Owner's Manual
Table Of Contents
- Getting Started Guide
- Owners Manual
- Reset
- Table of Contents
- Features
- Video Conversion Function
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a DVD Player / Blu-ray Disc Player
- iPod Playback
- USB Device Playback
- Tuner Operation
- Internet Radio
- Playing Back Files Stored on a PC and NAS
- Viewing Photographs on the Flickr Site
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION Button
- AirPlay
- Convenience Functions
- All Zone Stereo
- Selecting a Sound Mode
- HDMI Control Function
- Sleep Timer Function
- Quick Select Function
- Web Control Function
- Playback in ZONE 2
- Settings
- Specifying the Zone Used with the Remote Control Unit
- Tips
- Troubleshooting
- About HDMI
- Video Conversion Function
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Specs
- Index
- Scan of CD-ROM
- Adhesive Labels
- Warranty
23
Appendix
TipsSettingsPlayback
Contents
Front panel Display Rear panel IndexRemote
Connections
Speaker connection
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
NOTE
•Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn o the subwoofer.
•Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and – sides touch each other (vpage208 “Protection circuit”).
•Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” is running, follow the
instructions in the “Setup Assistant” screen for making connections. (Power is not
supplied to the speaker terminals while the “Setup Assistant” is running.)
•Use speakers with an impedance of 6 – 16 Ω/ohms.
2 Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel o about 3/8 inch (10 mm) of
sheathing from the tip of the speaker
cable, then either twist the core wire
tightly or terminate it.
2
Turn the speaker terminal counterclockwise
to loosen it.
3
Insert the speaker cable’s core wire to the
hilt into the speaker terminal.
4
Turn the speaker terminal clockwise to
tighten it.