Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Video Conversion
- Speaker Setup - Audyssey Auto Setup
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Simple Setup Guide
- Connections
- Video Conversion
- Speakers - 7.1 Configuration
- Additional Speaker Configurations / Connections
- HDMI Connections
- Output to TV
- Blu-ray Disc Player
- DVD Player
- Set-Top Box
- Digital Video Recorder
- Digital Camcorder
- iPod Dock
- iPod / USB Device
- Antennas
- Record Player
- CD Player
- DENON LINK Connector
- Multi-Channel Input
- Preamp Output
- Home Network
- Remote Control Jacks
- RS-232 Connection
- Trigger Out Jacks
- ZONE2 / ZONE3 Connections
- Playback - Basic Operation
- Playback - Advanced Operation
- Settings
- Remote Control Operation
- Surround Modes & Parameters
- Video Signals & Monitor Output
- Glossary
- Troubleshooting
- Specs
- Index
- Addendum Sheet
- Napster Offer
- SIRIUS Brochure
- Warranty
56
ENGLISH
Connect
• For the method of connecting 7.1-channel speakers, see page 5.
• For the method of connecting the TV, see page 6.
7.2- or 9.2-channnel (Surround back / Front height /
Front wide speaker) connection
The illustration on the right shows a connection example for performing
7.2-channel or 9.2-channel playback using the surround back, front
height, or front wide speakers.
If you connect the surround back, front height, and front wide speakers
before you start playback, the audio is played back by automatically
switching the speakers in accordance with the surround mode or input
signals.
To set the speakers for automatic switching, select “Amp Assign”
and set “Assign Mode” to “NORMAL” using steps 3 and 4 of “Set up
“Amp Assign”” (vpage63).
n For connecting two subwoofers
Two subwoofers can be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” using the
“Speaker Config.” setting (vpage95).
For speaker impedance and speaker cable connections, see page 5.
FL
FR
C
SBL SBR
SL
SR
FWR
FWL
FHR
FHL
SW1 SW2