0 Files that are copyright protected cannot be played on this unit. － 0 The set’s USB port cannot be used for connection to a computer. － 0 Media sharing settings are not correct.
Contents Connections Playback Settings Tips Appendix o The HDMI control function does not work Symptom The HDMI control function does not work. Cause / Solution Page 0 Check that “HDMI Control” in the menu is set to “On”. 205 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, 161 0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
Contents Connections Playback Settings Tips Appendix o Cannot connect to a wireless LAN network Symptom Cannot connect to the network. Cause / Solution Page 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the 252 0 Shorten the distance from the wireless LAN access point and remove any obstructions to improve access － network settings according to the setting details of this unit. first before re-connecting again.
Contents Connections Playback Settings Tips Appendix o When using HDMI ZONE2, the devices does not function properly Symptom When using MAIN ZONE, video output is interrupted in HDMI ZONE2. Cause / Solution Page 0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video － may be interrupted in HDMI ZONE2. When using HDMI ZONE2, 0 Check that the power is on for ZONE2. no video or audio is output 0 Check the input source for ZONE2. from the TV in ZONE2.
Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. X 1 2 INFO 3 . Display Press X while simultaneously pressing INFO and BACK. Remove your fingers from the two buttons when “Initialized” appears on the display.
Contents Connections Playback Settings Tips Appendix About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not possible with the analog video transmission.
Contents Connections Playback Settings 0 Auto Lip Sync 0 ARC (Audio Return Channel) This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.
Contents Connections Playback Settings o Supported audio formats 2-channel, 32 kHz – 192 kHz, 16/20/24 bit Multi-channel Linear PCM 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD / Dolby Digital Plus / DTS:X / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express DSD 2-channel – 5.1-channel, 2.
Contents Connections Playback Settings Tips Appendix Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
Contents Connections Playback Settings Tips Appendix . This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. (v p.
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Media Memory capacity USB memory device 8 levels Number of folders 500 filesz2 5000 Number of This unit supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality.
Contents Connections Playback Settings Tips Appendix Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function o Playable broadcast station specifications The most recently used settings (input mode, HDMI output mode, sound mode, tone control, channel level, MultEQ® XT32, Dynamic EQ, Dynamic Volume, Restorer and audio delay, etc.) are saved for each input source. WMA Sampling frequency 32/44.1/48 kHz MP3 32/44.1/48 kHz Bit rate 48 – 192 kbps 32 – 320 kbps MPEG-4 AAC 32/44.
Contents Connections Playback Settings Tips Appendix Sound modes and channel output . S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p.
Contents Connections Playback Settings Tips Appendix .
Contents Connections Playback Settings Tips Appendix Delay Time Room Size Speaker Select S S S S S S S S S S .
Connections Playback Settings Tips Appendix .
Contents Connections Playback Settings Tips Appendix Delay Time Room Size .
Contents z1 z2 z3 z4 z5 z6 z7 z8 Connections Playback Settings Tips This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played. This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played. This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input. This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes . F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Sound mode NOTE Analog / PCM Dolby Digital (+/HD) DTS (-HD) Multi-channel signal DSD (Super Audio CD) PCM Multi DTS Surround DTS:X MSTR / DTS:X DTS-HD MSTR DTS-HD HI RES DTS ES Dscrt6.1 DTS ES Mtrx6.
Connections Playback Settings Tips Appendix . Contents 2-channel signal Sound mode Multi Ch In Multi Ch In Multi Ch In + Dolby Surround Multi Ch In 7.
Contents Connections Playback Settings Tips Appendix . Upgrade (Auro-3D) 2-channel signal Sound mode Auro-3D Auro-3D Auro-2D Surround z6, z7, z11 NOTE z11 z11 Analog / PCM Dolby Digital (+/HD) S S S S Multi-channel signal DTS (-HD) DSD (Super Audio CD) PCM Multi S S S S S S DTS:X DTS-HD S S S S DTS DTS ES DTS ES Express Dscrt6.1 Mtrx6.
