Owner's Manual
Table Of Contents
- Getting Started Guide
- Owners Manual
- Reset
- Table of Contents
- Features
- Video Conversion Function
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a DVD Player / Blu-ray Disc Player
- iPod Playback
- USB Device Playback
- Tuner Operation
- Internet Radio
- Playing Back Files Stored on a PC and NAS
- Viewing Photographs on the Flickr Site
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION Button
- AirPlay
- Convenience Functions
- All Zone Stereo
- Selecting a Sound Mode
- HDMI Control Function
- Sleep Timer Function
- Quick Select Function
- Web Control Function
- Playback in ZONE 2
- Settings
- Specifying the Zone Used with the Remote Control Unit
- Tips
- Troubleshooting
- About HDMI
- Video Conversion Function
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Specs
- Index
- Scan of CD-ROM
- Adhesive Labels
- Warranty
166
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Volume Limit
Make a setting for maximum volume.
60 (–20dB) / 70 (–10dB) / 80 (0dB) (Default : 70 (–10dB))
O : Do not set a maximum volume.
2 Power On Volume
Define the volume setting that is active when the power is turned on.
Last (Default) : Use the memorized setting from the last session.
Mute : Always mute when power is turned on.
1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
2 Mute Level
Set the amount of attenuation when muting is on.
Full (Default) : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
%
•This can be set when “Volume Level” (vpage165) is set to “Variable”.
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
Set Defaults : The input source name is returned to the default setting.
%
•Up to 10 characters can be input.
•For character input, see page126.
Quick Select Names
Change the “Quick Select” display title to one you prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
Set Defaults : The input source name is returned to the default setting.
%
•Up to 16 characters can be input.
•For character input, see page126.