PORTUGUÊS AVR-E200 AV SURROUND RECEIVER Getting Started Mise en route / Antes de empezar / Iniciação ESPAÑOL FRANÇAIS ENGLISH
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA Read before use Thank you for purchasing this Denon product. This Getting Started guide will let you quickly and easily setup this unit and connect it to your other devices.
SVENSKA NEDERLANDS ESPAÑOL PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH Connecting the speakers Connect This unit can perform 2.0-channel (two speaker stereo), 2.1-channel (two speakers and a subwoofer) and 5.1-channel (five speakers and a subwoofer) playback. Here, we explain the installation and connection procedure when using 5.1-channel speakers. For the installation procedure when using other than 5.1-channel, see vm page 23 “Installation/connection/setup of speakers (Advanced)”.
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA Preparation Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the this unit, and be sure to connect the channels and polarities correctly. nnConnecting the speaker cable off about 3/8 inch/10 mm of sheathing from the tip of the 1 Peel speaker cable, then either twist the core wire tightly or terminate it.
SVENSKA NEDERLANDS ESPAÑOL PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH Connect Connect Preparation Setup FR FL SW C Playback SL SR 4
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA Before setting up the speakers 1 onnect this unit to the television using an HDMI cable C (sold separately) 3 Insert the main unit power plug into the wall socket When a device supporting Deep Color signal transfer is connected, use a cable compatible “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
SVENSKA NEDERLANDS ESPAÑOL PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH Set up speakers Speaker Config. Levels Crossovers Setup Menu Inputs Speakers General Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Set subwoofer and LFE signal range playback.
ENGLISH DEUTSCH FRANÇAIS FRANÇAIS ESPAÑOL Speaker Config. (Continue) PORTUGUÊS ITALIANO ESPAÑOL Default settings are underlined. to select a speaker, and use 4 oUsepui to select a detailed setting. Subwoofer Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. Front Set the front speaker size. • Large : Use a large speaker that can adequately play back very low bass frequencies.
SVENSKA NEDERLANDS ESPAÑOL Levels PORTUGUÊS ITALIANO FRANÇAIS ESPAÑOL Default settings are underlined. Test Tone Start Set Defaults ENTER Enter BACK Return 1 Levels Test Tone Start Set Defaults Enter BACK Return • When o is pressed while the subwoofer volume is set to “–12 dB”, the “Subwoofer” setting switches to “Off”. • When “Levels” is adjusted, the adjusted values are set for all the surround modes.
ENGLISH DEUTSCH FRANÇAIS FRANÇAIS ESPAÑOL Crossovers (Continue) 2 o pui Use to select a speaker, and use to select the frequency. Front / Center / Surround Select speaker for setting of crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequency. PORTUGUÊS ITALIANO ESPAÑOL Default settings are underlined. 3 Press ENTER to enter the setting. Speakers Speaker Config.
SVENSKA NEDERLANDS ESPAÑOL PORTUGUÊS ITALIANO FRANÇAIS ESPAÑOL FRANÇAIS DEUTSCH ENGLISH Playing a Blu-ray Disc player Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. 3 Adjust the sound volume.
V00 www.denon.com D&M Holdings Inc.
