Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Bluetooth PIN (0000)
- Features
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Settings
- Checking the Information
- About HDMI
- Personal Memory Plus
- Last Function Memory
- Sound Modes and Channel Output
- Sound Modes and Surround Parameters
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Warranty
Listening to FM/AM broadcasts
1
Connect the antenna. (“Connecting an FM/AM
antenna” (v
p. 33))
2
Use FM or AM to switch the input source to “FM” or
“AM”.
G TV screen H
.
01
Tuner
FM 92.1MHz
Tune Preset
-
+
TUNE
Option
OPTION
AUTO
CH+/-
.
01 FM 92.10MHz
GDisplay of this unitH
3
Press MODE to select the tune mode, then press
ENTER.
AUTO
(Default)
:
Automatically search for and tune to a
receivable radio station.
MANUAL:
Manually change the frequency one
step at a time each time the button is
pressed.
4
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0
In “AUTO” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “MANUAL” mode to tune in.
0
You can also scan the broadcast station by pressing TUNE + or TUNE - on the
unit.
Operation buttons Function
MEMORY Register presets
MODE Switching tune mode
TUNE +, - Selects the radio station (up/down)
CHANNEL +, - Selects preset radio stations
Contents Connections Playback Settings Tips Appendix
46
Front panel Display Rear panel Remote Index