Owner's Manual

o
Video Mode
Configure the video processing method to match the type of video
content.
Auto
(Default):
Process video automatically based on
the HDMI content information.
Game:
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Movie:
Perform image processing that is suitable
for contents other than games.
Bypass:
Remove all video processing from the
HDMI video path.
0
If “Video Mode” is set to “Auto”, the mode is switched according to the input
contents.
0
Information displays such as the volume bar cannot be overlaid with the video
signal when “Video Mode” is set to “Bypass”.
0
This item can be set when “HDMI” is assigned for each input source.
o
i/p Scaler
Set the video input signal to be subjected to i/p scaler processing.
i/p Scaler will convert the resolution of the input video signal to the
value set in “Resolution”. (v p. 175)
On: Use i/p scaler function.
Off: Do not use i/p scaler function.
0
This item can be set when “HDMI” is assigned for each input source. It can
also be set when the input source is “Online Music” or “iPod/USB”.
0
This item default setting for “Online Music” and “iPod/USB” is “On”. All others
are set to “Off”.
0
This item can be set when “Video Mode” is set to anything other than
“Bypass”. (v
p. 174)
0
This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
Contents Connections Playback Settings Tips Appendix
174
Front panel Display Rear panel Remote Index