Information Sheet
Technical information
Number of power amps 7 (Front L/R, Center, Surround L/R, Preamplifier section
Surround Back L/R) Input sensitivity/impedance 200 mV / 47 kohms
Frequency response 10 Hz - 100 kHz — +1, –3 dB
Power output 185 watts per channel (DIRECT mode)
Maximum Power Output Per Channel S/N Ratio 100 dB (IHF-A weighted, DIRECT mode)
125 watts per channel FM section
(6 ohms, 1 kHz, THD 0.7%, 2ch driven) Tuning frequency range 87.5 - 108 MHz
AM section
95 watts per channel Tuning frequency range 522 kHz – 1611 kHz
(8 ohms, 20 Hz - 20 kHz, THD 0.08%, 2ch driven) General
Power supply AC 120 V, 60 Hz
Speaker impedance 4 - 16 ohms Power consumption 500 W (Standby 0.1 W, CEC standby 0.5 W)
Power consumption No-Sound 35 W (ECO on), 75 W (ECO o)
Dimensions (W x H x D) 17.1 x 6.6 x 13.3 in.
Weight 20.7 lbs
Ports
IN HDMI (Front 1) x 8
Component x 1
Composite (video) x 2
Analogue Audio x 4
Digital Optical x 2
USB (front) x 1
OUT HDMI Monitor x 2
Zone2 Preout 2.0 ch
Audio Preout (SW) 0.2 ch
Phones x 1
OTHER Ethernet x 1
Microphone Port x 1
FM Tuner Antenna x 1
AM Tuner Antenna x 1
KEY FEATURES [NEW]
•
7.2 channel A/V Receiver with 95W per channel
•
Built-in Wi-Fi with dual antenna; built-in Bluetooth
•
4K/60 Hz full-rate pass-through and 4:4:4 color resolution
•
Video Scaling of analog and digital video signal up to
4K 30/25/24Hz
•
8 HDMI inputs (incl. 1 front) and 2 HDMI outputs
with full HDCP 2.2 support
•
Dolby Atmos (up to 5.1.2)
•
DTS:X ready (via future firmware update)
•
Audyssey MultEQ XT room equalization
•
DSD, FLAC, ALAC and AIFF High Resolution audio streaming
•
AirPlay, Spotify Connect, Internet Radio
•
ECO mode with o/on/auto setting
•
Front panel USB input
•
Control 4 certified IP control capability
STATE-OF-THE-ART DENON SOLUTIONS
FOR MAXIMIZING CONTENT QUALITY
•
Fully discrete, identical quality and power for all channels
(7 channels, 95 watts per channel)
•
Audyssey Dynamic Volume, for real-time volume adjustment
•
Audyssey DynamicEQ, improves surround eects during
low volume levels
•
High-grade audio components
•
High-performance 192kHz/24-bit D/A converters for
all channels
•
Multi-Source/Multi-Room (2nd zone via surround back
speaker terminal or zone preout)
•
Digitally transmitted Play function for iPod and iPhone
(via USB) for best sound quality
•
Optimized Bass redirection, for powerful bass performance
in configurations without subwoofer
EASE-OF-USE AND OTHER FEATURES
•
ECO mode
•
Horizontal color-coded layout of speaker terminals for
easy connection
•
Label sheet for marking Speaker Wires & HDMI Cables
•
Comes with simple, easy-to-use remote control handset
•
Setup Assistant, providing easy-to-follow setup instructions,
and Advanced Graphical User Interface with 3 languages
•
Denon AVR Remote for iOS and Android
•
4 Quick Select buttons - can be used to store favorite
sources, internet radio stations and preferred settings
•
Standby HDMI Pass through
•
Auto Standby and low power consumption at stand-by 0.1 W
Built-in Bluetooth & Wi-Fi
Featuring Bluetooth & Wi-Fi wireless streaming connectivity, the
AVR-X2200W is equipped with an advanced dual antenna RF
transceiver system for robust and error-free streaming, even in
congested urban environments. Connect to the internet through
your home Wi-Fi network (or with a hard-wired connection via
the RJ-45 Ethernet LAN port) and enjoy your favorite tracks from
streaming music services such as Spotify Connect
®
. You can
also choose from thousands of internet radio stations around the
world, and enjoy music from virtually every genre. With AirPlay
®
,
you can enjoy listing to your favorite tracks wirelessly from your
iOS device, including the iPod touch
®
, iPhone
®
and iPad
®
, and the
AVR-X2200W is also DLNA
®
1.5 certified for compatibility with
your home PC or Mac. The Denon 2015 AVR Remote App lets you
easily control the AVR-X2200W with your favorite portable device
and it’s available for both Apple and Android™ devices.