Contents Connections Playback Settings Tips Appendix z1 This item can be selected when using any of the Surround Back, Front Wide, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby speaker. z2 This item can be selected when surround back speakers are used. z3 This item can be selected when the input signal is DTS-HD Master Audio. z4 This item can be selected when the input signal is DTS-HD Hi Resolution.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audyssey Audyssey Dynamic Surround Expansion (A-DSX) Audyssey DSX® is a new surround enhancement technology that raises the surround effect and impression to realize a larger surround space by adding a new channel to the existing 5.1 channel system. In research on human hearing characteristics, two points can be broadly cited as elements that enhance the surround effect.
Contents Connections Playback Settings Tips Upgrade (Auro-3D) Audyssey Dynamic Volume® Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Audyssey Dynamic EQ® is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same.
Contents Connections Playback Settings o Dolby Tips Appendix Dolby Digital Dolby Digital is a multi-channel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequency effects. Because of this, there is no crosstalk between channels and a realistic sound field with a “three-dimensional” feeling (sense of distance, movement and positioning) is achieved.
Contents Connections Playback Settings Tips Appendix o DTS Dolby Speaker Technology (Dolby Atmos Enabled speakers) A convenient alternative to speakers built into the ceiling, Dolby Atmos Enabled speakers employ the ceiling above you as a reflective surface for reproducing audio in the height plane above the listener. These speakers feature a unique upward firing driver and special signal processing. These features can be built into a conventional speaker or standalone speaker module.
Contents Connections Playback Settings Tips Appendix DTS-ES™ Discrete 6.1 DTS-HD High Resolution Audio DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder.
Contents Connections Playback Settings o Audio This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data. FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings Tips Appendix MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 Speaker impedance These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained when this value is smaller.
Contents Connections Playback Settings Tips Appendix o Video o Network ISF AirPlay ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance. AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network.
Contents Connections Playback Settings Tips Appendix WEP Key (network key) WPA-PSK/WPA2-PSK (Pre-shared Key) This is key information used for encrypting data when conducting data transfer. On this unit, the same WEP key is used for data encryption and decryption, so the same WEP key must be set on both devices in order for communications to be established between them.
Contents Connections Playback Settings Tips o Others Denon Link HD Denon Link HD uses the clock of the AV amplifier connected by Denon Link HD to achieve HDMI signal transfer with low jitter. HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization. MAIN ZONE The room where this unit is placed is called the MAIN ZONE.
Contents Connections Playback Settings Tips Appendix Trademark information . . Manufactured under license from Audyssey Laboratories™. U.S. and foreign patents pending. Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®, Audyssey DSX® and Audyssey LFC™ are registered trademarks of Audyssey Laboratories. .
Connections Playback Settings Tips Appendix . Contents For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTSX logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. . . The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips . Upgrade (Auro-3D) Manufactured under license from Auro Technologies. Auro-3D® and the related symbols are registered trademarks of Auro Technologies. All materials contained in this work are protected by copyright law and may not be reproduced, distributed, transmitted, displayed, published or broadcast without the prior written permission of Auro Technologies NV or in case of third party materials, the owner of that content.
Contents Connections Playback Settings Tips Specifications o Audio section 0 Power amplifier Rated output: Front: 125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
Contents Connections Playback Settings Tips 0 Analog Input sensitivity/Input impedance: 200 mV/47 kΩ/kohms Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 102 dB (IHF–A weighted, Direct mode) Distortion: 0.005 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V 0 Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.
Contents Connections Playback Settings Tips o Video section 0 Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz – 10 MHz — 0, –3 dB 0 Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms PB / CB signal — 0.7 Vp-p, 75 Ω/ohms PR / CR signal — 0.
Contents Connections Playback Settings Tips o Wireless LAN section Network type (wireless LAN standard): Security: Conforming to IEEE 802.11b Conforming to IEEE 802.11g Conforming to IEEE 802.11n (Wi-Fi® compliant)z1 WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz No. of channels: 1 – 11 ch z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx. 32.8 ft/10 m in line of sightz2 Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings Tips Appendix 1/2 (12) 3/4 (19) 2 1/4 (55) 9 3/8 (237) 15 3/8 (389) 13 3/8 (338) 2 3/4 (69) 1 3/8 (32) o Dimensions (Unit : in. (mm)) . 1 7/8 (47) o Weight : 27 lbs 12 oz (12.
