Owner's Manual
Table Of Contents
- Getting Started Guide
- Owners Manual
- Reset
- Table of Contents
- Features
- Video Conversion Function
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a DVD Player / Blu-ray Disc Player
- iPod Playback
- USB Device Playback
- Tuner Operation
- Internet Radio
- Playing Back Files Stored on a PC and NAS
- Viewing Photographs on the Flickr Site
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION Button
- AirPlay
- Convenience Functions
- All Zone Stereo
- Selecting a Sound Mode
- HDMI Control Function
- Sleep Timer Function
- Quick Select Function
- Web Control Function
- Playback in ZONE 2
- Settings
- Specifying the Zone Used with the Remote Control Unit
- Tips
- Troubleshooting
- About HDMI
- Video Conversion Function
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Specs
- Index
- Scan of CD-ROM
- Adhesive Labels
- Warranty
157
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Front Height
Set the presence and size of the front height speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies. Note that this
is almost always the best choice.
None : Select when the front height speakers are not connected.
%
•When “Assign Mode” (vpage155) setting is “Front Height”, you can
make the “Front Height” setting.
2 Surr.Back
Set the presence, size and number of surround back speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies. Note that this
is almost always the best choice.
None : Select when the surround back speakers are not connected.
2spkrs (Default) : Use two surround back speakers.
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L)
channel.
%
•When “Assign Mode” (vpage155) setting is “Surround Back”, you can
make the “Surr. Back” setting.