Latest HDMI 2.0a Connectivity; HDCP 2.2 Compatible;
Video Scaling; ISF Certification
Equipped with 8 HDMI inputs, including 1 conveniently located on
the front panel, along with dual HDMI outputs, the AVR-X2200W
incorporates an advanced video processor that features sup-
port for 4K Ultra HD 60 Hz full rate video, 4:4:4 Pure Color sub-
sampling and 21:9 video pass-through, along with support for 3D
content. The AVR-X2200W also features HDCP 2.2 compatibility,
a requirement for 4K Ultra HD copy-protected content and HDR
(Hyper Dynamic Range) and Wide Color Gamut compatibility, key
components of the BT. 2020 4K UHD specification. The video
processor can also upscale analog and digital SD and HD video
to 4K Ultra HD. Certified by the Imaging Science Foundation, the
AVR-X2200W features a full suite of video calibration controls (for
use by an ISF technician), along with ISF Day and ISF Night video
modes.
Easy To Setup, Easy To Use
With our exclusive Setup Assistant along with the Quick Start
Guide, you can connect and configure your home theater system
quickly and easily. The Setup Assistant features clear on-screen
graphics and text that quickly and easily guide you through the
setup process, optimizing critical system settings for the best
possible sound quality. The Advanced Graphical User Interface
and ergonomic remote control makes the daily operation a breeze.
Dolby Atmos Built In; DTS:X™ Ready
For many years, movie surround soundtracks have been channel-
based. Revolutionary Dolby Atmos surround sound technology
dispenses with channel-based coding in favor of more advanced
object-based coding, giving the sound designer the ability to
precisely place sounds anywhere in the 3-dimensional space.
Now, you can enjoy this same award-winning technology at home
with the AVR-X2200W, which features the ability to connect a
5.1 surround sound speaker system and 2 additional overhead
speakers or 2 additional Dolby Atmos-certified up-firing speak-
ers for the ultimate home theater experience. Along with Dolby
Atmos decoding and Dolby Surround Upmixing, the AVR-X2200W
also features Dolby TrueHD lossless decoding and other Dolby
Digital technologies.
The latest immersive surround sound system, DTS:X, features
object-based audio coding that lets the sound designer place
sonic elements anywhere in the 3D acoustic soundspace, and
provides for overhead speakers to deliver a stunning surround
sound experience. DTS:X and DTS Neural:X Upmixer will be
enabled through a future online firmware update. For more info,
please visit www.denon.com/dtsx.
Powerful 7 Channel Discrete Amplifier with Eco Mode
Featuring high current discrete power output devices on all
channels, the AVR-X2200W is rated at 95 watts per channel. For
compatibility with the widest range of loudspeaker models, the
AVR-X2200W is also equipped with low impedance drive capability,
to provide operational stability with speakers rated at 4 ohms. The
Eco mode adjusts the power amplifier’s output according to the
volume level to reduce power consumption and the on-screen Eco
meter lets you see the power consumption reduction in real time.
Audyssey Silver
The AVR-X2200W features the Audyssey Silver suite of DSP
functions, which includes MultEQ XT, Dynamic EQ and Dynamic
Volume. Audyssey MultEQ XT automatic room acoustic meas-
urement and correction system matches your speakers to your
room’s acoustics, for the smoothest, most natural tonal balance.
MultEQ XT provides greater filter precision for the main and satel-
lite speakers, with 8 times the resolution compared to the base
MultEQ system, at up to 8 measurement locations. Audyssey Dy-
namic EQ uses advanced psychoacoustic algorithms to continually
adjust tonal balance so that the sound you hear is full range, even
at lower volume levels, and Audyssey Dynamic Volume smoothes
out annoying volume jumps, especially with loud commercials.
Advanced Quad-Core 32-bit DSP Processor
Featuring an advanced quad-core 32-bit DSP processor, the
AVR-X2200W easily handles multi-thread processing tasks, in-
cluding Dolby Atmos and DTS:X decoding, Audyssey room acoustic
correction, bass management and DSP surround simulation. The
processor features tremendous processing power, with 4 300-MHz
DSP cores that deliver over 1 billion computations per second.
|V01|
Denon Electronics (USA), LLC.
D&M Canada
100 Corporate Drive, Mahwah, New Jersey
07430 USA
TEL 201-762-6500
usa.denon.com ca.denon.com
UPC AVRX2200WBKE3 8-83795-00368-1 Black
The Bluetooth
®
word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc.
is under license.
Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby
Laboratories.
DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the
DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries.
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
Other trademarks and trade names are those of their respective owners.
Denon is a trademark or registered trademark of D&M Holdings, Inc.
* All specs can be subject to change
* Available only in Black