Contents Connections Index Playback Settings vB v Numerics 3D ................................................................ 301 4K ................................................................ 301 5.1-channel .............................................. 39, 48 7.1-channel .............................................. 38, 49 9.1-channel .............................................. 38, 54 AirPlay .......................................................... 131 All Zone Stereo .................
Contents Connections vI Playback Settings vN Tips Appendix vR Input Assign ................................................. 215 NAS ............................................................. 117 Random playback .................................. 96, 136 Input settings ........................................ 179, 215 Network settings .......................................... 249 Rear panel ...................................................... 24 Input signal ............................
Contents Connections vT Playback Settings Tips vW Text Search .................................................. 138 Web control .................................................. 169 Tips .............................................................. 280 Wi-Fi settings ............................................... 250 Troubleshooting ........................................... 282 Wired LAN .............................................. 84, 250 TV ............................................
Contents Connections Playback Settings Tips Appendix License This section describes software license used for this unit. To maintain the correct content, the original (English) is used.
Contents Connections Playback Settings Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License. “Derivative Work” means a work based upon the Work or upon the Work and other pre-existing works.
Contents Connections Playback Settings You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this License apply to such Executable Files and/or Source Code.
Contents Connections Playback Settings http://www.xiph.org/vorbis/ Copyright (c) 2002-2004 Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings 0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 0 Neither the name of the Xiph.
Contents Connections Playback Settings http://curl.haxx.se COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 – 2011, Daniel Stenberg, . All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Connections Playback Settings Tips o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
. www.denon.com 349 3520 10406 00AD Copyright © 2015 D&M Holdings Inc. All Rights Reserved.
ENGLISH FRANÇAIS AVR-X4200W ESPAÑOL INTEGRATED NETWORK AV RECEIVER Quick Start Guide *XLGH GH FRQğJXUDWLRQ UDSLGH *XâD GH FRQğJXUDFLöQ UÀSLGD Read Me First.... Lisez-moi en premier.... / Lea esto primero.... Check our AVR setup tips online Please do not return this unit to the store. If you need help… Usa.denon.com/SetupTips Ca.Denon.com/SetupTips Call for Assistance 1-855-MY.DENON (USA) 1-800-668-0652 (Canada) 1-855-693-3666 Monday – Friday 10:00AM to 10:00PM E.S.
Welcome Before You Begin Required for Setup Thank you for choosing a Denon AV receiver. This guide provides step-bystep instructions for setting up your AV receiver. TV Speaker cables HDMI cable Subwoofer cable Speaker systems Optional or LAN cable Wi-Fi router • When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
What’s In the Box Quick Start Guide FM indoor antenna Safety Instructions AM loop antenna Notes on radio Sound calibration microphone Warranty (for North America model only) Cable labels Sound calibration microphone stand Receiver R6P/AA batteries Power cord External antennas for Bluetooth/ Wireless connectivity Remote control unit The supplied Sound calibration microphone stand is convenient for use when performing Speaker Calibration.
Important: External Antennas The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the AVR-X4200W. n Connecting the external antennas for Bluetooth/Wireless connectivity For each of the two antennas: 1) Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
Setup There are three steps to the setup process.
2 Connecting the receiver 2.1) Place the receiver near your TV and connect the power cord.
2.2) Connect to the network. Wired LAN Wireless LAN When connecting cables (wired connection), connect a LAN cable between your receiver and your network router. Internet Modem To WAN side When connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.
2.3) Connect the receiver to your TV with an HDMI cable. 2.4) Turn on the TV. HDMI IN $5& HDMI cable 1 OR NIT MO ARC HDMI OUT MONITOR $5& TV remote control unit 2.5) Select the appropriate HDMI input on your TV.
2.6) Turn on the receiver. • Press X to turn on the receiver. 2.7) Verify the connection. • Verify that you can see this screen on your TV. AV Reciever Setup Assistant Please select a language... English Français Español If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
3 Following the On-Screen Setup Assistant The Setup Assistant will walk you through connecting and configuring your speakers and components to your Denon receiver. Please use the remote control and follow the on-screen instructions. AV Reciever Setup Assistant Please select a language...
