Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Bluetooth PIN (0000)
- Table of Contents
- Video Conversion Function
- iPod / iPhone Compatibility
- Features
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Basic operation
- Playing an iPod
- Playing a USB memory device
- Listening to music on a Bluetooth device
- Listening to FM/AM broadcasts
- Listening to FM/AM broadcasts
- Tuning in by entering the frequency (Direct Tune)
- Changing the tune mode (Tune Mode)
- Tuning in to stations and presetting them automatically (Auto Preset Memory)
- Presetting the current broadcast station (Preset Memory)
- Listening to preset stations
- Specify a name for the preset broadcast station (Preset Name)
- Skipping preset broadcast stations (Preset Skip)
- Cancelling Preset Skip
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- AirPlay function
- Spotify Connect function
- Convenience functions
- Performing repeat playback
- Performing random playback
- Registering to Favorites
- Playing back content added to the “Save to Favorites”
- Deleting content added to favorites
- Searching content with keywords (Text Search)
- Playing back music and a favorite picture at the same time (Slideshow)
- Setting the Slideshow Interval
- Adjusting the volume of each channel to match the input source (Channel Level Adjust)
- Adjusting the tone (Tone)
- Displaying your desired video during audio playback (Video Select)
- Adjusting the picture quality for your viewing environment (Picture Mode)
- Playing the same music in all zones (All Zone Stereo)
- Selecting a sound mode
- HDMI control function
- Smart Menu function
- Sleep Timer function
- Quick select plus function
- Web control function
- Playback in ZONE2 (Separate room)
- Settings
- Appendix
- About HDMI
- Video conversion function
- Playing back a USB memory devices
- Playing back a Bluetooth device
- Playing back a file saved on a PC or NAS
- Playing back Internet Radio
- Personal memory plus function
- Last function memory
- Sound modes and channel output
- Sound modes and surround parameters
- Types of input signals, and corresponding sound modes
- Explanation of terms
- Specifications
- Index
- License
- Tips
- Troubleshooting
- Specs
- Index
- Microphone Stand Assembly Instructions
- DTS:X Ready Information
- Firmware Update Information
- Spotify
- Speaker Wire Labels
- Spec Sheet
- Warranty
TV Format
Set the video signal format to be output for the TV you are using.
o
Format
NTSC
(Default):
Select NTSC output.
PAL: Select PAL output.
0
“Format” can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s TUNER PRESET CH + and TUNE + at the
same time for at least 3 seconds.
“V.Format:<NTSC>” appears on the display.
2. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and
set the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
0
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Contents Connections Playback Settings Tips Appendix
176
Front panel Display Rear panel Remote Index