Owner’s Manual • For more information, visit www.denon.com • Refer to the Online Manual for other functions information and operation procedure details. manuals.denon.com/AVRX4200W/NA/EN/ Online Manual English Overview Connections Playback Contents WEB Manual INTEGRATED NETWORK AV RECEIVER AVR-X4200W Settings Tips Appendix PDF PDF Download Copyright INTEGRATED NETWORK AV RECEIVER c 2015 D&M Holdings Inc. All Rights Reserved.
www.denon.com Printed in China 5411 11305 00AD Copyright © 2015 D&M Holdings Inc. All Rights Reserved.
Microphone Stand Assembly Instructions 1 4 Montageanleitung Mikrofonstander Instructions d'assemblage du support de microphone lstruzioni per il montaggio del supporto microfono lnstrucciones de montaje del soporte del micr6fono 2 Montage-instructies Microfoonstatief Monteringsanvisning for mikrofonstall 111HCTPYK41111 no c6opKe CTOHKII nOA MIIKpooH lnstrukcje montazu stojaka na mikrofon 3 6 '<'1'7A?l/ 1-''fi.I!Jt.trnlta.ll• ~~JXI.
Thank you for your Denon AV receiver purchase! Your receiver is DTS:X ready. To enable DTS:X in your receiver, a firmware update is necessary. Please visit http://www.denon.com/dtsx to learn more. FRANCAIS Merci pour votre confiance et l'achat de cet ampli-tuner AV Denon! Pour beneficier de Ia performance DTS:X sur cet ampli-tuner, il vous suffit d'installer Ia derniere mise a jour logicielle. Pour plus d'informations : bttp_:/Lwww.denon.comld.
Please Read ENGLISH We at Denon appreciate your business. Please accept our thanks for purchasing our product. Your satisfaction with our produ~t is our main concern. (A) Information about firmware update This unit has the ability to update its firmware over the internet. If an update is ~::;;;;:;;;;;:;;::;:;::;:;::::::;;;:;::;;:;;:;;::;;;;;::;;::;~ interrupted or fails, a message (See below) may appear on the receiver front panel. ConnectionFail UPdatin9 fail Download fail Server is busy Lo9in f.
AVR CBL/SAT group TV group VCR/PVR group Audio group BD/DVD group Remote Control Preset Codes (AVR-X4200W) AVR D Denon 73347 CBL/SAT group CBL A B C AT&T Bright House Cable & Wireless Cable One Cablevision Charter Cisco Com Hem Comcast D F I K M N O Cox Daeryung Freebox Insight KabelBW Knology Mediacom Motorola NTL Ono Optus 00858 P 01376, 01877 01068 01376, 01877 01376, 01877 R S Pace 01376, 01877, 01060, 01068 Pioneer 01877 Philips Premiere RCN Rogers 02015 Samsung Scientif
AVR CBL/SAT group V Videotron W WideOpenWest 01877 VTR IP TV A C M P S T V 01877 01376 AT&T 00858 Motorola 01376, 00858, 02378 Cisco Philips Samsung Scientific Atlanta Thomson Verizon 00858, 02378 TV group B C 02174 00858 02174 02378 Apple Netgear Philips Roku Sony Tec Western Digital SAT A D Bush Century CityCom CS Dgtec Digi Raum Electronics Digihome DigitalBox 01272, 03526 Digiwave 03061 DirecTV 02713 Dish Network 03522 Dishpro 02558 DRE DSTV Aurora 00879 Av
AVR CBL/SAT group TV group VCR/PVR group N Netsat 00099 Thomson 00847, 01175 O Onn 01284 Triax 01631 P NPG Optus Orbitech Pace Pacific Panasat Panasonic Philips S Proline SAB Samsung SatyCon Schwaiger SEG Shark SKY SKY Brazil SKY Mexico Sky+ SkyCable Skyplus Skyworth Smart Sony T Strong Technika TechniSat Techwood Telestar 01631 00879, 01356 01195 00847, 01175, 01356 01284 00879 00847 00856, 00099 01284 01631 01377, 01175 01631 01631 01284 01631 00856, 00099, 00847, 011
AVR CBL/SAT group TV group VCR/PVR group Audio group BD/DVD group TV group TV A A.R.
AVR 10556, 11037 Toshiba New Tech 10556 Seelver 11037 11037 TRANScontinents Triad 10556 TVTEXT 95 O.K.
AVR F G H L M P S Ferguson 11037 Hitachi 11037 Goodmans LG Logik Luxor Matsui Panasonic Philips Samsung SEG Sharp Sony T Sylvania Technica Teletech Thomson U V W CBL/SAT group Toshiba United Vestel Weltstar 11037 11423 11037 11037 11037 12170 11454, 10556 12051 11037 10818 TV group VCR/PVR group TV/VCR Combination F G M P R S T Ferguson 10625 Mitsubishi 10556 Grundig Philips Radiola Saba Schneider Sharp Technics Thomson 10556 10556 10556 10625 10556 10818 10556 10625 127
AVR CBL/SAT group TV group VCR/PVR group VCR/PVR group VCR D H P T DirecTV 20739 Philips 20739 Humax TiVo PVR D H P T 20739 20739 DirecTV 20739 Philips 20739 Humax TiVo 20739 20739 7 BD/DVD group Audio group
AVR CBL/SAT group TV group VCR/PVR group Audio group BD/DVD group BD/DVD group DVD 3 A 3D LAB Accurian AEG Akai Alba B C D Aristona Bel Canto Design Blue Parade Clatronic Dantax Denon DSE F G 30675 30675 30675 30539 30539 Durabrand Emerson EuroLine Finlux Funai GFM Go Video GoldStar GPX Grundig H I J K L 31571 M 30675 30675 30741 30675 30675 30741 30741 30741 30539 30675, 30741 Integra JVC Kenwood LG Loewe Luxman Magnavox Marantz Metz Micromedia 30490, 31634, 33698, 32258 3067
AVR Blu-ray Disc CBL/SAT group D F I Denon 32661, 33698, 32258 Insignia 30675 L M LG O O S Funai Integra Magnavox Marantz Onkyo Panasonic Philips Pioneer Samsung Sharp Sony T Y Sylvania Toshiba Yamaha TV group DVD-R VCR/PVR group Accurian 30675 Emerson 30675 30741 A D E F G 32534, 32414 L LG 31641, 32523, 32859 M 30142, 32442 P 32250, 32479, 33313 S 30675 32147 30675 32147 32434 30199 31516, 32178, 32180, 33519 30675 Funai Go Video GPX Loewe Magnavox Medion Panaso
AVR CBL/SAT group TV group VCR/PVR group Audio group CD D M Denon Marantz CD-R D Denon Receiver D Denon 42867, 42868 41985 42868 42857 10 BD/DVD group Audio group
~-----------------------~-- SUIIIOUND 72SURROUNDSP~RS ---------------·----- L ' -~a L -~a L SUBWOOFER2 SUBWOOFER2 : SURROUHO BACK i R SURR()(.W() BACK R ---------------------------------........--- ..... -- ..........................-........ --------..-..-... -.... -- .....-..-..' --- ... -- ....---.................. -............................................................... -...............................................-...............................................................
Wi Fi CERTIFIED
The Denon Extended Protection Plan Today's highly technical products are mechanically and electronically complex, and even the best equipment may need periodic attention that can result in costly repair bills. With the Denon Extended Protection Plan, there are no deductibles or hidden charges. Best of all, if your Denon product is unrepairable, we will replace it, absolutely free with a unit that has similar features and functionality.
Features & Benefits • 1 00°/o coverage on parts & labor • If unrepairable, we'll replace it! • No deductibles or hidden charges • Power surge protection • Unlimited service calls • Nationwide authorized service center network • Service representatives available to assist you 24 hours a day • No Lemon guarantee • Fully insured • Fully transferable CQE1A559Z
To start your Extended Protection Plan coverage: 1. Call us toll-free at (855) 720-0823 (US Residents Only) Have your model number, serial number, and purchase receipt available when calling. 2. Log on to http://servicecontracts.d enon.com Copyright © 2011 D&M Holdings Inc. All Rights Reserved.
Notes on radio DENON (€0470 USA CANADA 0 ~CC Information ., 1For US customers1 0 IC Information (For Canadian customers) 1.1MPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by Denon may void your authority, granted by the FCC, to use the oroduct. 1. PRODUCT This product contains IC: 2581A-CY92024C This product complies with RSS-21 0 of Industry Canada.
KOREA o•lli.:IJT~~~:t• 2.4GHz O)mJ~~fflO)~~HIJfflL- )-@ ~i*c, ""f gc~~c-T>-~L- . a t.J~lillwnt.:LJ, ~a 1.J'1£~Gt.: L) ~ -@DJ/!jg111.J~® L) *~ 0 ;;t;:~t~~>BU!C:ll-:::5< I~W:8H!lill£~ !lll1\ll U:lj \ ~:tJ 7'-~~-Fa:::.,t;z 7 i.>,O)~li!fmiW:1iill~~ill;1L-lL )B;~ o ' ;;T;;~~~ffl~-@ C ~(;::~~fqjO)~~f(~£,~® L) B;i! fuo * l:.rFO);:: c ~ c~S;::"6-? c3!~-r~-tt5n-@;:: ctJ® LJ 7f~oUAi Af~"5f.C ~~ ~~~£ ~f o~ , .2.-§ X]"'l<>!/Ai Af~~ "f' ~ Ei-L-Jcf 3H~ .!f-{:11;lt:ti.C ~~% ~lif~-t.! ll:J.E-L-icf.
Safety Instructions (Read these safety instructions before operating the unit.) 0 SAFETY PRECAUTIONS A CAUTION: CAUTION: ~LECTR~C To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. A IRISK OF SHOCK I .MA. 1 DO NOT OPEN I~ PRECAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
DE NON Congratulations on purchasing this Denon product! We invite you to join the Denon Owner's Club. Thank you for choosing Denon . Be the first to know about upcoming Denon products and get exclusive previews of new technologies. You will also receive members only offers from our online store and be the first in line for all promotions and contests. http://usa .denon.com/us/MyAccount/Pages/Login.aspx Join today ! Please register your product at, USA Customers : http://usa.denon.
! DEN0 N ! LIMITED WARRANTY + (""·••ll•··~ · ·•l~·-..-·••ll••·..-·••ll•:·.,..· ·•ll''·.,..·••ll''·.,.. · ·•ll••· ..- ···~···..-· ·•ll''·..,.. ··•ll•• · ..,..··•ll••...,...··•ll''· ..,...·••ll'• · ..,..·••ll•· ·..,... ,.,,,,...,... .,,l,,, TID• w=~ly w
,,,,,,,..,...,,,fl,.....,,lll•·. . .·•tllto·. . .·••ll''·. . .·•tlll•·. . . ·•tlll~. . .,,,,,,..... ,,lll•. . .·•tlll+·. . .·•lll"t . ~·••ll"·~ · •illl•·. . . ·•tlll•..-·•tiii•· .... ·•Jtll•· .... ·•tlll•·. . . ·•llll•·. . . ·•llll•·.... ·•tlll•· ..... ·••lll•_...,.·,tlll•·. . . ·•tll~· .....·•tlll•· ..... ·•tll''·'*·•ttlll·. . . ·•tlll• . . . ··•l~·· . . . ·•lllt•· . . . ·•llll•·. . .·••llt•·. . . ·••tl''' ...... • ~ This warranty will be honored only in Canada.
~·•llll•· .... ·tilll•·....•tilll•·.... ·•llll•·....·•llll•· .... ·•llll•·.... ·•llll•·.... ·•llll•· .... ·•llll•· .... ·•llll•· .... ·•llll•·.... ·•llll•·.... ·•llll•· .... ·•llll•· .... ·•llll•·.... ·•illl •·.... ·•llll•·.... ·•llll•·.... ·•llll•·.... ·•llll•·.... ·•llll•· .... ·•llll•· ....·••lll• ·.... ·•llll•·.... ·•llll•·.... ·•llll•·....·•llll•· .... ·•llll•· .... ·•llll•· .... ·•llll•·....·•llll•·.... ·•llll. ' !~ t ~ '1 Cette garantie ne sera honoree qu' au Canada.
